> Bit-banding is supported in order to reduce the execution time for
> read-modify-write (RMW) operations to memory.
> With bit-banding, certain regions in the memory map
> (SRAM and peripheral space) can use address aliases to access
> individual bits in one atomic operation.
https://www.ti.com/lit/ug/swcu117i/swcu117i.pdf
> Bit-banding is supported in order to reduce the execution time for
> read-modify-write (RMW) operations to memory.
> With bit-banding, certain regions in the memory map
> (SRAM and peripheral space) can use address aliases to access
> individual bits in one atomic operation.
https://www.ti.com/lit/ug/swcu185d/swcu185d.pdf
Not all MCUs ≥ Cortex-M3 provide the Bit-Banding feature.
It is up to the manufacturer to implement it.
Instead, rely on the CPU_HAS_BITBAND being set in `periph_cpu.h`.
cpu/stm32/qdec: test if callback pointer is set
Callback pointer is not tested and could result in a hard fault
if the pointer is NULL.
Thus only activate interrupt if a callback provided.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
The EFM32 uses the provided _SILICON_LABS_32B_SERIES_0 and
_SILICON_LABS_32B_SERIES_1 definitions to enable or disable certain
code. With the introduction of new MCUs, there is also the
_SILICON_LABS_32B_SERIES_2 definition.
This PR ensures that the defines are explicit, and that #else
statements don't target the wrong series.
Other archs use `_sheap` and `_eheap` to mark the start and end of
the heap.
fe310 uses `_heap_start` and `_heap_end`, so platform independent
code that wants to make use of this will needlessly fail.
For compatibility with common code, name them the same on fe310.
>All of them are features of each ESP SoC and have not to be configured by the
board definition.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
- Use `irq_enable()` over `bl irq_enable`, as `irq_enable()` is an inline
function and not a C function any more
- Drop `__attribute__((naked))` qualifier
- It must be used with the declaration of the function, but there it is
missing. (And it cannot be added there, as this function would need to
be implemented as "naked" by every platform; which is impossible for
platforms not supporting `__attribute__((naked))`.)
- Only functions consisting completely of basic asm may be marked as naked.
But both the assembly used to trigger the SVC interrupt as well as the
assembly used in `irq_enable()` are extended asm, not basic asm
- Use ` UNREACHABLE();` over a custom asm construct
There are common features that can be used by ESP32 as well as ESP8266, for example the `esp_wifi` module. To be able to test for any ESP SoC, feature `arch_esp` is introduced.
