RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
37,585 Commits 40 Branches 189 Tags 262 MiB
f9f95534f6
Commit Graph

2025 Commits

Author SHA1 Message Date
benpicco
0bc80250cf
Merge pull request #15101 from benpicco/sys/net/uhcp-log 
sys/net/uhcp: use LOG_xxx functions
 2020-09-30 11:08:53 +02:00
Martine Lenders
9631576b22
gnrc_ipv6_nib: make ARO extra status codes also available without 6LN 2020-09-29 10:45:12 +02:00
Martine Lenders
04f6e06dd4
gnrc_ipv6_nib: only multicast probe UNREACHABLE neighbor if 6LR 
Non-routing 6LNs do not have to join the solicited nodes address, so
probing for a neighbor using that address may be in vain and only
spamming the LLN with unnecessary messages. RFC 6775 basically assumes
this in section 5.2:

> There is no need to join the solicited-node multicast address, since
> nobody multicasts NSs in this type of network.
 2020-09-29 10:45:12 +02:00
Benjamin Valentin
f163f1580b sys/net/uhcp: use LOG_ functions 
Using `gnrc_border_router` with `uhcp` is quite noisy.
uhcpc will regularly refresh the prefix and print a bunch of status messages.

Allow the user to tone it down by setting a higher `LOG_LEVEL`.
For this, convert calls to `printf()` and `puts()` to `LOG_xxx()`.

This requires a dummy header for `uhcpd`.
 2020-09-29 09:55:28 +02:00
Martine Lenders
555c62de51
gnrc_ipv6_nib: set NCE stale on incoming ARO 
In accordance with RFC 6775, section 5.2 an NCE should be set STALE
when an ARO renews the address registration for the address:

> The routers SHOULD NOT garbage-collect Registered NCEs (see
> Section 3.4), since they need to retain them until the Registration
> Lifetime expires.  Similarly, if NUD on the router determines that
> the host is UNREACHABLE (based on the logic in [RFC4861]), the NCE
> SHOULD NOT be deleted but rather retained until the Registration
> Lifetime expires.  A renewed ARO should mark the cache entry as
> STALE.  Thus, for 6LoWPAN routers, the Neighbor Cache doesn't behave
> like a cache.  Instead, it behaves as a registry of all the host
> addresses that are attached to the router.
 2020-09-24 13:13:43 +02:00
Martine Lenders
711ea275e9
Merge pull request #15042 from maribu/gnrc_dont_include_xtimer_when_not_used 
sys/net/gnrc/netif: Fix compilation on waspmote-pro
 2020-09-23 13:37:36 +02:00
Marian Buschsieweke
28d4bf7751
sys/net/gnrc/pktbuf_static: Fix alignment 
The buffer _pktbuf was previously only aligned to a 1 byte boundary. This could
result in run time issues.
 2020-09-22 15:04:56 +02:00
Marian Buschsieweke
8a5d301caa
sys/net/gnrc/netif: Fix compilation on waspmote-pro 
xtimer.h must not be included, when the xtimer module is not use. Otherwise
compilation on the waspmote-pro with https://github.com/RIOT-OS/RIOT/pull/14799
will not longer work. gnrc_netif_pktq includes xtimer.h and uses xtimer, but
gnrc_netif includes gnrc_netif_pktq.h regardless of whether gnrc_netif_pktq
is used. This makes sure that gnrc_netif_pktq.h is only included when actually
used.
 2020-09-22 11:51:09 +02:00
Marian Buschsieweke
1d1b446d6b
sys/net/gnrc/netif: use IS_USED macro 2020-09-22 11:50:18 +02:00
Marian Buschsieweke
0cb274c1eb
sys/net/gnrc: Fix include of xtimer.h 
Make sure xtimer.h is only included if the xtimer module is actually used, as
otherwise compilation for the waspmote-pro fails.
 2020-09-16 19:55:43 +02:00
Francisco
cb6b65e7ff
Merge pull request #14886 from miri64/gnrc/fix/circ-deps 
gnrc: remove circular module dependencies
 2020-09-09 09:06:28 +02:00
Martine Lenders
ec436b9069
Merge pull request #14963 from miri64/gnrc_sock_ip/fix/sock 
gnrc_sock_ip: fix NULL pointer dereference
 2020-09-08 17:15:25 +02:00
Martine S. Lenders
7d47484170
gnrc_sock_ip: fix NULL pointer dereference 2020-09-08 13:05:10 +02:00
Martine S. Lenders
2cf5b3c185
gnrc_ipv6_hdr: make HDR_NETTYPE dependent on nettype module 
In #13994 this was introduced but overlooked here.
 2020-09-08 12:53:29 +02:00
Martine S. Lenders
0e3443d006
gnrc_netif: guard usage of gnrc_ipv6 member 2020-09-08 12:53:29 +02:00
Martine S. Lenders
4fe7bb003a
gnrc_ipv6_nib: add missing header includes 2020-09-08 12:53:29 +02:00
benpicco
c7993b6140
Merge pull request #14961 from miri64/gnrc_rpl/fix/check-idx 
gnrc_rpl: check index after fetching address from netif
 2020-09-07 14:24:44 +02:00
benpicco
a084430be3
Merge pull request #14883 from miri64/gnrc_ipv6_nib/fix/ipv6_addr_idx-check 
gnrc_ipv6_nib: check return value of gnrc_netif_ipv6_addr_idx()
 2020-09-07 14:24:17 +02:00
Martine S. Lenders
91dfee7ee0
gnrc_ipv6_nib: fix duplicate handling for ARO 
When `nce` is NULL on the duplicate check, the later re-fetching of the
`nce` might result in an actual NCE entry that then contains a
duplicate, so we need to re-check the EUI-64 again as well.
 2020-09-07 08:42:50 +02:00
Martine S. Lenders
f9c3e5f5a4
gnrc_ipv6_nib: check return value of gnrc_netif_ipv6_addr_idx() 
And acquire exclusive network interface access when necessary.

Fixes #14752.
 2020-09-07 08:42:50 +02:00
Martine S. Lenders
f7913b3d47
gnrc_rpl: check index after fetching address from netif 2020-09-07 08:39:29 +02:00
Martine Lenders
a72d0ef3e8
gnrc_netif: add packet to queue when device is busy 
... and also send on send error (i.e. when *medium* was busy)
 2020-09-02 12:30:23 +02:00
Martine Lenders
7c7f667108
gnrc_netif: add a send queue 2020-09-02 12:30:22 +02:00
Cenk Gündoğan
538155c344
Merge pull request #14904 from leandrolanzieri/pr/kconfig/change_prefix_convention 
treewide: modify Kconfig symbol prefixes
 2020-09-01 15:57:06 +02:00
Martine S. Lenders
3b7bab1108
gnrc_ipv6_nib_nc: error on non-link-local address without ARSM 2020-09-01 11:12:55 +02:00
Martine S. Lenders
14efa3185b
gnrc_ipv6_nib: don't add dst from PL to NC without ARSM 2020-09-01 11:12:55 +02:00
Leandro Lanzieri
d25fc243c4
treewide: change prefix for generated Kconfig symbols. 
This changes the prefixes of the symbols generated from USEMODULE and
USEPKG variables. The changes are as follow:

   KCONFIG_MODULE_ => KCONFIG_USEMODULE_
   KCONFIG_PKG_ => KCONFIG_USEPKG_
   MODULE_ => USEMODULE_
   PKG_ => USEPKG_
 2020-08-31 09:37:09 +02:00
Martine Lenders
4ba5367755
Merge pull request #7664 from zhuoshuguo/lwmac_radio_reinit 
LWMAC: add re-initialize radio support.
 2020-08-26 18:58:56 +02:00
benpicco
9f2475dc14
Merge pull request #14832 from maribu/sys-cleanup 
sys: Cleanup access to internal variables
 2020-08-26 17:07:19 +02:00
benpicco
2eb6d752df
Merge pull request #14770 from benpicco/netif_addr_to_str 
net/netif: move gnrc_netif_addr_to/from_str() to netif
 2020-08-25 18:52:55 +02:00
Martine Lenders
ec3464aaeb
Merge pull request #14788 from leandrolanzieri/pr/fuzzing/select_gnrc_pktbuf_malloc 
fuzzing: select gnrc_pktbuf_malloc implementation
 2020-08-25 16:05:46 +02:00
Leandro Lanzieri
ff8079b109
fuzzing: select gnrc_pktbuf_malloc implementation 2020-08-25 09:24:50 +02:00
Marian Buschsieweke
3b6fa61829
sys: Cleanup access to internal variables 
Replace direct accesses to sched_active_thread and sched_active_pid with
the helper functions thread_getpid() and thread_get_active(). This serves
two purposes:

1. It makes accidental writes to those variable from outside core less likely.
2. Casting off the volatile qualifier is now well contained to those two
   functions
 2020-08-24 20:28:11 +02:00
Hauke Petersen
d8aa76501a net/gnrc/rpl: fix default route lifetime 
On receiving a DIO message, RPL sets the lifetime for the default
route and the parent timeout event to the value. This leads to short
amounts of time whem the node looses its default route, while it
handles the parent timeout event to probe its parent.

This commit fixes this by adding time the node needs for probing
to the default route lifetime.
 2020-08-24 17:53:00 +02:00
Hauke Petersen
05347190b9 net/gnrc/nib_ft.c: fix minor typo in comment 2020-08-21 16:06:04 +02:00
Martine Lenders
66de39a20a
gnrc_sixlowpan_frag_rb: Check possibly uninitialized pointers 2020-08-20 23:51:38 +02:00
Benjamin Valentin
decadc41a0 drivers/dose: register driver with netdev 2020-08-17 22:53:51 +02:00
Benjamin Valentin
4f19b54b7b drivers/at86rf215: register driver with netdev 2020-08-17 22:53:51 +02:00
Benjamin Valentin
53eedc283b drivers/at86rf2xx: register driver with netdev 2020-08-17 22:53:51 +02:00
Benjamin Valentin
39951a948e net/netif: move gnrc_netif_addr_to/from_str() to netif 
These functions are independent from GNRC and can be used by stack-agnistoc
code.
Avoid pulling in a GNRC dependency by moving those two helper functions to
`netif`.

The old function names are kept as `static inline` wrapper functions to avoid
breaking API users.
 2020-08-16 23:52:32 +02:00
zhuoshuguo
d3c87d7bb9 lwmac: add re-initialize radio support. 2020-08-15 22:12:36 +08:00
Benjamin Valentin
2ed7f66d33 gnrc_sixlowpan_iphc: fix last byte of iphc_hdr always being 0 
Coverty scan found this:

> CID 298295 (#1 of 1): Operands don't affect result (CONSTANT_EXPRESSION_RESULT) result_independent_of_operands:
> (ipv6_hdr_get_fl(ipv6_hdr) & 255) >> 8 is 0 regardless of the values of its operands.

Looking at the code, this appears to be a copy & paste error from the previous line.
 2020-08-11 14:09:28 +02:00
Benjamin Valentin
a9a0671232 gnrc_sixlowpan_iphc: fix Out-of-bounds read 
Coverty scan found this:

> CID 298279 (#1 of 1): Out-of-bounds read (OVERRUN)
> 21. overrun-local: Overrunning array of 16 bytes at byte offset 64 by dereferencing pointer

The original intention was probably to advance the destination pointer by 4 bytes, not
4 * the destination type size.
 2020-08-11 13:31:22 +02:00
Kaspar Schleiser
acd47f0c1f gnrc_tcp: abs() -> labs() for int32_t 
Fixes compilation on msp430 and probably avr.
 2020-08-05 14:32:58 +02:00
Martine Lenders
b043e1fa64
Merge pull request #14683 from miri64/gnrc_sixlowpan_frag_vrb/fix/cppcheck-warning 
gnrc_sixlowpan_frag_vrb: fix cppcheck warning
 2020-08-03 13:15:52 +02:00
Martine S. Lenders
5885293e9e
gnrc_sixlowpan_frag_vrb: fix cppcheck warning 
... which wasn't a false positive after all.
 2020-08-03 12:29:06 +02:00
Benjamin Valentin
6af92ee113 gnrc/nib: fix _idx_dsts() calculation 
Using pointer difference already gives us the number of elements of
size of what the pointer is pointing to.
Dividing by size will lead to the wrong (always 0) result.
 2020-08-03 11:35:54 +02:00
Jose Alamos
96ee1d2bf8 net/gnrc_netif_lorawan: fix unaligned copy 2020-07-13 16:57:26 +02:00
Leandro Lanzieri
cdc252ab7b
net/gnrc/nettest: Remove module 
This module has been deprecated and scheduled for removal in release
2020.07.
 2020-07-10 15:58:54 +02:00
Akshai M
c75df9c5ca gnrc/lwmac : Expose to Kconfig 
Expose configurations to Kconfig
 2020-07-08 10:04:45 +05:30
Akshai M
a05eb3b4ad gnrc/lwmac : Move GNRC_LWMAC_MAX_DATA_TX_RETRIES to 'CONFIG_' 2020-07-08 10:04:45 +05:30
Akshai M
cda7791a4b gnrc/lwmac : Move GNRC_LWMAC_DATA_CSMA_RETRIES to 'CONFIG_' 2020-07-08 10:04:45 +05:30
Akshai M
e241141a92 gnrc/lwmac : Move GNRC_LWMAC_DATA_DELAY_US to 'CONFIG_' 2020-07-08 10:04:45 +05:30
Akshai M
1fe5acddc6 gnrc/lwmac : Move GNRC_LWMAC_WR_PREPARATION_US to 'CONFIG_' 2020-07-08 10:04:45 +05:30
Akshai M
85948925ba gnrc/lwmac : Move GNRC_LWMAC_TIMEOUT_COUNT to 'CONFIG_' 2020-07-08 10:04:45 +05:30
Akshai M
3bd8dd4aa2 gnrc/lwmac : Move GNRC_LWMAC_BROADCAST_CSMA_RETRIES to 'CONFIG_' 2020-07-08 10:04:45 +05:30
Akshai M
65fa832e40 gnrc/lwmac : Move GNRC_LWMAC_MAX_RX_EXTENSION_NUM to 'CONFIG' 2020-07-08 10:04:45 +05:30
Akshai M
e38dca5d42 gnrc/lwmac : Move GNRC_LWMAC_TIME_BETWEEN_WR_US to 'CONFIG_' 2020-07-08 10:04:45 +05:30
Akshai M
1be3264ab3 gnrc/lwmac : Move GNRC_LWMAC_WAKEUP_INTERVAL_US to 'CONFIG_' 2020-07-08 10:04:45 +05:30
Simon Brummer
122616ae7d gnrc_tcp: add retransmission timer 2020-07-06 21:18:23 +02:00
Simon Brummer
67b22d8783 gnrc_tcp: requested changes 2020-07-04 09:21:50 +02:00
Simon Brummer
aa1c2e9cba gnrc_tcp: rewrite API internal messaging 2020-07-04 09:20:43 +02:00
Martine Lenders
1245065afb
Merge pull request #14291 from brummer-simon/gnrc_tcp-move_rcv_buffer_handling 
gnrc_tcp: rewrite recv buffer allocation/returning
 2020-07-01 17:19:28 +02:00
Simon Brummer
9fe91f5c44 gnrc_tcp: rewrite recv buffer allocation/returning 2020-07-01 15:47:23 +02:00
Gunar Schorcht
b51ac69d0a sys/net/gnrc: add netif support for ATWINC15x0 netdef driver 2020-06-26 12:33:38 +02:00
Gunar Schorcht
a440ae7bd9 gnrc/icmpv6: redefinition of MIN macro 
Since `min(a,b)` is a very frequently used function, several libraries such as ESP8266 SDK define a `MIN` macro in their header files. Therefore the `MIN` macro should be undefined before its definition to avoid compilation errors if it is defined anywhere else before.
 2020-06-25 17:31:07 +02:00
Akshai M
d2342b6e26 gnrc/gomach : Expose configurations to Kconfig 2020-06-18 21:21:50 +05:30
Akshai M
676a39cebb gnrc/gomach : Move GNRC_GOMACH_MAX_T2U_RETYR_THRESHOLD to 'CONFIG_' 2020-06-18 21:21:50 +05:30
Akshai M
89360577a0 gnrc/gomach : Move GNRC_GOMACH_T2U_RETYR_THRESHOLD to 'CONFIG_' 2020-06-18 21:21:50 +05:30
Akshai M
b9773263c0 gnrc/gomach : Move GNRC_GOMACH_REPHASELOCK_THRESHOLD to 'CONFIG_' 2020-06-18 21:21:50 +05:30
Akshai M
6b10059b8a gnrc/gomach : Move GNRC_GOMACH_MAX_ALLOC_SENDER_NUM to 'CONFIG_' 2020-06-18 21:21:50 +05:30
Akshai M
3274a6b83e gnrc/gomach : Move GNRC_GOMACH_RX_DUPCHK_UNIT_LIFE to 'CONFIG_' 2020-06-18 21:21:50 +05:30
Akshai M
a8cad3715d gnrc/gomach : Move GNRC_GOMACH_CP_EXTEND_THRESHOLD to 'CONFIG_' 2020-06-18 21:21:50 +05:30
Akshai M
62a3be9eee gnrc/gomach : Move GNRC_GOMACH_TX_BUSY_THRESHOLD to 'CONFIG_' 2020-06-18 21:21:50 +05:30
Akshai M
025c1e0509 gnrc/gomach : Move GNRC_GOMACH_VTDMA_SLOT_SIZE_US to 'CONFIG_' 2020-06-18 21:21:50 +05:30
Akshai M
9b7b3fef42 gnrc/gomach : Move GNRC_GOMACH_BCAST_INTERVAL_US to 'CONFIG_' 2020-06-18 21:15:28 +05:30
Akshai M
6aa0418da4 gnrc/gomach : Move GNRC_GOMACH_PREAMBLE_INTERVAL_US to 'CONFIG_' 2020-06-18 21:15:28 +05:30
Akshai M
48a2fc57e0 gnrc/gomach : Move GNRC_GOMACH_MAX_PREAM_INTERVAL_US to 'CONFIG_' 2020-06-18 21:15:28 +05:30
Akshai M
a0a6dc0e4e gnrc/gomach : Move GNRC_GOMACH_NO_TX_ISR_US to 'CONFIG_' 2020-06-18 21:15:28 +05:30
Akshai M
ae175987d5 gnrc/gomach : Move GNRC_GOMACH_WAIT_RX_END_US to 'CONFIG_' 2020-06-18 21:15:28 +05:30
Akshai M
588200f515 gnrc/gomach : Move GNRC_GOMACH_CP_MIN_GAP_US to 'CONFIG_' 2020-06-18 21:15:28 +05:30
Akshai M
1505ea8e11 gnrc/gomach : Move GNRC_GOMACH_CP_RANDOM_END_US to 'CONIFG_' 2020-06-18 21:15:28 +05:30
Akshai M
e6da0bab49 gnrc/gomach : Move GNRC_GOMACH_SUPERFRAME_DURATION_US to 'CONFIG_' 2020-06-18 21:15:28 +05:30
Akshai M
ab3e197c3f gnrc/gomach : Move GNRC_GOMACH_CP_DURATION_US to 'CONFIG_' 2020-06-18 21:07:30 +05:30
Martine Lenders
09d097c934
Merge pull request #14214 from btcven/2020_06_06-6lo-mtu 
net/gnrc/netif: add option for non-std 6lo MTU
 2020-06-18 15:25:01 +02:00
Jean Pierre Dudey
e1ef082d49
net/gnrc/netif: disable 6lo fragmentation when unneeded 
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
 2020-06-18 07:16:16 -05:00
Jean Pierre Dudey
d47f4a1caa
net/gnrc/netif: add option for non-std 6lo MTU 
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
 2020-06-18 07:16:16 -05:00
Leandro Lanzieri
3ce8efd4cb
Merge pull request #14138 from akshaim/Kconfig_mac 
gnrc/mac : Expose configurations to Kconfig
 2020-06-17 18:12:40 +02:00
Akshai M
25f778b552 gnrc/mac : Expose to Kconfig 
Expose configurations to Kconfig

Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-06-15 12:28:57 +05:30
Akshai M
9ddc9e0633 gnrc/mac : Move GNRC_MAC_NEIGHBOR_COUNT to 'CONFIG_' 2020-06-15 12:19:37 +05:30
Leandro Lanzieri
dbfe0d8ea1
gnrc/sock: Configure mbox size with exponent and add config doc group 
This changes the configuration macro to be the exponent of 2^n, as the
mbox buffer size needs to be always power of 2. The macro now has the
GNRC prefix.

Also a compile configuration documentation group is created.
 2020-06-15 07:30:54 +02:00
Leandro Lanzieri
d4cac38cc9
gnrc/tcp: Configure mbox size with exponent and add config doc group 
This changes the configuration macro to be the exponent of 2^n, as the
mbox buffer size needs to be always power of 2.

Also a compile configuration documentation group is created.
 2020-06-15 07:30:54 +02:00
Leandro Lanzieri
375cad38df
gnrc/sixlowpan: Configure queue size with exponent 
This changes the configuration macro to be the exponent of 2^n, as the
message queue size needs to be always power of 2.
 2020-06-15 07:30:52 +02:00
Leandro Lanzieri
05962fe3ef
gnrc/netif: Configure queue size with exponent 
This changes the configuration macro to be the exponent of 2^n, as the
message queue size needs to be always power of 2.
 2020-06-15 07:30:52 +02:00
Leandro Lanzieri
3dc7865c4e
gnrc/rpl: Configure queue size with exponent 
This changes the configuration macro to be the exponent of 2^n, as the
message queue size needs to be always power of 2.
 2020-06-15 07:30:51 +02:00
Leandro Lanzieri
b0168f5fdd
gnrc/ipv6: Configure queue size with exponent 
This changes the configuration macro to be the exponent of 2^n, as the
message queue size needs to be always power of 2.
 2020-06-15 07:30:50 +02:00
Akshai M
6450d9989e gnrc/pktbuf : Set Kconfig defaults and conditions 
Set Kconfig defaults for CPU and conditions to avoid
conflict with CFLAGS

Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-06-11 14:47:27 +05:30
Akshai M
cabcfae9e0 gnrc/pktbuf : Expose to Kconfig 
Expose CONF_GNRC_PKTBUF_SIZE to Kconfig
 2020-06-11 14:47:19 +05:30
Akshai M
5523d119b6 gnrc/pktbuf : Move 'GNRC_PKTBUF_SIZE' to 'CONFIG_' 2020-06-11 14:46:36 +05:30
Martine Lenders
f9bed00701
Merge pull request #12738 from miri64/netif/enh/id-functions 
netif: add functions to get and get by identifier
 2020-06-09 15:12:06 +02:00
Martine Lenders
9270f31859
Merge pull request #14071 from akshaim/Kconfig_pktdump 
gnrc/pktdump : Expose Configurations to Kconfig
 2020-06-09 11:13:36 +02:00
Akshai M
27e0d7cf11 gnrc/pktdump : Add 'CONFIG_' & expose to Kconfig 
Introduced 'GNRC_PKTDUMP_MSG_QUEUE_SIZE_EXP' to hold exponent
value and made GNRC_PKTDUMP_MSG_QUEUE_SIZE dependant on
GNRC_PKTDUMP_MSG_QUEUE_SIZE_EXP.

Moved 'GNRC_PKTDUMP_MSG_QUEUE_SIZE_EXP' to 'CONFIG_' namespace.

Exposed configurations to Kconfig

Co-authored-by: Martine Lenders <mail@martine-lenders.eu>

Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-06-09 13:31:29 +05:30
Alexandre Abadie
821eb5bc76
sys/net/auto_init: remove useless preprocessor directives 
The files are now built only when the corresponding module is used
 2020-06-08 11:10:39 +02:00
Alexandre Abadie
29c5c54fe2
sys/net/auto_init: only build files when related module is used 2020-06-08 11:10:22 +02:00
Alexandre Abadie
3fe35e755c
sys/net/auto_init: rename cdcecm source file 
Use a name that corresponds to the related module name
 2020-06-08 10:27:35 +02:00
Jean Pierre Dudey
60385d2c24
net/gnrc/netif: limit 6lo frag size 
The 6Lo network interfaces can only support a max_frag_size of
SIXLOWPAN_FRAG_MAX_LEN (2047 bytes) as the length field is only 11-bits.

This limits the max_frag_size in the case that the L2-PDU is higher than
that.

Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
 2020-06-07 15:43:33 -05:00
Leandro Lanzieri
7262b1d4d9
Merge pull request #14126 from akshaim/Kconfig_tcp 
gnrc/tcp : Expose configurations to Kconfig
 2020-06-03 08:32:26 +02:00
Francisco
cf7125d4cf
Merge pull request #14172 from benpicco/sys/net/gnrc/netif/gnrc_netif_relax_assert 
gnrc_netif: relax 6lo MTU assertion for 802.15.4g
 2020-06-02 13:53:36 +02:00
Akshai M
c191b009a3 gnrc/tcp : Expose to Kconfig 
Expose configurations to Kconfig
 2020-06-02 15:46:44 +05:30
Akshai M
badeb74d16 gnrc/tcp : Move GNRC_TCP_DEFAULT_WINDOW to 'CONFIG_' 2020-06-02 15:46:44 +05:30
Akshai M
49df2258e3 gnrc/tcp : Move GNRC_TCP_PROBE_UPPER_BOUND to 'CONFIG_' 2020-06-02 15:46:44 +05:30
Akshai M
d6904349a9 gnrc/tcp : Move CONFIG_GNRC_TCP_PROBE_LOWER_BOUND to 'CONFIG_' 2020-06-02 15:46:44 +05:30
Akshai M
27f9d2def6 gnrc/tcp : Move GNRC_TCP_RTO_K to 'CONFIG_' 2020-06-02 15:46:44 +05:30
Akshai M
e42cc62edc gnrc/tcp : Move GNRC_TCP_RTO_B_DIV to 'CONFIG_' 2020-06-02 15:46:44 +05:30
Akshai M
f704a1e5c9 gnrc/tcp : Move GNRC_TCP_RTO_A_DIV to 'CONFIG_' 2020-06-02 15:46:44 +05:30
Akshai M
f25c21988d gnrc/tcp : Move GNRC_TCP_RTO_GRANULARITY to 'CONFIG_' 2020-06-02 15:46:44 +05:30
Akshai M
c599c65124 gnrc/tcp : Move GNRC_TCP_RTO_UPPER_BOUND to 'CONFIG_' 2020-06-02 15:46:44 +05:30
Akshai M
ea79c71ce8 gnrc/tcp : Move GNRC_TCP_RTO_LOWER_BOUND to 'CONFIG_' 2020-06-02 15:46:44 +05:30
Akshai M
648247592c gnrc/tcp : Move GNRC_TCP_RCV_BUFFERS to 'CONFIG_' 2020-06-02 15:46:44 +05:30
Akshai M
e8b13ab44d gnrc/tcp : Move GNRC_TCP_MSS to 'CONFIG_' 2020-06-02 15:46:44 +05:30
Akshai M
0b3e0de03e gnrc/tcp : Move GNRC_TCP_MSL to 'CONFIG_' 2020-06-02 15:46:44 +05:30
Akshai M
01dd8e4fa8 gnrc/tcp : Move GNRC_TCP_CONNECTION_TIMEOUT_DURATION to 'CONFIG_' 2020-06-02 15:46:44 +05:30
Benjamin Valentin
840be824d4 gnrc_netif: relax 6lo MTU assertion for 802.15.4g 
802.15.4g devices have a 2047 byte PDU.
So the assertion `netif->ipv6.mtu == IPV6_MIN_MTU` is too strict here.

This is only enforced on init, so changing the modulation at run-time
did not catch this bug.

To test, use e.g. `at86rf215` with

    CFLAGS += -DAT86RF215_DEFAULT_PHY_MODE=IEEE802154_PHY_MR_OQPSK

fixes #14164
 2020-05-29 15:59:23 +02:00
Sören Tempel
a8b0491751 gnrc_pktbuf_malloc: add comment to fuzzing termination condition 2020-05-26 17:24:44 +02:00
Sören Tempel
f37c1fd9dd gnrc_sock: add comment to fuzzing termination condition 2020-05-26 17:24:43 +02:00
Sören Tempel
3314388417 sock_async_event: Implement termination condition for fuzzing 
See: 65c7bbf76d.
 2020-05-26 17:24:40 +02:00
Sören Tempel
729e0f95ac gnrc_sock: Export prevpkt and rename it to gnrc_sock_prevpkt 
This is a perquisite for fuzzing applications using sock_async_event.
 2020-05-26 17:24:39 +02:00
benpicco
70543bba1d
Merge pull request #13275 from miri64/gnrc_ipv6_ext_opt/feat/initial 
gnrc_ipv6_ext_opt: initial import
 2020-05-20 14:35:58 +02:00
Martine S. Lenders
d04621fc43
gnrc_ipv6_ext_opt: initial import 
This provides header parsing for IPv6 hop-by-hop and destination
options according to [RFC 8200].

[RFC 8200]: https://tools.ietf.org/html/rfc8200#section-4.2
 2020-05-20 12:34:04 +02:00
Benjamin Valentin
3974a04623 gnrc/nib: add NIB event bus 
Add a message bus where threads can listen for nib events.

Currently only the GNRC_IPV6_NIB_EVENT_ADDR_VALID event is
implemented which informs subscribers that an address got
valid.
 2020-05-20 10:44:11 +02:00
Benjamin Valentin
85100ad61a gnrc_netif: add message bus to interface 
Allow threads to listen for events on an interface.
 2020-05-20 10:44:11 +02:00
Leandro Lanzieri
16113afb1e
Merge pull request #14026 from miri64/gnrc_netif/fix/deps 
gnrc_netif: use gnrc_netif-submodules to pull in upper-layer struct members
 2020-05-19 16:36:18 +02:00
Martine S. Lenders
a48629b395
gnrc_netif: introduce gnrc_netif_ipv6 pseudo-module for IPv6 members 
This aims to reduce circular dependencies in GNRC.
 2020-05-19 16:10:59 +02:00
Martine S. Lenders
9801a439fc
gnrc_netif: introduce gnrc_netif_6lo pseudo-module for 6LoWPAN members 
This aims to reduce circular dependencies in GNRC.
 2020-05-19 16:10:59 +02:00
Martine S. Lenders
0d2f0a5ba4
gnrc_netif: fix gnrc_netif_lorawan dependencies 2020-05-19 16:10:58 +02:00
Michel Rottleuthner
740bb4e32e sys/net/gnrc/sock: release pktsnip when message queue is full 2020-05-15 18:24:42 +02:00
Ken Bannister
f81dda2174
Merge pull request #14059 from miri64/gnrc_sock/fix/re-recv-signal 
gnrc_sock: re-issue MSG_RECV event if there are still received messages after `*_recv()` was called.
 2020-05-15 11:38:32 -04:00
Leandro Lanzieri
4b3bfd3c83
gnrc/rpl: Expose configurations to Kconfig 2020-05-14 15:57:02 +02:00
Leandro Lanzieri
8ce77f2045
gnrc/rpl: Move GNRC_RPL_MSG_QUEUE_SIZE to 'CONFIG_' namespace 2020-05-14 15:57:02 +02:00
Leandro Lanzieri
2c04f54d28
gnrc/rpl: Move GNRC_RPL_DEFAULT_NETIF to 'CONFIG_' namespace 2020-05-14 15:57:01 +02:00
Leandro Lanzieri
d075b4dfe9
gnrc/rpl: Move GNRC_RPL_PARENT_TIMEOUT_DIS_RETRIES to 'CONFIG_' 2020-05-14 15:57:01 +02:00
Leandro Lanzieri
e547061d19
gnrc/rpl: Move GNRC_RPL_DEFAULT_INSTANCE to 'CONFIG_' namespace 2020-05-14 15:57:01 +02:00
Leandro Lanzieri
5a28e7cad4
gnrc/rpl: Move GNRC_RPL_DEFAULT_MAX_RANK_INCREASE to 'CONFIG_' 2020-05-14 15:57:00 +02:00
Leandro Lanzieri
1b6f915e0c
gnrc/rpl: Move GNRC_RPL_DEFAULT_MIN_HOP_RANK_INCREASE to 'CONFIG_' 2020-05-14 15:57:00 +02:00
Leandro Lanzieri
cd50686eb6
gnrc/rpl: Move GNRC_RPL_WITHOUT_VALIDATION to 'CONFIG_' namespace 
Also check its value using IS_ACTIVE when possible.
 2020-05-14 15:57:00 +02:00
Leandro Lanzieri
02b10105c1
gnrc/rpl: Move GNRC_RPL_DODAG_CONF_OPTIONAL_ON_JOIN to 'CONFIG_' 2020-05-14 15:56:59 +02:00
Leandro Lanzieri
dfa722c519
gnrc/rpl: Move GNRC_RPL_WITHOUT_PIO to 'CONFIG_' namespace 
Also evaluate its value using IS_ACTIVE when possible.
 2020-05-14 15:56:59 +02:00
Leandro Lanzieri
908309f714
gnrc/rpl: Move GNRC_RPL_CLEANUP_TIME to 'CONFIG_' namespace 2020-05-14 15:56:58 +02:00
Leandro Lanzieri
33189b869e
gnrc/rpl: Move GNRC_RPL_DAO_DELAY_JITTER to 'CONFIG_' namespace 2020-05-14 15:56:58 +02:00
Leandro Lanzieri
3deab70a4c
gnrc/rpl: Move GNRC_RPL_DAO_DELAY_DEFAULT to 'CONFIG_' namespace 2020-05-14 15:56:57 +02:00
Leandro Lanzieri
c8fb88d2f0
gnrc/rpl: Move GNRC_RPL_DAO_DELAY_LONG to 'CONFIG_' namespace 2020-05-14 15:56:57 +02:00
Leandro Lanzieri
c162631aa3
gnrc/rpl: Move GNRC_RPL_DAO_ACK_DELAY to 'CONFIG_' 2020-05-14 15:56:57 +02:00
Leandro Lanzieri
df29a769ba
gnrc/rpl: Move GNRC_RPL_DAO_SEND_RETRIES to 'CONFIG_' namespace 2020-05-14 15:56:56 +02:00
Leandro Lanzieri
51939c3608
gnrc/rpl: Move GNRC_RPL_LIFETIME_UNIT to 'CONFIG_' namespace 2020-05-14 15:56:56 +02:00
Leandro Lanzieri
3b06b41fa9
gnrc/rpl: Move GNRC_RPL_DEFAULT_LIFETIME to 'CONFIG_' namespace 2020-05-14 15:56:56 +02:00
Leandro Lanzieri
c61b6bca38
gnrc/rpl: Move GNRC_RPL_DEFAULT_DIO_REDUNDANCY_CONSTANT to 'CONFIG_' 2020-05-14 15:56:55 +02:00
Leandro Lanzieri
f353ca8225
gnrc/rpl: Move GNRC_RPL_DEFAULT_DIO_INTERVAL_MIN to 'CONFIG_' namespace 2020-05-14 15:56:55 +02:00
Leandro Lanzieri
7216c21dbc
gnrc/rpl: Move GNRC_RPL_DEFAULT_DIO_INTERVAL_DOUBLINGS to 'CONFIG_' 2020-05-14 15:56:52 +02:00
Martine Lenders
a6fe69b0e8
Merge pull request #13740 from miri64/gnrc_ipv6_nib/fix/abr-add-pio-iface 
gnrc_ipv6_nib: only add prefix of same interface to ABR
 2020-05-12 15:43:45 +02:00
Martine S. Lenders
d66583b542
gnrc_sock: re-issue MSG_RECV event if there are still received messages 
... after `*_recv()` was called.

This prevents a client from needing to call `*_recv()` in a loop.
 2020-05-12 14:01:56 +02:00
Martine Lenders
4e6df34576
gnrc_ipv6_nib: only add prefix of same interface to ABR 
It doesn't make sense for an Authoritative Border Router to manage a
prefix that does not belong to the border router's downstream
interface.
 2020-05-12 13:06:20 +02:00
José Alamos
089e0a2b44
Merge pull request #14048 from jue89/fix/gnrc_lorawan_abp 
net/gnrc/netif/lorawan: fix ABP device activation
 2020-05-11 11:34:59 +02:00
Juergen Fitschen
1eb3b596c4 net/gnrc/netif/lorawan: fixed ABP device activation 2020-05-09 20:16:29 +02:00
Juergen Fitschen
255c76ff35 net/gnrc/netif/lorawan: fixed deprecated NETOPT_LINK_CONNECTED 2020-05-09 20:11:16 +02:00
Leandro Lanzieri
2d1d13d452
Merge pull request #14028 from miri64/gnrc_pktdump/fix/opt-deps 
gnrc_pktdump: fix dependencies
 2020-05-08 08:53:31 +02:00
Martine Lenders
18bd56d2d9
Merge pull request #13979 from benpicco/net/gnrc/netif/6lo-frag_size 
gnrc/netif: 6lo: use 16 bit for max_frag_size
 2020-05-06 12:43:02 +02:00
Kaspar Schleiser
8ffd34ddd0
Merge pull request #12776 from maribu/test_event_wait_timeout 
tests/event_wait_timeout: Fix for 8bit platforms
 2020-05-05 21:33:06 +02:00
Martine S. Lenders
a349748354
gnrc_pktdump: reorder switch-cases in accordance with enum order 2020-05-05 21:05:00 +02:00
Martine S. Lenders
d43384d238
gnrc_pktdump: remove some duplicate calls to od_hex_dump() 
`od_hex_dump()` is called if `hdr_len < pkt->size` to print the rest
after `hdr_len` of `pkt`. So if we just leave `hdr_len = 0` instead of
calling `od_hex_dump()` for every other NETTYPE, we achieve the same
effect.

As it is more effective (and already done in some cases) to re-set
`hdr_len` when the header was printed, we initialize `hdr_len` first
with 0 now.
 2020-05-05 21:05:00 +02:00
Martine S. Lenders
5414164119
gnrc_pktdump: use gnrc_nettype_% module where appropriate 2020-05-05 21:05:00 +02:00
Benjamin Valentin
18651eb399 gnrc_netif: Use full L2-PDU as IPv6 MTU 
If the L2-PDU is greater than IPV6_MIN_MTU, use that as the MTU instead.
 2020-04-29 12:49:36 +02:00
Francisco
80b300289d
Merge pull request #13912 from benpicco/at86rf215-mr-qpsk 
drivers/at86rf215: implement MR-O-QPSK
 2020-04-29 12:44:00 +02:00
Benjamin Valentin
504d02038d gnrc_netif: update PDU after changing PHY mode 2020-04-29 10:41:37 +02:00
Martine Lenders
633d0f486d
Merge pull request #13669 from bergzand/pr/netif/async_events 
gnrc_netif: Add support for internal event loop
 2020-04-28 13:03:39 +02:00
Martine S. Lenders
cb8a6c36b0
gnrc_ipv6_nib: 6ln: use interface-specific DR for address registration 
With multiple 6LoWPAN interfaces the router for the given interface
—the one the triggering RA came over—should be used to register the
address with.

Co-Authored-By: Benjamin Valentin <benpicco@googlemail.com>
 2020-04-25 01:20:55 +02:00
Martine S. Lenders
245c04f368
gnrc_ipv6_nib: internal: add capability to search DR by interface 
Co-Authored-By: Benjamin Valentin <benpicco@googlemail.com>
 2020-04-24 17:57:09 +02:00
Marian Buschsieweke
7b67e74bed
sys/net/gnrc: Use %lu to print times 2020-04-23 21:16:57 +02:00
Martine Lenders
55a7010a0a
Merge pull request #13157 from nmeum/pr/fuzzing_tcp_only 
Add AFL-based fuzzing setup for network modules
 2020-04-18 10:54:14 +02:00
Sören Tempel
ac9c1f4a69 gnrc_tcp: disable checksum checks during fuzzing 2020-04-17 17:11:15 +02:00
Martine Lenders
652276f00f
gnrc_netif: provide PID-based version for netif ID 2020-04-17 16:59:21 +02:00
Joakim Nohlgård
2013ac75f5
gnrc_netif: Add support for internal event loop 
Enabled by the gnrc_netif_events pseudo module. Using an internal event
loop within the gnrc_netif thread eliminates the risk of lost interrupts
and lets ISR events always be handled before any send/receive requests
from other threads are processed.
The events in the event loop is also a potential hook for MAC layers and
other link layer modules which may need to inject and process events
before any external IPC messages are handled.

Co-Authored-By: Koen Zandberg <koen@bergzand.net>
 2020-04-17 12:02:39 +02:00
Benjamin Valentin
f198d689be gnrc_dhcpv6_client: fix for SLIP link-layer 
In a point-to-point serial connection, we don't have L2 addresses.
Set the link type & packet length accordingly and we will get a
prefix from KEA.
 2020-04-07 22:08:57 +02:00
Sören Tempel
65c7bbf76d gnrc_sock: Implement termination condition for fuzzing 
The termination condition implemented in gnrc_pktbuf_malloc does not
work when using the sock interface as sock copies packet data to a local
buffer and frees the packet afterwards. As such, the fuzzing application
would exit before performing any input processing.

For this reason, the termination condition in gnrc_pktbuf_malloc is
disabled when using sock. Instead, the application terminates if
gnrc_sock_recv previously returned the fuzzing packet. The underlying
assumption of this implementation is that gnrc_sock_recv is called in a
loop.
 2020-04-07 17:48:39 +02:00
Sören Tempel
e0570181e4 gnrc_pktbuf_malloc: Terminate when fuzzing packet is freed 
Since RIOT is an operating system the native binary will never terminate
[0]. The termination condition for fuzzing GNRC is that the packet was
handled by the network stack and therefore freed. If it is never freed
we will deadlock meaning a memory leak was found, afl should be able to
detect this through timeouts.

This is currently only supported for gnrc_pktbuf_malloc since this is
the pktbuf implementation I used for fuzzing. Implementing this in
pktbuf.h is not possible.

[0]: Except NATIVE_AUTO_EXIT is defined, however, even with that define
set RIOT will only terminate when all threads terminated. Unfortunately,
gnrc_udp and other network threads will never terminate.
 2020-04-07 17:48:39 +02:00
Martine Lenders
76acde0984
Merge pull request #13779 from miri64/sock/enh/sock_buf_recv-iterate-chunks 
sock: amend API to iterate over stack-internal buffer chunks
 2020-04-01 16:59:03 +02:00
Martine S. Lenders
d934579817
gnrc_sock: adapt for *_recv_buf() API change 2020-04-01 15:50:51 +02:00
Leandro Lanzieri
461f40949d
gnrc/ipv6: Group IPv6 related Kconfig files 2020-04-01 14:34:13 +02:00
Leandro Lanzieri
4476e06814
gnrc/uhcpc: Fix lines lengths 2020-03-31 19:02:55 +02:00
Leandro Lanzieri
184bbd32e5
gnrc/netif: Fix lines lengths 2020-03-31 19:02:54 +02:00
Leandro Lanzieri
87ac1a652d
gnrc/nib: Expose configurations to Kconfig 2020-03-31 19:02:51 +02:00
Leandro Lanzieri
64dde8f317
gnrc/nib: Move GNRC_IPV6_NIB_ABR_NUMOF to 'CONFIG_' namespace 2020-03-31 18:07:13 +02:00
Leandro Lanzieri
a77d0dd9c5
gnrc/nib: Move GNRC_IPV6_NIB_OFFL_NUMOF to 'CONFIG_' namespace 2020-03-31 18:07:13 +02:00
Leandro Lanzieri
f6ee712e98
gnrc/nib: Move GNRC_IPV6_NIB_DEFAULT_ROUTER_NUMOF to 'CONFIG_' namespace 2020-03-31 18:07:12 +02:00
Leandro Lanzieri
f2ed8b06c0
gnrc/nib: Move GNRC_IPV6_NIB_L2ADDR_MAX_LEN to 'CONFIG_' namespace 2020-03-31 18:07:12 +02:00
Leandro Lanzieri
acd789bd87
gnrc/nib: Move GNRC_IPV6_NIB_CONF_REACH_TIME_RESET to 'CONFIG_' 2020-03-31 18:07:11 +02:00
Leandro Lanzieri
07771de08f
gnrc/nib: Move GNRC_IPV6_NIB_NUMOF to 'CONFIG_' namespace 2020-03-31 18:07:11 +02:00
Leandro Lanzieri
1f20ffc150
gnrc/nib: Move GNRC_IPV6_NIB_CONF_NO_RTR_SOL to 'CONFIG_' namespace 
Also evaluate using IS_ACTIVE macro.
 2020-03-31 18:07:10 +02:00
Leandro Lanzieri
53a522d642
gnrc/nib: Move GNRC_IPV6_NIB_CONF_MULTIHOP_P6C to 'CONFIG_' namespace 
Also evaluate using IS_ACTIVE macro.
 2020-03-31 18:07:10 +02:00
Leandro Lanzieri
22b4df9537
gnrc/nib: Move GNRC_IPV6_NIB_CONF_MULTIHOP_DAD to 'CONFIG_' namespace 
Also evaluate using IS_ACTIVE macro.
 2020-03-31 18:07:09 +02:00
Leandro Lanzieri
3ec296400d
gnrc/nib: Move GNRC_IPV6_NIB_CONF_DC to 'CONFIG_' namespace 
Also evaluate using IS_ACTIVE macro.
 2020-03-31 18:07:09 +02:00
Leandro Lanzieri
219d5a1de2
gnrc/nib: Move GNRC_IPV6_NIB_CONF_REDIRECT to 'CONFIG_' namspace 
Also evaluate using IS_ACTIVE macro.
 2020-03-31 18:07:08 +02:00
Leandro Lanzieri
bad9abd349
gnrc/nib: Move GNRC_IPV6_NIB_CONF_DNS to 'CONFIG_' namespace 
Also evaluate using IS_ACTIVE macro.
 2020-03-31 18:07:07 +02:00
Leandro Lanzieri
e52b93cef0
gnrc/nib: Move GNRC_IPV6_NIB_CONF_ARSM to 'CONFIG_' namespace 
Also evaluate it using IS_ACTIVE macro.
 2020-03-31 18:07:07 +02:00
Leandro Lanzieri
f23267b67b
gnrc/nib: Move GNRC_IPV6_NIB_CONF_QUEUE_PKT to 'CONFIG_' namespace 
Also evaluate it using IS_ACTIVE macro.
 2020-03-31 18:07:06 +02:00
Leandro Lanzieri
ce931f179c
gnrc/nib: Move GNRC_IPV6_NIB_CONF_SLAAC to 'CONFIG_' namespace 
Also evaluate it using IS_ACTIVE macro.
 2020-03-31 18:07:05 +02:00
Leandro Lanzieri
49ec28867c
gnrc/nib: Move GNRC_IPV6_NIB_CONF_ROUTER to 'CONFIG_' namespace 
Also evaluate it using IS_ACTIVE macro.
 2020-03-31 18:07:05 +02:00
Leandro Lanzieri
1acfe7ae19
gnrc/nib: Move GNRC_IPV6_NIB_CONF_6LN to 'CONFIG_' namespace 
Also evaluate it using IS_ACTIVE macro.
 2020-03-31 18:07:04 +02:00
Leandro Lanzieri
398bb6d025
gnrc/nib: Move GNRC_IPV6_NIB_CONF_6LR to 'CONFIG_' namespace 
Also evaluate it using IS_ACTIVE
 2020-03-31 18:07:03 +02:00
Leandro Lanzieri
40c78f1c75
gnrc/nib: Move GNRC_IPV6_NIB_CONF_6LBR to 'CONFIG_' namespace 
Also evaluate it using IS_ACTIVE macro.
 2020-03-31 18:07:03 +02:00
Benjamin Valentin
a3adaa7ec0 gnrc_ipv6_nib: fix index calculation 
We must divide the pointer difference (in bytes) by the size of
the individual elements to get the index of the element.
 2020-03-28 00:00:16 +01:00
Benjamin Valentin
a835ad3e13 gnrc_ipv6_nib: append ext_opts when adding sixco 2020-03-27 22:52:31 +01:00
benpicco
8024380f7b
Merge pull request #13700 from miri64/gnrc_sock/enh/recv_buf 
gnrc_sock: provide implementation for `sock_*_recv_buf()`
 2020-03-27 16:34:57 +01:00
benpicco
15dc9fe0de
Merge pull request #13731 from benpicco/upstream_no_rtr_adv 
gnrc_uhcp, gnrc_dhcpv6_client_6lbr: disable Router Advertisements on upstream interface
 2020-03-27 10:32:59 +01:00
Benjamin Valentin
3f24eaefb9 gnrc_uhcp: disable router advertisements on upstream interface 2020-03-27 00:37:54 +01:00
Benjamin Valentin
fec156899c gnrc_dhcpv6_client_6lbr: disable router advertisements on upstream interface 
We don't want to advertise ourselves as a router to the upstream router.
This also leads to the border router ignoring advertisements from the upstream
router.
 2020-03-27 00:37:54 +01:00
Martine Lenders
f39cfc7556
Merge pull request #13253 from nmeum/pr/random_ephemeral_port 
gnrc_sock_udp: choose random ephemeral port
 2020-03-26 15:00:14 +01:00
Martine Lenders
061eb88c05
Merge pull request #12994 from jia200x/pr/gnrc_netif_desc_alloc 
gnrc_netif: implementation of dynamic GNRC_NETIF_NUMOF approach
 2020-03-26 14:30:44 +01:00
Jose Alamos
44f7cb712c gnrc_netif: add GNRC_NETIF_SINGLE macro 2020-03-26 14:19:02 +01:00
Martine Lenders
cba1a2da0c
Merge pull request #13666 from jue89/feature/evtimer_now_msec 
net/gnrc/ipv6/nib: remove direct dependency to xtimer
 2020-03-26 13:50:13 +01:00
Jose Alamos
e451570219 gnrc_netif: remove GNRC_NETIF_NUMOF macro 2020-03-26 11:12:23 +01:00
Jose Alamos
67ed9defbe gnrc_netif_xxx_create: use external netif allocation 2020-03-26 11:12:23 +01:00
Martine Lenders
ab5deca3b0
Merge pull request #13712 from miri64/gnrc_uhcp/fix/prefix_len 
gnrc_uhcp: use actually advertised prefix length
 2020-03-25 18:46:00 +01:00
Martine S. Lenders
01d94f268a
gnrc_uhcp: use actually advertised prefix length 
This makes the UHCP client to use the actually advertised prefix length
instead of assuming /64.
 2020-03-25 16:55:01 +01:00
benpicco
6ae0fd7c82
Merge pull request #13485 from miri64/gnrc_dhcpv6/enh/configure-context 
gnrc_dhcpv6_client: configure prefix as compression context on 6LBRs
 2020-03-25 16:48:11 +01:00
benpicco
53790d1269
Merge pull request #13713 from miri64/gnrc_sixlowpan_iphc/bug/encode-zero-header 
gnrc_sixlowpan_iphc: zero IPv6 header before decompressing into it
 2020-03-25 16:43:17 +01:00
Martine S. Lenders
ac222521ab
gnrc_sixlowpan_iphc: zero IPv6 header before decompressing into it 2020-03-25 14:54:18 +01:00
Martine S. Lenders
4fc0251b4b
gnrc_ipv6_nib: only route to prefix list entry if on-link 
In 06aa65e1ba (#10627) a new behavior was
introduced in IPv6 route resolution to try address resolution only at
interfaces that have the prefix of the address to be resolved configured
in the prefix list. This however only makes sense, if the prefix
configured is [on-link], otherwise there is small likelihood of the
address to be resolved being on that link.

For the error case presented for 06aa65e (circular routing at the border
router) this made sense, however within a 6LoWPAN, due to the prefix
being valid for the entire mesh, this leads to the nodes always trying
classic address resolution for in-network addresses instead of just
routing to the default route.
Classic address resolution however fails, as 6LoWPAN hosts typically
[don't join the solicited-node multicast address of their unicast
addresses][6LN-iface-init], resulting in in-network addresses not being
reachable.

As such, to prevent both error cases

- the fallback to address resolution by prefix list must only be used
  when the prefix is on-link,
- the prefix configured by DHCPv6/UHCP at the 6LoWPAN border router
  must be configured as on-link, but
- the prefix must not be advertised as on-link within the 6LoWPAN to
  still be [in line with RFC 6775][RFC-6775-forbidden]

With this change these cases are covered.

[on-link]: https://tools.ietf.org/html/rfc4861#page-6
[RFC 6775]: https://tools.ietf.org/html/rfc6775
[6LN-iface-init]: https://tools.ietf.org/html/rfc6775#section-5.2
[RFC-6775-forbidden]: https://tools.ietf.org/html/rfc6775#section-6.1
 2020-03-25 13:13:40 +01:00
Martine Lenders
e47c8fa91c
Merge pull request #10627 from miri64/gnrc_ipv6_nib/fix/forward-to-pl 
gnrc_ipv6_nib: don't ignore PL for route
 2020-03-24 21:49:56 +01:00
Martine Lenders
06aa65e1ba
gnrc_ipv6_nib: don't ignore PL for route 
When pinging to a prefix for which there is a prefix list entry on the
node (so no next hop) but a default route, a packet to a non-existent
address under that prefix results in the packet being forwarded to the
default route instead. This fixes it, so the node tries address
resolution on the interface the prefix list entry is associated to.
 2020-03-24 18:19:18 +01:00
Martine S. Lenders
39cd293a0e
gnrc_sock: provide implementation for sock_*_recv_buf() 2020-03-24 17:15:17 +01:00
Juergen Fitschen
877e0a9b32 net/gnrc/ipv6/nib: fix typos 2020-03-24 13:07:20 +01:00
Juergen Fitschen
47f5cd8618 net/gnrc/ipv6/nib: make use of the evtimer system time getter 
This commit removes the implication that evtimer uses xtimer as timer backend.
 2020-03-24 13:07:20 +01:00
Francisco
cdbf0b2d69
Merge pull request #13583 from benpicco/at86rf215-minimal 
drivers/at86rf215: add basic support for AT86RF215 dual-band radio
 2020-03-20 09:33:50 +01:00
benpicco
5435792034
Merge pull request #12277 from benemorius/pr/kw41zrf 
drivers: add kw41zrf
 2020-03-20 00:49:56 +01:00
Joakim Nohlgård
5bd67d88a8 drivers/kw41zrf: Transceiver driver for the KW41Z radio 
This is the radio found in NXP Kinetis KW41Z, KW21Z. Only 802.15.4 mode
is implemented (KW41Z also supports BLE on the same transceiver).

The driver uses vendor supplied initialization code for the low level
XCVR hardware, these files were imported from KSDK 2.2.0 (framework_5.3.5)
 2020-03-19 17:00:04 -05:00
Benjamin Valentin
d35511bee7 drivers/at86rf215: Add basic driver for the AT86RF215 radio 
This adds a driver for the SPI based AT86RF215 transceiver.
The chip supports the IEEE Std 802.15.4-2015 and IEEE Std 802.15.4g-2012 standard.

This driver supports two versions of the chip:
    - AT86RF215:  dual sub-GHz & 2.4 GHz radio & baseband
    - AT86RF215M: sub-GHz radio & baseband only

Both radios support the following PHY modes:
    - MR-FSK
    - MR-OFDM
    - MR-O-QPKS
    - O-QPSK (legacy)

The driver currently only implements support for legacy O-QPSK.

To use both interfaces, add

    GNRC_NETIF_NUMOF := 2

to your Makefile.

The transceiver is able to send frames of up to 2047 bytes according to
IEEE 802.15.4g-2012 when operating in non-legacy mode.

Known issues:

 - [ ] dBm setting values are bogus
 - [ ] Channel spacing for sub-GHz MR-O-QPSK might be wrong
 - [ ] TX/RX stress test will lock up the driver on openmote-b
 2020-03-19 14:39:18 +01:00
Jose Alamos
4393822b0f gnrc_netif: add function to check if device requires 6Lo 2020-03-17 10:54:30 +01:00
Jose Alamos
6ace7b5472 gnrc_netif: use gnrc_netif_single where possible 2020-03-17 10:54:30 +01:00
Leandro Lanzieri
d281d4843f
Merge pull request #13628 from jia200x/pr/gnrc_rpl_macro 
gnrc_rpl: add default value to GNRC_RPL_DEFAULT_NETIF
 2020-03-13 15:47:13 +01:00
Jose Alamos
b553535cea gnrc_rpl_auto_init: replace preprocessor logic with if chain 2020-03-13 13:30:29 +01:00
Martine S. Lenders
4bdd138021
gnrc_sock: update implementation for async callback argument 2020-03-11 16:54:11 +01:00
Martine S. Lenders
612e782b3c
sock_async: supply optional callback argument with callback setter 2020-03-11 16:54:11 +01:00
Martine S. Lenders
6e6e435c65
sock_async: add optional callback argument 2020-03-11 16:54:11 +01:00
José Alamos
de4a1bf552
Merge pull request #13595 from gschorcht/gnrc/lorawan/fix_downlink_handling 
gnrc/lorawan: fixes the handling of downlink frames without payload
 2020-03-09 15:08:25 +01:00
Martine S. Lenders
c110337f6a
gnrc_dhcpv6_client: only configure 6Lo-ND features if interface is 6LN 2020-03-09 14:21:53 +01:00
Martine S. Lenders
06d1d79ffa
gnrc_dhcpv6_client: configure prefix as compression context on 6LBRs 2020-03-09 14:21:53 +01:00
Martine S. Lenders
079b9f717f
gnrc_dhcpv6_client: replace #if guards with if expressions 2020-03-09 14:21:52 +01:00
Gunar Schorcht
de38fc5e2e gnrc/lorawan: fix handling of downlink message without payload 2020-03-09 12:33:03 +01:00
Gunar Schorcht
32c78e3317 gnrc/lorawan: fix netopt_state_t size in link_layer 
`netopt_state_t` is an enumeration type which is not necessarily 1 byte. If `uint8_t` is used, the cast `*((const netopt_state_t*) val` in `sx127x_netdev::_set`tries to read the real size, which can be more than the given length of 1 byte. Therefore, `netstat_opt_t` has to be used instead of `uint8_t`
 2020-03-08 17:10:24 +01:00
Jose Alamos
6143cd800b gnrc_netif: use gnrc_netif_send where possible 2020-03-06 15:22:58 +01:00
Martine S. Lenders
f159b86b8a
gnrc_uhcpc: only configure 6Lo-ND features if wireless-interface is 6LN 
Otherwise the border router has no way to disseminate the context
throughout the network.
 2020-03-05 19:59:27 +01:00
Martine Lenders
c1a34ce860
Merge pull request #13560 from miri64/gnrc_uhcpc/fix/rm-before-adding 
gnrc_uhcpc: ensure compression context is managed by the ABR
 2020-03-05 17:12:45 +01:00
benpicco
7af046d740
Merge pull request #13548 from benpicco/sys/auto_init/netif-manual 
sys/auto_init: allow delayed initialisation of SAUL & gnrc_netif
 2020-03-05 17:05:02 +01:00
Martine S. Lenders
eacd0814d2
gnrc_uhcpc: remove wild comment 2020-03-05 15:51:52 +01:00
Martine S. Lenders
081499e280
gnrc_uhcpc: add compression context before ABR 
This way the context is added to the ABR's context list automatically.
 2020-03-05 15:51:52 +01:00
Martine S. Lenders
f626e5e7ef
gnrc_uhcpc: remove old prefix before adding new 2020-03-05 15:51:52 +01:00
Benjamin Valentin
4f7d5b105b sys/net/gnrc: Flag esp_now as 6LN 
In gnrc_netif_init_6ln() the flag GNRC_NETIF_FLAGS_6LN is accidentally not set
for esp_now devices. This commit fixes this.
 2020-03-05 15:18:43 +01:00
Benjamin Valentin
d765098d72 sys/auto_init: allow delayed initialisation of gnrc_netif 
Co-authored-by: Martine S. Lenders <m.lenders@fu-berlin.de>
 2020-03-04 16:13:40 +01:00
Martine S. Lenders
6c5d9e4f39
gnrc_uhcpc: fix NULL pointer dereference 2020-03-03 13:56:56 +01:00
benpicco
244c7da050
Merge pull request #13026 from brummer-simon/gnrc_tcp-prepare_for_sock_integration 
gnrc_tcp: Prepare for sock integration.
 2020-02-26 23:22:58 +01:00
Simon Brummer
10872d9a85 gnrc_tcp: Add Endpoints for connection specification 2020-02-26 21:24:06 +01:00
Martine S. Lenders
d99d0a0df0
gnrc_uhcpc: use LOG_INFO() for configuration information 2020-02-26 13:22:56 +01:00
Martine Lenders
8cc9c5ebe7
gnrc_uhcpc: update compression context with new prefix 
This updates (or adds) a compression context whenever a new prefix
arrives at the border router. This allows 6LoWPAN to compress said
prefix in the network.

Sadly, there is now way to just remove the context when the prefix is
overwritten, so I do not do it. If an administrator chooses to reset the
prefix they can use `6ctx del` which timeouts the prefix appropriately,
but IMHO it doesn't hurt to keep the old contexts.
 2020-02-26 13:22:56 +01:00
Sören Tempel
0e2a620788 gnrc_tftp: remove module 
Has been deprecated for awhile (01fc3d8f0b).
 2020-02-20 12:04:01 +01:00
benpicco
030e7ebc06
Merge pull request #13307 from miri64/dhcpv6-client-6lbr/feat/init 
gnrc_dhcpv6_client_6lbr: initial import of a 6LBR DHCPv6 client
 2020-02-20 11:00:35 +01:00
Martine S. Lenders
db463a3373
gnrc_dhcpv6_client_6lbr: initial import of a 6LBR DHCPv6 client 2020-02-19 17:37:47 +01:00
Sören Tempel
5cf433806e gnrc_sock_udp: fix null check in port generation function 
Still check if the port is unused if no socket has been given.
 2020-02-17 10:20:22 +01:00
Cenk Gündoğan
08c3dedf38 gnrc_rpl_p2p: use correct netif functions 2020-02-14 11:42:33 +01:00
Cenk Gündoğan
50423d60cf gnrc_rpl_p2p: use correct parameters for trickle_start() 2020-02-14 11:41:56 +01:00
Cenk Gündoğan
4b58e5d41b gnrc_rpl_p2p: fix cleanup timer usage 2020-02-14 11:41:30 +01:00
benpicco
5b608ef712
Merge pull request #12766 from miri64/gnrc_netapi/enh/report-error 
gnrc_netapi: report errors on dispatch
 2020-02-11 23:41:39 +01:00
Martine S. Lenders
a0740ee535 gnrc_netapi: report errors on dispatch 2020-02-11 18:16:02 +01:00
Martine Lenders
ebb20f2d44
Merge pull request #13305 from miri64/gnrc_ipv6_ext_frag_stats/feat/initial 
gnrc_ipv6_ext_frag: initial import of statistics module
 2020-02-10 20:23:13 +01:00
Martine S. Lenders
cf69e61289
gnrc_ipv6_ext_frag: initial import of statistics module 2020-02-06 13:48:42 +01:00
Martine S. Lenders
ed9f43ab3a
gnrc_sixlowpan_frag_stats: add average fragments per datagram statistic 2020-02-06 13:40:23 +01:00
Sören Tempel
b37bed8a1d gnrc_sock_udp: choose random ephemeral port 
Implements a random ephemeral port selection as per the second algorithm
from RFC 6056, see https://tools.ietf.org/html/rfc6056#section-3.3.2.
 2020-02-03 16:55:00 +01:00
Leandro Lanzieri
5e1ef498a7
Merge pull request #13245 from miri64/gnrc_sixlowpan_frag_rb/enh/doc-fix-kconfig 
gnrc_sixlowpan_frag_rb: fix doc on DO_NOT_OVERRIDE
 2020-02-03 13:54:37 +01:00
Martine Lenders
02c16479cf
Merge pull request #13244 from miri64/gnrc_ipv6_ext/enh/rbuf-do-not-override 
gnrc_ipv6_ext_frag: add configuration option to keep oldest entry
 2020-02-03 13:23:20 +01:00
Martine S. Lenders
90ed5bf4af
gnrc_sixlowpan_frag_rb: fix doc on DO_NOT_OVERRIDE 2020-02-03 12:48:19 +01:00
Martine S. Lenders
d99012561a
gnrc_ipv6_ext_frag: add configuration option to keep oldest entry 2020-02-03 12:44:15 +01:00
benpicco
c7b0483549
Merge pull request #12879 from miri64/gnrc_sixlowpan_iphc/feat/nhc-ext 
gnrc_sixlowpan_iphc: add support for IPv6 extension header compression
 2020-01-31 12:02:47 +01:00
Cenk Gündoğan
0cf8bf1665
Merge pull request #12958 from leandrolanzieri/pr/kconfig_migrate/gnrc/ipv6_ext_hdr 
Kconfig: Expose gnrc/ipv6/ext/frag configurations
 2020-01-30 19:15:08 +01:00
Martine S. Lenders
0b3f785dfe
gnrc_sixlowpan_iphc: add extension header decoding 2020-01-30 17:59:59 +01:00
Leandro Lanzieri
fe820d8d9d Kconfig: Expose gnrc/ipv6/ext/frag configurations 2020-01-30 17:42:42 +01:00
Leandro Lanzieri
5602bd55ed gnrc/ipv6/ext/frag: Move configurations to 'CONFIG_' namespace 
Macros that changed:
GNRC_IPV6_EXT_FRAG_SEND_SIZE -> CONFIG_GNRC_IPV6_EXT_FRAG_SEND_SIZE
GNRC_IPV6_EXT_FRAG_RBUF_SIZE -> CONFIG_GNRC_IPV6_EXT_FRAG_RBUF_SIZE
GNRC_IPV6_EXT_FRAG_LIMITS_POOL_SIZE -> CONFIG_GNRC_IPV6_EXT_FRAG_LIMITS_POOL_SIZE
GNRC_IPV6_EXT_FRAG_RBUF_TIMEOUT_US -> CONFIG_GNRC_IPV6_EXT_FRAG_RBUF_TIMEOUT_US
 2020-01-30 17:42:41 +01:00
Sebastian Meiling
a4c4c25b3b
Merge pull request #12866 from jia200x/pr/gnrc_lorawan_remove_netdev 
net/gnrc_lorawan: remove netdev layer from MAC
 2020-01-30 14:02:59 +01:00
Jose Alamos
cc2fd97194 net/gnrc_lorawan: remove netdev abstraction from MAC layer 2020-01-27 10:10:24 +01:00
Leandro Lanzieri
881f17a816
Merge pull request #13123 from PeterKietzmann/pr_kconf_6lo 
Kconfig: Expose gnrc/sixlowpan configurations
 2020-01-20 17:41:52 +01:00
Martine S. Lenders
28ef3b6b0b
gnrc_ipv6_ext_frag: remove fragment header when n-th fragment is first 
The reassembly buffer only needs (and stores) the headers *before* the
fragment header (called per-fragment headers in RFC 8200, section 4.5).
Currently, when a subsequent IPv6 fragment is received before the first
fragment the fragment header is however not removed. With this fix it
does.
 2020-01-17 18:54:37 +01:00
PeterKietzmann
55282a1b1d net/gnrc/sixlowpan/frag/vrb:Move timeout macro to 'CONFIG_' namespace 2020-01-17 18:09:19 +01:00
PeterKietzmann
cc6bee4986 net/gnrc/sixlowpan/frag/vrb:Move size macro to 'CONFIG_' namespace 2020-01-17 18:09:19 +01:00
PeterKietzmann
7d2c9ef418 net/gnrc/sixlowpan/nd:Move ND time macro to 'CONFIG_' namespace 2020-01-17 18:09:19 +01:00
PeterKietzmann
582779a7a0 net/gnrc/sixlowpan/frag/rb:Move del. timer macro to 'CONFIG_' namespace 2020-01-17 18:09:19 +01:00
PeterKietzmann
811facfa15 net/gnrc/sixlowpan/frag/rb:Move timeout macro to 'CONFIG_' namespace 2020-01-17 18:09:19 +01:00
PeterKietzmann
9389d5b90f net/gnrc/sixlowpan/frag/rb:Move size macro to 'CONFIG_' namespace 2020-01-17 18:09:19 +01:00
PeterKietzmann
89af238eec net/gnrc/sixlowpan/frag/fb:Move size macro to 'CONFIG_' namespace 2020-01-17 18:09:19 +01:00
PeterKietzmann
b5ea3122e7 net/gnrc/sixlowpan:Move queue size macro to 'CONFIG_' namespace 2020-01-17 18:09:19 +01:00
PeterKietzmann
de99b99b35 Kconfig: Expose gnrc/sixlowpan configurations 2020-01-17 18:09:14 +01:00
Sebastian Meiling
48fbd446fe
Merge pull request #8796 from miri64/dhcpv6c-pd/feat/initial 
dhcpv6: Initial implementation of a client (with IA_PD support)
 2020-01-16 13:32:51 +01:00
Martine Lenders
15c828cf92
gnrc_dhcpv6_client: provide GNRC-specific DHCPv6 parts 2020-01-16 12:36:10 +01:00
Alexandre Abadie
fc45c2cc83
Merge pull request #12848 from miri64/gnrc_sixlowpan_frag_rb/fix/interval-fixes 
gnrc_sixlowpan_frag_vrb: fix issues with interval marker inherited from base
 2020-01-15 20:57:49 +01:00
Martine S. Lenders
d9ecc0b9bb
gnrc_sixlowpan_frag_vrb: append intervals of given base if entry exists 
Otherwise the list in `base->ints` will get lost.
 2020-01-15 15:00:03 +01:00
Martine S. Lenders
3082710f65
gnrc_ipv6_nib: allow for configuration of static link-local addresses 
This feature was removed without replacment in 71a7dbf918, but it can
still be useful.

Co-Authored-By: smlng <s@mlng.net>
 2020-01-14 15:46:18 +01:00
Francisco
1d206bca24
Merge pull request #12409 from miri64/gnrc_netif/fix/highest-source-scope-wins 
gnrc_netif: highest source address scope wins selection
 2020-01-14 10:43:24 +01:00
Martine S. Lenders
018e3dd437
gnrc_netif: use scope directly from address for multicast 2020-01-14 09:54:18 +01:00
Martine S. Lenders
85737a0436
gnrc_netif: remove misleading comment 
The comment exists since the introduction of the [original
implementation], but its meaning is unclear and misleading, as the code
doesn't do anything with link-local.

[original implementation]: https://github.com/RIOT-OS/RIOT/pull/3561
 2020-01-14 09:54:18 +01:00
Martine S. Lenders
46fd632e91
gnrc_netif: highest source address scope wins selection 
Rule 2 of the source address algorithm outlined in [RFC6724] states the
possible source addresses must also be compared among each other:

>     Rule 2: Prefer appropriate scope.
>     If Scope(SA) < Scope(SB): If Scope(SA) < Scope(D), then prefer SB and
>     otherwise prefer SA.  Similarly, if Scope(SB) < Scope(SA): If
>     Scope(SB) < Scope(D), then prefer SA and otherwise prefer SB.

Our current implementation doesn't do that. It just checks if the scope
of a possible source is lesser than the scope of the destination
(which involves the second "If" in the rule).

This fix grants points according to the scope of an address. If the
scope matches, they get the highest points, ensuring that the selected
source will always be reachable from the destination.

[RFC6724]: https://tools.ietf.org/html/rfc6724
 2020-01-14 09:54:17 +01:00
PeterKietzmann
fb71ccc098 net/gnrc/netif:GNRC_NETIF_MIN_WAIT_AFTER_SEND_US to 'CONFIG_' namespace 2020-01-13 12:28:37 +01:00
PeterKietzmann
9e83d12bc0 net/gnrc/netif: Move GNRC_NETIF_IPV6_ADDRS_NUMOF to 'CONFIG_' namespace 2020-01-13 12:28:37 +01:00
PeterKietzmann
724d58b074 net/gnrc/netif: Move GNRC_NETIF_MSG_QUEUE_SIZE to 'CONFIG_' namespace 2020-01-13 12:28:37 +01:00
PeterKietzmann
b28a586702 net/gnrc/netif: Move GNRC_NETIF_DEFAULT_HL to 'CONFIG_' namespace 2020-01-13 12:28:37 +01:00
PeterKietzmann
c654d1fc8b Kconfig: Expose gnrc/netif configurations 2020-01-13 12:28:31 +01:00
PeterKietzmann
b2f0642825 Kconfig: Expose gnrc/ipv6/configurations 2020-01-10 12:23:35 +01:00
PeterKietzmann
3f0a19a9bc net/gnrc/ipv6: Move config macros to 'CONFIG_' namespace 2020-01-07 15:36:04 +01:00
Martine S. Lenders
37d99c11b0
gnrc_sock: use …/async/types.h instead of …/async.h 2020-01-07 10:13:01 +01:00
Francisco
dcc5299682
Merge pull request #10667 from miri64/gnrc_sixloenc/enh/6lo-config 
gnrc_netif: make 6LoENC dynamically configurable
 2020-01-06 13:19:24 +01:00
Leandro Lanzieri
b58b5792e9 Kconfig: Expose gnrc/lorawan configurations 2019-12-20 14:14:32 +01:00
Leandro Lanzieri
449da7602d gnrc/lorawan: Express timer drift in per mille instead of percentage 2019-12-20 14:12:43 +01:00
José Alamos
7d4082a6a3
Merge pull request #12922 from leandrolanzieri/pr/kconfig_migrate/gnrc/ipv6_blacklisting 
Kconfig: Expose gnrc/ipv6/blacklist configurations
 2019-12-20 11:32:46 +01:00
Martine S. Lenders
e1ae44b536
gnrc_sixlowpan_frag_stats: actualize pseudo-module 
Having the definitions sit in the `net/gnrc/sixlowpan/frag.h` header
does not make much sense, when using Selective Fragment Forwarding
(and the fragmentation buffer already includes a
`net/gnrc/sixlowpan/frag/stats.h` header), so they are moved to their
own header. Since with this change it makes more sense to have the
statistics stored in their own sub-module, the pseudo-module is also
actualized.
 2019-12-18 15:45:03 +01:00
Leandro Lanzieri
3383bae8fe Kconfig: Expose gnrc/ipv6/blacklist configurations 2019-12-11 10:51:04 +01:00
Leandro Lanzieri
56e61dac47 net/gnrc/ipv6_blacklist: Move config macros to 'CONFIG_' namespace 
Macros that changed:
GNRC_IPV6_BLACKLIST_SIZE -> CONFIG_GNRC_IPV6_BLACKLIST_SIZE
 2019-12-11 10:39:16 +01:00
Martine Lenders
d926810e0b
Merge pull request #12893 from leandrolanzieri/pr/kconfig_migrate/gnrc/ipv6_whitelisting 
Kconfig: Expose gnrc/ipv6/whitelist configurations
 2019-12-10 18:32:34 +01:00
Benjamin Valentin
00ff291f2e gnrc_lwmac: use uintptr_t to get value of pointer 
A pointer is not 32 bit on all platforms.
Since gnrc_lwmac only stores 16 bit in the pointer variable it is
still save to cast like this even on AVR, but cast to uintptr_t
instead of uint32_t.

fixes #12869
 2019-12-10 17:18:30 +01:00
Martine S. Lenders
3bf426e6fc
gnrc_sixlowpan_iphc: factor-out IPv6 header decoding into own function 2019-12-10 15:46:51 +01:00
Martine S. Lenders
8ce3c745c8
gnrc_sixlowpan_iphc: add extension header encoding 2019-12-10 15:31:56 +01:00
Martine S. Lenders
a0a334a491
gnrc_sixlowpan_iphc: factor-out IPv6 header encoding into own function 2019-12-10 15:29:06 +01:00
Martine Lenders
f38f974d86
Merge pull request #12629 from miri64/gnrc_sixlowpan_iphc/enh/vrb-creation 
gnrc_sixlowpan_iphc: add fragment forwarding stubs
 2019-12-10 14:58:01 +01:00
Martine S. Lenders
3273602f24
tests: provide test application for IPHC+VRB behavior 2019-12-10 13:59:41 +01:00
Martine Lenders
a689f51e9a
gnrc_sixlowpan_iphc: add rudimentary forwarding routine 2019-12-10 13:56:33 +01:00
Martine S. Lenders
e31394536b
gnrc_sixlowpan_iphc: factor encoding out of sending function 2019-12-10 13:56:05 +01:00
Martine S. Lenders
556d71a7da
gnrc_sixlowpan_iphc: create VRB entry from uncompressed header 
... when VRB is available
 2019-12-10 13:56:02 +01:00
José Alamos
2027efa9f4
Merge pull request #12894 from leandrolanzieri/pr/gnrc_doc_config_group 
net/gnrc: Group compile configuration Doxygen groups and add GNRC LoRaWAN
 2019-12-09 18:20:35 +01:00
Martine Lenders
7b13781cd2
Merge pull request #12625 from miri64/gnrc_sock/enh/async-support 
gnrc_sock: provide asynchronous event implementation
 2019-12-09 12:39:58 +01:00
Leandro Lanzieri
9a0a514fdd Kconfig: Expose gnrc/ipv6/whitelist configurations 2019-12-06 15:04:14 +01:00
Leandro Lanzieri
a626fec016 Kconfig: Add net/gnrc file and menu 2019-12-06 14:31:00 +01:00
Leandro Lanzieri
de2fbeb112 net/gnrc/ipv6_whitelist: Move config macros to 'CONFIG_' namespace 
Macros that changed:
GNRC_IPV6_WHITELIST_SIZE -> CONFIG_GNRC_IPV6_WHITELIST_SIZE
 2019-12-06 13:57:52 +01:00
Leandro Lanzieri
47981b96c1 sys/net/gnrc: Add GNRC configuration Doxygen group 2019-12-06 12:18:03 +01:00
Martine Lenders
159accff37 gnrc_ipv6: fix source check for loopback address 
When the destination address is the loopback address (`::1`) in GNRC
the selected network interface typically is `NULL`, as with GNRC no
loopback interface de facto exists. So the assertion when checking if
the source address is valid if `netif != NULL` fails on that check.
This change fixes that issue by checking if the destination address is
the loopback address, before checking the validity of the source
address.
 2019-12-05 23:38:53 +01:00
Jose Alamos
8999528390 net/gnrc_lorawan: add MIB for setting RX2 datarate 2019-12-03 14:48:29 +01:00
Jose Alamos
1e9bb7c175 net/gnrc_lorawan: add MIB for setting L2 address 2019-12-03 14:27:56 +01:00
Jose Alamos
99dbcecc3a net/gnrc_lorawan: remove netdev SAP interface 2019-12-03 14:08:35 +01:00
Martine Lenders
09c46e273d
Merge pull request #12845 from miri64/gnrc_sixlowpan_frag_rb/fix/rm-by-datagram-pkt-release 
gnrc_sixlowpan_frag_rb: fix memory-leak in _rm_by_datagram()
 2019-12-02 19:20:55 +01:00
benpicco
900c6994af
Merge pull request #12855 from miri64/gnrc_gomach/fix/i12853 
gnrc_gomac: don't use constant as argument for RTT callback
 2019-12-02 15:10:40 +01:00
Martine Lenders
e1f81f02fd gnrc_gomac: don't use constant as argument for RTT callback 
The RTT callback for a super-frame cycle uses the `arg` pointer to set
the message value that then is handed to the GoMacH thread. However,
in both instances the timer is scheduled the constant
`GNRC_GOMACH_EVENT_RTT_NEW_CYCLE` is provided. This means the argument
is not really necessary.
 2019-12-02 08:14:55 +01:00
Martine S. Lenders
0251d6585e
gnrc_sixlowpan_frag_rb: error when interval buffer is full 2019-11-29 18:00:54 +01:00
Martine S. Lenders
3fe1bf59a4
gnrc_sixlowpan_frag_rb: fix memory-leak in _rm_by_datagram() 
This fits with the semantics of this function which doesn't provide or
uses any state of the reassembly buffer provided by the user, but finds
the entry itself and then removes it. This gives the user no chance to
remove the packet in the reassembly buffer entry, so
`gnrc_sixlowpan_frag_rb_rm_by_datagram()` has to release the packet
(other than `gnrc_sixlowpan_frag_rb_remove()` where not releasing the
packet is desired as it might be handed up to an upper layer).
 2019-11-29 15:38:13 +01:00
Leandro Lanzieri
8aa66e94ea net/gnrc/netif: Remove 'if' prefix from interface names 2019-11-29 10:22:00 +01:00
MichelRottleuthner
bf676d4728
Merge pull request #11022 from jia200x/pr/gnrc_lorawan 
gnrc_lorawan: add support for GNRC based LoRaWAN stack
 2019-11-27 09:25:20 +01:00
Jose Alamos
43b7164796 gnrc_pktdump: add NETTYPE_LORAWAN 2019-11-26 21:52:06 +01:00