Hauke Petersen
fb184a3b2c
sys/auto_init: add init for asymcute
2018-07-05 15:44:16 +02:00
6e6716a1a6
Merge pull request #9317 from maribu/sht1x
...
drivers/sht11: Major refactoring
2018-06-27 10:10:39 +02:00
Marian Buschsieweke
de9b67bdc2
drivers/sht1x: Major refactoring
...
- Use RIOT's GPIO interface to access the sensor to increase portability
- Changed API to allow more than one sensor per board
- Added `sht1x_params.h` that specifies how the sensors is connected - each
board can overwrite default settings by #defining SHT1X_PARAM_CLK and
SHT1X_PARAM_DATA
- Changed arithmetic to use integer calculations only instead of floating point
arithmetic
- Added support for checking the CRC sum
- Allow optional skipping of the CRC check to speed up measuring
- Added support for advanced features like reducing the resolution and skipping
calibration to speed up measuring
- Allow specifying the supply voltage of sensor which heavily influences the
temperature result (and use that information to calculate the correct
temperature)
- Reset sensor on initialization to bring it in a well known state
- Support for the obscure heater feature. (Can be useful to check the
temperature sensor?)
- Updated old SHT11 shell commands to the new driver interface, thus allowing
more than one SHT10/11/15 sensor to be used
- Added new shell command to allow full configuration of all attached SHT1x
sensors
- Removed old command for setting the SHT11 temperature offset, as this feature
is implemented in the new configuration command
2018-06-27 08:58:00 +02:00
Marian Buschsieweke
d208c224b0
drivers: Renamed module sht11 to sht1x
...
The sensor family SHT10, SHT11 and SHT15 only differ in their accuracy (as in
calibration, not as in resolution). Thus, the same driver can be used for all.
The new driver name better reflects this fact.
2018-06-27 08:57:58 +02:00
Hyungsin
0c5c3d9b77
driver/pir: add pir-based occupancy sensing
2018-06-26 13:46:37 -07:00
47fc4b0749
sys/auto_init: fix doxygen grouping
2018-06-11 19:12:02 +02:00
7d013eb2b6
sys: fix doxygen grouping
2018-06-11 19:12:02 +02:00
Cenk Gündoğan
1fb4789e1b
auto_init: add ndn-riot
2018-05-24 10:58:26 +02:00
372aadd626
Merge pull request #8978 from Hyungsin/forupstream_fxos8700
...
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-14 08:45:58 +02:00
Hyungsin
beaf08bcb2
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-12 17:51:58 -07:00
f9c75d0df7
Merge pull request #8915 from ZetaR60/RIOT_ads101x
...
drivers/ads101x: support for ADCs
2018-05-03 08:31:03 +02:00
Matthew Blue
f5658cd89a
drivers/ads101x: auto_init support
2018-04-13 11:38:50 -04:00
Hauke Petersen
108284670c
net: added RD client for simplified registration
2018-04-09 10:37:10 +02:00
Hauke Petersen
f12d85d032
net/rdcli: added common rdcli module
2018-04-09 10:37:10 +02:00
Hauke Petersen
6efb06f108
sys/auto_init: added initialization for Skald
2018-04-06 11:18:53 +02:00
5c7cc50698
sys/auto_init/saul: add saul adaptation
2018-03-08 14:07:28 +01:00
Semjon Kerner
22c49e99b5
sys/auto_init/saul: provide saul adaption for bmx055
2018-02-19 14:28:16 +01:00
Gaëtan Harter
934b075f76
Merge pull request #7883 from Hyungsin/hamilton-pushbutton
...
pulse counter driver: initial SAUL-compatible implementation
2018-01-30 19:35:44 +01:00
Hauke Petersen
bb8ba486d8
sys/auto_init: add SAUL initialization for lis2dh12
2018-01-18 18:39:43 +01:00
Martine Lenders
81ef15287a
native: provide socket-based ZEP device
2018-01-18 09:15:37 +01:00
Hyungsin
149914000f
sys/auto_init: add SAUL auto init for pulse counter
2018-01-17 06:29:05 -08:00
7727871923
sys/auto_init/saul: provide saul adaption to lis3mdl
2017-12-14 18:18:34 +01:00
40f43671bf
sys/auto_init: enable sx127x auto init
2017-12-01 18:09:49 +01:00
Sebastian Meiling
4a828c63aa
Merge pull request #7955 from aabadie/pr/mpu9150_update
...
drivers/mpu9150: adapt to new parameters initialization scheme + provide saul adaption
2017-11-28 11:41:54 +01:00
8a6d04ce52
Merge pull request #7925 from RIOT-OS/gnrc_netif2_integration/master
...
gnrc_netif2: gnrc_ipv6_nib: full integration into GNRC
2017-11-27 21:12:14 +01:00
smlng
df2b65a1dd
driver, hts221: add SAUL adaption
2017-11-22 11:33:54 +01:00
Martine Lenders
71a7dbf918
gnrc: remove legacy network interface structures
2017-11-17 09:20:29 +01:00
Dylan Laduranty
67048eafa2
Merge pull request #6900 from OTAkeys/pr/init_rtc
...
periph/rtc: move init from auto_init to periph_init
2017-11-13 21:22:22 +01:00
Vincent Dupont
f2466fb8dc
periph/rtc: move init from auto_init to periph_init
2017-11-09 12:56:43 +01:00
ccf704bab8
sys: random: use luid to generate random seed
2017-11-08 17:18:26 +01:00
be9e8614ef
sys/auto_init/saul: provide saul adaption to mpu9150
2017-11-08 09:09:21 +01:00
Martine Lenders
861035f22d
gnrc: integrate gnrc_netif2
...
Not link-able, since NDP and NC are missing (intentionally)
2017-11-07 19:08:44 +01:00
Martine Lenders
b74ee8869b
slip: port to be used with netdev
2017-10-10 23:14:12 +02:00
Martine Lenders
6a7de28cd1
gnrc: integrate NIB for testing
2017-10-10 10:12:19 +02:00
88433cba2f
sys: random: make use of submodules in Makefile
2017-08-30 23:49:30 +02:00
smlng
ca0cc3956d
saul: add support for grove ledbar
2017-08-30 09:12:57 +02:00
smlng
addf64349c
saul: add mpl3115a2
2017-06-29 09:57:17 +02:00
067231936f
Merge pull request #5793 from OTAkeys/pr/can_stack
...
can: add a CAN stack for RIOT
2017-06-26 16:02:35 +02:00
Martine Lenders
9d3f9f2589
Merge pull request #6402 from OTAkeys/pr/adcxx1c
...
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 10:39:02 +02:00
Vincent Dupont
35056fd647
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 09:46:03 +02:00
Vincent Dupont
144a0700f5
can: add autoinit basic support
2017-06-19 15:35:26 +02:00
smlng
054c002960
saul: add support for tmp006
2017-06-14 20:45:01 +02:00
d7543ccf31
sys/auto_init: use new bmx280 implementation for bme280 and bmp280
2017-06-02 14:54:17 +02:00
José Ignacio Alamos
017280db13
pkg/openthread: add OpenThread core
2017-06-01 13:44:05 -04:00
smlng
17e78f7d81
driver, mag3110: add saul auto init
2017-04-13 21:14:44 +02:00
57c26631da
sys/auto_init: fix io1_xplained saul integration
2017-04-07 16:59:04 +02:00
Vincent Dupont
73d8149490
drivers: add lsm6dsl imu driver
2017-04-06 10:58:18 +02:00
dylad
2f801bbce9
drivers/adxl345: initial implementation + SAUL adaptation
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-03-20 22:52:21 +01:00
Martine Lenders
29842bb5e4
netdev2: rename to netdev and remove gnrc_netdev
...
With some minor hand-edits I used the following chain of commands:
```sh
git rm sys/include/net/gnrc/netdev.h
git grep --name-only -i netdev2 | \
xargs sed -i -e 's/^\(NETDEV\)2\(.*\)\( [("]\)/\1\2 \3/g' \
-e 's/\(netdev\)2\(.*\)\( \/\*\*<\)/\1\2 \3/I' \
-e 's/\(netdev\)2/\1/gI'
git add -p
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | xargs -I'{}' dirname '{}' | uniq | \
grep "netdev2" | while read dir; do
new_dir="$(echo "$dir" | sed "s/netdev2/netdev/g")"
git mv -f "$dir" "$new_dir"
done
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | while read file; do
new_file="$(echo "$file" | sed "s/netdev2/netdev/g")"
git mv -f "$file" "$new_file"
done
git commit --amend
git grep --name-only "\<drivers_netdev_netdev\>" | \
xargs sed -i "s/\<drivers_netdev_netdev\>/drivers_netdev_api/g"
git add -p
git commit --amend
```
2017-03-15 09:31:20 +01:00
Joakim Nohlgård
0371769e72
devfs: Dynamic file system for device nodes
2017-03-07 17:59:59 +01:00
