18620: core: add core_mutex_debug to aid debugging deadlocks r=maribu a=maribu
### Contribution description
Adding `USEMODULE += core_mutex_debug` to your `Makefile` results in
on log messages such as
[mutex] waiting for thread 1 (pc = 0x800024d)
being added whenever `mutex_lock()` blocks. This makes tracing down
deadlocks easier.
### Testing procedure
Run e.g.
```sh
USEMODULE=core_mutex_debug BOARD=nucleo-f767zi make -C tests/mutex_cancel flash test
```
which should provide output such as
```
Welcome to pyterm!
Type '/exit' to exit.
READY
s
[mutex] waiting for thread 1 (pc = 0x8000f35)
START
main(): This is RIOT! (Version: 2022.10-devel-841-g5cc02-core/mutex/debug)
Test Application for mutex_cancel / mutex_lock_cancelable
=========================================================
Test without cancellation: OK
Test early cancellation: OK
Verify no side effects on subsequent calls: [mutex] waiting for thread 1 (pc = 0x800024d)
OK
Test late cancellation: [mutex] waiting for thread 1 (pc = 0x0)
OK
TEST PASSED
```
```sh
$ arm-none-eabi-addr2line -a 0x800024d -e tests/mutex_cancel/bin/nucleo-f767zi/tests_mutex_cancel.elf
0x0800024d
/home/maribu/Repos/software/RIOT/tests/mutex_cancel/main.c:51
```
### Issues/PRs references
Depends on and includes https://github.com/RIOT-OS/RIOT/pull/18619
19296: nanocoap: allow to define CoAP resources as XFA r=maribu a=benpicco
19504: cpu/cc26xx_cc13xx: Fix bogus array-bound warning r=maribu a=maribu
### Contribution description
GCC 12 create a bogus array out of bounds warning as it assumes that because there is special handling for `uart == 0` and `uart == 1`, `uart` can indeed be `1`. There is an `assert(uart < UART_NUMOF)` above that would blow up prior to any out of bounds access.
In any case, optimizing out the special handling of `uart == 1` for when `UART_NUMOF == 1` likely improves the generated code and fixes the warning.
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:88:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
88 | ctx[uart].rx_cb = rx_cb;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:89:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
89 | ctx[uart].arg = arg;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
### Testing procedure
The actual change is a pretty obvious one-liner, so that code review and a green CI should be sufficient. If not, running any UART example app without regression should do.
### Issues/PRs references
None
19506: tools/openocd: Fix handling of OPENOCD_CMD_RESET_HALT r=maribu a=maribu
### Contribution description
The OPENOCD_CMD_RESET_HALT was not longer correctly passed to the script. This fixes the issue.
### Testing procedure
Flashing of e.g. the `cc2650-launchpad` with upstream OpenOCD should work again.
### Issues/PRs references
The change was added to https://github.com/RIOT-OS/RIOT/pull/19050 after testing the PR and before merging. I'm not sure if the fix never worked because of this, or if behavior of `target-export-variables` or GNU Make changed.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19365: bootloaders: fix bootloader button logic r=benpicco a=dylad
### Contribution description
In lastest master, the `BTN_BOOTLOADER_INVERTED` logic doesn't work as expected.
This PR fixes the underlying logic by replacing the `BTN_BOOTLOADER_INVERTED` macro definition by a runtime function.
In fact the current code:
```
#ifndef BTN_BOOTLOADER_INVERTED
#if (BTN0_MODE == GPIO_IN_PD)
#define BTN_BOOTLOADER_INVERTED false
#else
#define BTN_BOOTLOADER_INVERTED true
#endif
#endif
```
cannot work because both `BTN0_MODE` and `GPIO_IN_PD` are not known by the precompiler as they are enum values defined at cpu level.
Thus, replaces it by a runtime function in our bootloader applications.
I've also add `GPIO_OD_PU` along side `GPIO_IN_PU` and add a new define (which can be override at board level or app level) in case an external pullup is used.
### Testing procedure
Flash the riotboot_dfu bootloader:
`make BOARD=saml21-xpro -C bootloaders/riotboot_dfu flash`
Then, flash any test app:
`PROGRAMMER=dfu-util USEMODULE=usbus_dfu make BOARD=saml21-xpro -C tests/shell riotboot/flash-slot0`
With master, the application will not start.
With this PR, the application will start after flashing.
### Issues/PRs references
Fixes#19364
19366: nanocoap_sock: don't include token in empty ACK response r=benpicco a=benpicco
19367: cord: bump reference from draft to rfc r=benpicco a=bergzand
### Contribution description
The draft is an RFC, this bumps the "see also" in the docs to the rfc.
### Testing procedure
Check that the correct RFC is linked in the docs.
### Issues/PRs references
None
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
19331: pkg/tinydtls: Adjust defaults r=miri64 a=chrysn
### Contribution description
This adjusts two defaults in tinydtls:
* Default verbosity is set to warning. At the info level, this module produces way more output (several lines per new connection, and even per message) than is common in RIOT.
* If gcoap is used, the buffer size is adjusted to the gcoap buffer size plus overhead. Otherwise, CoAP-over-DTLS works fine until one happens to request larger resources.
### Testing procedure
* Run examples/gcoap_dtls
* Send a CoAP request from outside, eg. with `aiocoap-client 'coaps://[fe80::3c63:beff:fe85:ca96%tapbr0]/.well-known/core' --credentials testserver.json` (where testserver.json is `{"coaps://[fe80::3c63:beff:fe85:ca96%tapbr0]/*": {"dtls": {"psk": {"ascii": "secretPSK"}, "client-identity": {"ascii": "Client_identity"}}}}`).
Before, there are messages shown for every request; now there are none.
Modify `examples/gcoap/server.c` as follows:
```patch
diff --git a/examples/gcoap/server.c b/examples/gcoap/server.c
index bf2315cd01..28e1faac27 100644
--- a/examples/gcoap/server.c
+++ b/examples/gcoap/server.c
`@@` -68,7 +68,7 `@@` static const coap_resource_t _resources[] = {
};
static const char *_link_params[] = {
- ";ct=0;rt=\"count\";obs",
+ ";ct=0;rt=\"count\";obs;looooooooooooooooooooooong-attribute=\"loooooooooooooooooooooooooooooong\"",
NULL
};
```
The request passes; without this patch, it is stuck in retransmissions until "Network error: Retransmissions exceeded".
### Issues/PRs references
This contributes to making #19289 usable with a minimum level of security. (That module fills up the gcoap buffer to the brim). While the module handles the verbosity as well as it can (occasionally admitting that it lost bytes of output), the previous verbosity produces an infinite stream of stdout data. (But the default should be quiet immaterial of that particular PR).
Co-authored-by: chrysn <chrysn@fsfe.org>
19299: Add missing newline to output of telnet example r=benpicco a=Enoch247
### Contribution description
From the commit msg:
> The telnet example prints a line to the console, but it is not ended with a newline. When using pyterm, the last line is then never shown as it reads the console line by line and is waiting for the end of the line.
>
> This patch swaps use of `printf` for `puts` for the last line printed. This means the missing newline character gets added. This is also done to be consistent with the rest of the file, where puts is used whenever possible instead of printf.
### Testing procedure
1. `cd examples/telnet`
2. `make all flash term`
3. observe the final line "Local shell disabled" is printed, but would not have without this patch
### Issues/PRs references
- none known
19301: fib: document unused state r=benpicco a=benpicco
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
19294: sys/shell: don't include suit command by default r=benpicco a=benpicco
19295: gcoap: Finish the gcoap_get_resource_list_tl -> gcoap_get_resource_list renaming r=benpicco a=chrysn
### Contribution description
In #16688, an argument was added to the `gcoap_get_resource_list` function by creating a new function `gcoap_get_resource_list_tl` with a deprecation and roll-over plan.
This plan has not been acted on so far.
This PR shortens the original plan by just adding the argument to `gcoap_get_resource_list` and removing `gcoap_get_resource_list_tl` in a single go. The rationale for this deviation is that while it's a public API, its only two practical consumers are the (built-in) well-known/core implementation, and the (built-in) CoRE Resource Directory (cord) endpoint. Moreover, a further change to this API (switching over to `coap_block_slicer_t`) is expected to happen within this release cycle, which would take something like 4 total releases to get through otherwise, which is unrealistic for an API that there are no known external users of.
A second commit clean up ToDo items (in the changed function's documentation) that referred to a IETF draft that has long been abandoned by the CoRE WG.
### Testing procedure
Plain inspection and CI passing should suffice.
### AOB
There is a second analogous pair left over from #16688, `gcoap_req_send` / `gcoap_req_send_tl`. As that *is* expected to be used widely, I prefer not to mix these two concerns, and get the present one through without unnecessary hold-up.
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: chrysn <chrysn@fsfe.org>
This is an API change in the latter, which would typically now take an
extra argument GCOAP_SOCKET_TYPE_UNDEF.
Follow-Up-For: https://github.com/RIOT-OS/RIOT/pull/16688
19278: gnrc_dhcpv6_client_simple_pd: select upstream based on type/index r=benpicco a=benpicco
19290: sys/crypto: make AES_KEY struct private & rename it r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
19142: sock_dtls: move common code into sock_dtls_establish_session() r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
18472: drivers/mrf24j40: add support for IEEE 802.15.4 Radio HAL r=benpicco a=jia200x
19175: drivers/periph_common/flashpage: fix silent error r=benpicco a=Enoch247
### Contribution description
This patch removes a test that silently hides failed writes to NULL. Instead, assert is used to ensure that the address is not NULL.
### Testing procedure
I am not certain how to update the tests to catch asserts. If this is possible, I will add a test, if someone will point me to a good example to learn from.
### Issues/PRs references
- none
Co-authored-by: Jose Alamos <jose@alamos.cc>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
18477: gnrc_static: add static network configuration r=miri64 a=benpicco
19101: CI: update check-labels-action r=miri64 a=kaspar030
19155: Revert "sys/pm_layered: pm_(un)block add attribute optimize(3)" r=maribu a=Teufelchen1
Revert "sys/pm_layered: pm_(un)block add attribute optimize(3) -shortens hotpath"
This reverts commit 5447203921.
### Contribution description
Compiling `examples/gnrc_networking_mac` using `TOOLCHAIN=llvm` yields the following error:
```
RIOT/sys/pm_layered/pm.c:77:16: error: unknown attribute 'optimize' ignored [-Werror,-Wunknown-attributes]
__attribute__((optimize(3)))
```
As indicated, this is because the attribute `optimize` is GCC only and not present in LLVM.
Compare the manpages of [GCC](https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html) and [LLVM](https://clang.llvm.org/docs/AttributeReference.html).
### Testing procedure
Since this should only affect performance and not behavior, no special testing is needed. I am not aware of any tests in RIOT which could verify that assumption.
### Issues/PRs references
Introduced in #18846
There is another instance of this attribute being used in[ shell_lock.c](6fb340d654/sys/shell_lock/shell_lock.c (L80)). Since the usage is security related, I omit it from this PR.
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
Co-authored-by: Teufelchen1 <bennet.blischke@haw-hamburg.de>
