Ken Bannister
bcd3e311a4
Merge pull request #10248 from llueder/coap/data_ptr
...
net/nanocoap: make data pointer c++ compliant
2018-11-05 10:10:45 +00:00
Lasse Lueder
885544b4b0
net/nanocoap: remove convenience ptr in coap_hdr_t
...
Empty array uint8_t data[] is not allowed in ISO-C++. Replacement: function coap_hdr_data_ptr, which handles
the pointer arithmetic to point where hdr.data pointed
2018-11-02 16:34:57 +01:00
Lasse Lueder
34a6e384c2
net/gcoap: use coap_data_ptr instead of hdr.data
2018-11-02 16:33:29 +01:00
Lasse Lueder
18ae8ef90d
net/nanocoap: use coap_data_ptr instead of hdr.data
2018-11-02 16:33:29 +01:00
Lasse Lueder
2ddd8ce1a9
net/nanocoap: define coap_data_ptr
2018-11-02 16:33:29 +01:00
Kevin "Bear Puncher" Weiss
1d95da01fa
Merge pull request #9211 from Josar/pr/xtimer_target_overflow
...
xtimer: timer & target overflow, hang resolved.
2018-11-02 15:31:26 +01:00
José Alamos
6d8826e448
Merge pull request #10267 from maribu/autoinit_fix
...
sys/auto_init: Fixed initialization of sht1x
2018-11-02 10:55:52 +01:00
Josarn
672368954e
xtimer: timer & target overflow, hang resolved.
...
1. When the 32 bit target of the xtimer overflowed the timer was not placed in the right list.
2. When the hardware timer overflowed the comparison was wrong for setting next target.
3. Backoff condition
2018-11-01 16:48:20 +01:00
Lucas Jenß
6ed11de354
Merge pull request #10105 from x3ro/fix-shell-prompt-infinite-loop
...
Do not try to continue reading shell commands if input source is closed
2018-10-30 19:24:01 +01:00
Lucas Jenss
62cecc9496
Do not try to continue reading shell commands if input source is closed
...
In RIOT native, sending CTRL+D to a shell started using shell_run would resulted in and
endless prompt loop. I've been unable to trigger such a behaviour
on actual hardware using a UART connection, but calling `pm_off` seemed
like a better alternative than having an `#ifdef BOARD_NATIVE`.
Fixes #9946
2018-10-30 19:06:42 +01:00
Emmanuel Baccelli
365d82ed09
Merge pull request #9829 from OTAkeys/pr/uuid_string
...
uuid: add uuid_to_string() and uuid_from_string()
2018-10-30 14:30:47 +01:00
Martine Lenders
d07ac86ea1
Merge pull request #10274 from gebart/gnrc/netif-rawmode-rxinfo
...
gnrc_netif_ieee802154: Provide LQI, RSSI in raw mode via netif_hdr
2018-10-29 19:06:14 +01:00
Marian Buschsieweke
be6b705b38
sys/auto_init: Improved doc on sht1x auto init
...
The auto initialization of the sht1x module differs from the initialization of
other sensors, but previously no documentation pointed that out. This lack of
documentation led to a bug being introduced. This commit provides the previously
missing documentation.
2018-10-29 13:20:06 +01:00
Martine Lenders
99e3d780ea
gnrc_pktbuf: clarify doc of _start_write()
...
Resolves #10261
2018-10-28 17:28:24 +01:00
Joakim Nohlgård
52ac53b4d9
gnrc_netif_ieee802154: Provide LQI, RSSI in raw mode via netif_hdr
...
Useful in sniffer situations to see the signal strength of a received
packet. Also avoids the crash described in
https://github.com/RIOT-OS/applications/pull/54
2018-10-27 00:22:51 +02:00
Marian Buschsieweke
6e1c50a1e3
sys/auto_init: Fixed initialization of sht1x
...
- the driver for sht1x is initialized two times
- the second initialization is done only when SAUL is used, but sht1x needs
to be initialized in any case. (SAUL registration is also done there, but
only when SAUL is actually being used.)
This commit fixes both.
2018-10-26 13:08:37 +02:00
Martine Lenders
effd0c85a4
Merge pull request #10263 from gebart/sys/ps-rm-xtimer
...
sys/ps: Remove unused include xtimer.h
2018-10-26 10:24:59 +02:00
Joakim Nohlgård
1f58c63ea4
sys/ps: Remove unused include xtimer.h
2018-10-26 09:03:46 +02:00
Martine Lenders
a5c9f959b5
gnrc_ipv6: use gnrc_pktbuf_reverse_snips()
2018-10-25 23:11:33 +02:00
Martine Lenders
ac54a2d2b2
gnrc_pktbuf: add gnrc_pktbuf_reverse_snips() helper function
...
This allows for
a) testing the packet reversal properly in unittests
b) use it in other places than `gnrc_ipv6`'s receive function
2018-10-25 23:11:33 +02:00
Martine Lenders
959e4491fa
Merge pull request #9702 from maribu/phydat_fit
...
sys/phydat: New phydat_fit API
2018-10-25 19:16:54 +02:00
Martine Lenders
466bc341a6
Merge pull request #10231 from miri64/gnrc_ipv6_ext/enh/move-rh-to-gnrc
...
gnrc_ipv6_ext: move ipv6_ext_rh (partly) to GNRC
2018-10-25 19:15:22 +02:00
danpetry
99ae495226
Merge pull request #10011 from leandrolanzieri/pr/drivers/ds18
...
drivers/ds18: Add Maxim Integrated 1-Wire temperature sensor driver
2018-10-25 17:26:10 +02:00
Gaëtan Harter
c5deac4865
Merge pull request #10023 from miri64/gnrc_netif/fix/no-addr-but-addr-len
...
gnrc_netif: Fix l2addr_len > 0, but no l2addr edge-case
2018-10-25 14:31:32 +02:00
Martine Lenders
ad183dbf7e
ipv6_ext: remove empty, unused module
2018-10-25 11:12:14 +02:00
Martine Lenders
6a9adf2b59
gnrc_ipv6_ext: remove unnecessary return-value indirection
...
Those return values are internal anyway, and they have the same intent
as the one provided by `gnrc_ipv6_ext_rh`.
2018-10-25 11:12:14 +02:00
Martine Lenders
84a62da102
gnrc_ipv6_ext_rh: rename GNRC_IPV6_EXT_RH_OK for clarity
2018-10-25 11:11:50 +02:00
Martine Lenders
c54ba49e82
gnrc_ipv6_ext: move ipv6_ext_rh (partly) to GNRC
2018-10-25 11:10:25 +02:00
Frits Kuipers
8b8790c18f
drivers/ds18: Add Maxim Integrated ds18 driver
...
tests/driver_ds18: Add test application for DS18B20 sensor.
tests/driver_ds18: Add whitelist of boards
2018-10-24 16:02:05 +02:00
Marian Buschsieweke
fe46cae00d
sys/phydat: New phydat_fit API
...
The current phydat_fit implementation the following limitations:
- The API is way more complicated to use than needed
- It doesn't perform any rounding
- It uses `long` in a place where actual width (or better range) of the type
is pretty important.
This commit addresses these limitations and uses lookup-tables to reduce the
number of divisions required.
Before this commit code using it looked like this:
``` C
long values[] = { 100000, 2000000, 30000000 };
phydat_t dat = { .scale = 42, .unit = UNIT_V };
phydat_fit(&dat, values[0], 0, phydat_fit(&dat, values[1], 1, phydat_fit(&dat, values[2], 2, 0)));
```
Now it can be used like this:
``` C
int32_t values[] = { 100000, 2000000, 30000000 };
phydat_t dat = { .unit = UNIT_V, .scale = 42 };
phydat_fit(&dat, values, 3);
```
2018-10-24 13:05:51 +02:00
Juan I Carrano
12729d62a5
Merge pull request #10053 from OTAkeys/feat/base64_const
...
sys/base64: api change (const + void*)
2018-10-23 17:53:58 +02:00
Juan I Carrano
8148790e92
Merge pull request #10218 from bergzand/pr/crypt/helper_equal_const
...
crypto/helper: Change equals arguments to const
2018-10-23 17:51:56 +02:00
danpetry
bed1e22e7d
sys/auto_init: Changes to support SAUL
...
SAUL read functionality implemented only, as described in
tsl4531x_saul.c.
This driver will work with SAUL in both low and high power modes,
with the startup mode configurable in tsl4531x_params.h.
2018-10-23 17:26:28 +02:00
ed23bdf25a
crypto/helper: Change equals arguments to const
2018-10-21 20:27:33 +02:00
aedc5260d8
Merge pull request #9848 from ZetaR60/RIOT_eepreg2
...
sys/eepreg: EEPROM registration support (version 2)
2018-10-21 11:20:53 +02:00
Matthew Blue
ba4de322f4
sys/eepreg: Makefile support
2018-10-20 09:30:41 -04:00
Matthew Blue
d5e9994d1d
sys/eepreg: initial EEPROM registration support
2018-10-20 09:30:40 -04:00
f48deb48d4
net/nanocoap: rename variable name 'class'
...
'class' is keyword in c++ and leads to conflicts
2018-10-19 10:27:06 +02:00
Martine Lenders
bdf820af46
Merge pull request #10194 from bergzand/pr/cord/enable_stacktest
...
CORD: enable THREAD_CREATE_STACKTEST for threads
2018-10-18 14:38:29 +02:00
José Alamos
372a729e21
Merge pull request #10070 from OTAkeys/pr/bump_littlefs_version
...
pkg/littlefs: bump version to v1.6.2
2018-10-18 14:35:55 +02:00
afb7d6e1fc
cord/epsim: enable THREAD_CREATE_STACKTEST for thread
2018-10-18 14:17:07 +02:00
be1dc15655
cord/ep: enable THREAD_CREATE_STACKTEST for thread
2018-10-18 14:09:32 +02:00
PeterKietzmann
d3e34b4334
sys/ecc: add repetition code
2018-10-18 13:37:21 +02:00
Martine Lenders
179f17ca42
Merge pull request #9989 from PeterKietzmann/pr_add_golay
...
sys/ecc: add golay(24,12) half rate code
2018-10-18 09:31:17 +02:00
PeterKietzmann
9768995a0b
sys/ecc: add golay(24,12) ECC
2018-10-18 09:05:28 +02:00
Hauke Petersen
cfe4370a95
sys/shell/rdcli: rename to sc_cord_ep.c
2018-10-17 15:21:49 +02:00
Hauke Petersen
18cc7ee3ed
net/rdcli: rename to cord_ep
2018-10-17 15:21:49 +02:00
Hauke Petersen
226b9fa383
net/rdcli_simple: rename to cord_epsim
2018-10-17 15:21:49 +02:00
Hauke Petersen
152623577e
net/rdcli_config: rename to cord_config
2018-10-17 09:29:19 +02:00
Hauke Petersen
787524400c
net/rdcli_common: rename to cord_common
2018-10-17 09:29:19 +02:00
