This commit adds support for URBs (USB Request/Response Blocks). These
allow for submitting multi-transfer sized buffers with USBUS handling
the individual usbdev xmits. Multiple URBs can be queued at once for a
single endpoint and USBUS will handle them in the order of submission.
OUT endpoint URBs must always consist of a whole number of full-sized
transfers (N x MaxEndpointSize). They will automatically finish after
the endpoint received a transfer less than the endpoint size.
IN endpoints can be arbitrary-sized and do not have to consist of a
whole number of full-sized transmissions. They support a flag to
indicate that the last transfer in the sequence must be less than a full
sized transfer (USBUS_URB_FLAG_AUTO_ZLP) and this adds a zero length
transfer at the end of the transmissions if the last transfer was equal
to the maximum transfer size.
URBs can be cancelled, but if the URB is already being processed it will
be cancelled after the current transmission within the URB is finished.
If it is still in the queue it will immediately be removed from the
queue.
The board reset function `usb_board_reset_coding_cb` can be used on any CDC ACM interface. It is not necessary that the highlevel STDIO is used. Therefore, the call of the board reset function `usb_board_reset_coding_cb` has been moved from the USBUS STDIO CDC ACM implementation to USBUS CDC ACM implementation and is thus a feature of the USBUS CDC ACM interface that don't require any other functionality.
STM32F2/4/7 MCUs use sectors instead of pages, where the minimum sector size is defined by FLASHPAGE_MIN_SECTOR_SIZE, which is 16KB or 32KB (the first sector) depending on the CPU_MODEL. In this case SLOT0_OFFSET must be a multiple of the minimum sector size to cover a whole sector.
This adds a check to the usbus control stack to ensure that the amount
of data received with a setup request does not exceed the amount
indicated within the setup request
This adds a sanity check to the line coding request of the CDC ACM code
to chcek the length parameter in the setup request with the size of the
expected payload struct
This truncates the incomming frames to ETHERNET_FRAME_LEN and silently
discards the rest of the frame until the end of the frame. This should
be modified to an endpoint halt condition after #17090 is merged, but
for now this should be good enough.
Stalling the endpoint with the current stall implementation could cause
a ping of death scenario, so for now the data is truncated until the
above solution can be implemented.
The SetLineCoding request is optional to support (CDC PSTN subclass). No
need to claim to support it to the host and actually discard the data if
it is not supported by the implementation.
This adds compile-time options to configure the serial of an USB
peripheral. The serial be autogenerated with a configured number of
bytes. It is also possible to configure a fixed serial string for a
device and disable the autogeneration of the serial.
