19037: sys/usb, pkg/tinyusb: move USB board reset from highlevel STDIO to CDC ACM r=dylad a=gschorcht
### Contribution description
The USB board reset function `usb_board_reset_coding_cb` can be used on any CDC-ACM interface, even if the CDC ACM interface is not used as high-level STDIO. Therefore, this PR provides the following changes:
- The call of the board reset function `usb_board_reset_coding_cb` from USBUS stack has been moved from the STDIO CDC ACM implementation to the CDC ACM implementation and is thus a feature of any USBUS CDC ACM interface which does not necessarily have to be used as highlevel STDIO.
- The call of the board reset function `usb_board_reset_coding_cb` from tinyUSB stack been moved from module `tinyusb_stdio_cdc_acm` to module `tinyusb_contrib` and is compiled in if the `tinyusb_class_cdc` module is used together the `tinyusb_device` module. Thus, it is now a feature of the tinyUSB CDC ACM interface, which does not necessarily have to be used as highlevel STDIO.
- The `usb_board_reset` module defines the `usb_board_reset_in_bootloader` function as a weak symbol to be used when reset in bootloader if no real implementation of this function is compiled in and the `riotboot_reset` module is not used. It only prints an error message that the reset in bootloader is not supported. This is necessary if the module `usb_board_reset` is used to be able to restart the board with an application via a USB CDC ACM interface, but the board's bootloader does not support the reset in bootloader feature.
- A test application has been added that either uses the highlevel STDIO `stdio_acm_cdc` or creates a CDC-ACM interface to enable board resets via USB. If the `usbus_dfu` module is used, it also initializes the DFU interface to be able to work together with the `riotboot_dfu` bootloader.
### Testing procedure
1. Use a board with a bootloader that supports the reset in bootloader via USB, but don't use the highlevel STDIO to check that it works with `usbus_cdc_acm`, for example:
```python
USEMODULE=stdio_uart BOARD=arduino-mkr1000 make -C tests/usb_board_reset flash
```
After reset in application with command
```python
stty -F /dev/ttyACM0 raw ispeed 600 ospeed 600 cs8 -cstopb ignpar eol 255 eof 255
```
command `dmesg` should give an output like the following with RIOT's test VID/PID:
```python
dmesg
[1745182.057403] usb 1-4.1.2: new full-speed USB device number 69 using xhci_hcd
[1745182.160386] usb 1-4.1.2: New USB device found, idVendor=1209, idProduct=7d01, bcdDevice= 1.00
[1745182.160390] usb 1-4.1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[1745182.160392] usb 1-4.1.2: Product: arduino-mkr1000
[1745182.160393] usb 1-4.1.2: Manufacturer: RIOT-os.org
[1745182.160395] usb 1-4.1.2: SerialNumber: 6B6C2CA5229020D8
[1745182.170982] cdc_acm 1-4.1.2:1.0: ttyACM0: USB ACM device
```
After reset in bootloader with command
```python
stty -F /dev/ttyACM0 raw ispeed 1200 ospeed 1200 cs8 -cstopb ignpar eol 255 eof 255
```
command `dmesg` should give an output like the following with vendor VID/PID:
```python
[1746220.443792] usb 1-4.1.2: new full-speed USB device number 70 using xhci_hcd
[1746220.544705] usb 1-4.1.2: New USB device found, idVendor=2341, idProduct=024e, bcdDevice= 2.00
[1746220.544708] usb 1-4.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[1746220.553471] cdc_acm 1-4.1.2:1.0: ttyACM0: USB ACM device
```
2. Test the same as in 1., but this time use the highlevel STDIO to check that there is no regression and it still works with `stdio_cdc_acm`, for example:
```python
BOARD=arduino-mkr1000 make -C tests/usb_board_reset flash
```
3. Use a board that supports `riotboot_dfu` but doesn't use the highlevel STDIO and flash the `riotboot_dfu` bootloader, for example:
```python
BOARD=stm32f429i-disc1 make -C bootloaders/riotboot_dfu flash term
```
Once the bootloader is flashed, command `dfu-util --list` should give something like the following:
```python
Found DFU: [1209:7d02] ver=0100, devnum=14, cfg=1, intf=0, path="1-2", alt=1, name="RIOT-OS Slot 1", serial="6591620BCB270283"
Found DFU: [1209:7d02] ver=0100, devnum=14, cfg=1, intf=0, path="1-2", alt=0, name="RIOT-OS Slot 0", serial="6591620BCB270283"
```
If the output gives only
```python
Found Runtime: [1209:7d00] ver=0100, devnum=123, cfg=1, intf=0, path="1-2", alt=0, name="RIOT-OS bootloader", serial="6591620BCB270283"
```
an application is already running in DFU Runtime mode. Use `dfu-util -e` to restart it in bootloader DFU mode.
Then flash the test application, for example:
```python
FEATURES_REQUIRED=riotboot USEMODULE='usbus_dfu riotboot_reset' \
BOARD=stm32f429i-disc1 make -C tests/usbus_board_reset PROGRAMMER=dfu-util riotboot/flash-slot0
```
Once the test application is flashed, command `dfu-util --list` should give:
```python
Found Runtime: [1209:7d00] ver=0100, devnum=123, cfg=1, intf=0, path="1-2", alt=0, name="RIOT-OS bootloader", serial="6591620BCB270283"
```
Now, use command
```python
stty -F /dev/ttyACM1 raw ispeed 600 ospeed 600 cs8 -cstopb ignpar eol 255 eof 255
```
to restart the board in application. Command `dfu-util --list` should give again the following:
```python
Found Runtime: [1209:7d00] ver=0100, devnum=123, cfg=1, intf=0, path="1-2", alt=0, name="RIOT-OS bootloader", serial="6591620BCB270283"
```
That is, the application is running in DFU Runtime mode. Then use command
```python
stty -F /dev/ttyACM1 raw ispeed 1200 ospeed 1200 cs8 -cstopb ignpar eol 255 eof 255
```
to restart the board in bootloader DFU mode. Command `dfu-util --list` should now give the following:
```python
Found DFU: [1209:7d02] ver=0100, devnum=50, cfg=1, intf=0, path="1-2", alt=1, name="RIOT-OS Slot 1", serial="7D156425A950A8EB"
Found DFU: [1209:7d02] ver=0100, devnum=50, cfg=1, intf=0, path="1-2", alt=0, name="RIOT-OS Slot 0", serial="7D156425A950A8EB"
```
That is, the bootloader is in DFU mode and another application can be flash.
4. After a hard reset of the board under 3., try the commands `reboot` and `bootloader`.
5. To check the same for tinyUSB, use the existing tinyUSB application with a CDC ACM interface and add module `usb_board_reset`, for example:
```python
USEMODULE=usb_board_reset BOARD=stm32f429i-disc1 make -C tests/pkg_tinyusb_cdc_msc flash term
```
After flashing, it should be possible to restart the application with command:
```python
stty -F /dev/ttyACM1 raw ispeed 600 ospeed 600 cs8 -cstopb ignpar eol 255 eof 255
```
When using command
```python
stty -F /dev/ttyACM1 raw ispeed 1200 ospeed 1200 cs8 -cstopb ignpar eol 255 eof 255
```
the following error message should be shown in terminal
```python
[cdc-acm] reset in bootloader is not supported
```
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
The board reset function can be used on any CDC ACM interface. It is not necessary that the tinyUSB CDC ACM STDIO is used. Therefore, the board reset function is now a feature of the CDC ACM interface that don't require any other functionality.
Definition of a function as weak symbol for reset in bootloader which prints an error message if no real implementation is compiled in and
the module `riotboot_reset` is not used. This is required if the module `usb_board_reset` is used to restart the board with an application via an USB CDC ACM interface, but the board's bootloader does not support a reset in the bootloader.
The board reset function `usb_board_reset_coding_cb` can be used on any CDC ACM interface. It is not necessary that the highlevel STDIO is used. Therefore, the call of the board reset function `usb_board_reset_coding_cb` has been moved from the USBUS STDIO CDC ACM implementation to USBUS CDC ACM implementation and is thus a feature of the USBUS CDC ACM interface that don't require any other functionality.
In `dac_util_map(...)` the expression `((value - min) * UINT16_MAX)` was
cast to a 16 bit unsigned, then divided by `(max - min)`. This means
that anytime `(value - min) != 0` the numerator was truncated prior to
being divided and then returned.
This patch modifies the expression so that the downcast to 16 bits is
performed as the last operation.
STM32F2/4/7 MCUs use sectors instead of pages, where the minimum sector size is defined by FLASHPAGE_MIN_SECTOR_SIZE, which is 16KB or 32KB (the first sector) depending on the CPU_MODEL. In this case SLOT0_OFFSET must be a multiple of the minimum sector size to cover a whole sector.
The start/stop overhead that might by introduced by ztimer_acquire() and ztimer_release() called during ztimer_set() resp. ztimer_handler() should not be mesured here. It has its own adjustment field.
Furthermore, the overhead mesaurement uses ztimer_now(). It is allowed to called it only after the clock has been acquired.
