Kees Bakker
8644b5f7a0
cpu/samd21: introduce sam0.h so that we can select samr21.h or other
...
In the Makefile.include of the board it is required to set the correct
define.
Currently only SAMRG18A is supported, as required by samr21-xpro.
2016-09-21 19:43:30 +02:00
Kees Bakker
88e84f68ff
cpu/sam21_common: update ASF CMSIS (samr21) include files using ASF 3.21
...
Notice that RIOT was using FDPLL96M, which is indeed the name in the
datasheet. But Atmel is using GCLK_GENCTRL_SRC_FDPLL.
2016-09-21 19:43:30 +02:00
Kees Bakker
2869d7729d
cpu/samr21: rename ASF include files to prepare for ASF update
2016-09-21 19:43:30 +02:00
Martine Lenders
03a82bc295
Merge pull request #5857 from smlng/pr/tests/driver_at86rf2xx/fix
...
tests/driver_at86rf2xx: corrects flag compare
2016-09-21 18:01:36 +02:00
smlng
671831d326
corrects flag compare
2016-09-21 16:51:12 +02:00
smlng
0784b9a812
gnrc_rpl: add explanatory links to RFC sections
2016-09-21 13:45:25 +02:00
smlng
4ae107626a
gnrc_rpl: correct (some) default params
2016-09-21 13:34:36 +02:00
smlng
fbafcc39ac
gnrc_rpl: modify RPL default parameters in Makefile
2016-09-21 13:33:55 +02:00
Sebastian Meiling
8234a0029d
Merge pull request #5853 from cgundogan/pr/vagrant
...
vagrant: minimize Vagrantfile and make it loadable
2016-09-21 10:40:50 +02:00
Cenk Gündoğan
9457703607
vagrant: minimize Vagrantfile and make it loadable
...
By parameterizing certain paths with `RIOTBASE`, it is possible to load
this Vagrantfile from other Vagrantfiles. This feature will be used by the
Tutorials repository, so that this Vagrantfile has no knowledge about
the tutorials, hence the deletion of the `tutorials` definition at this
place.
2016-09-21 10:22:35 +02:00
Martine Lenders
4fa36e6128
auto_init_gnrc_netif: set priorities one lower than 6LoWPAN
2016-09-20 15:43:11 +02:00
Joakim Nohlgård
6be334b4f4
Merge pull request #5833 from immesys/fix-i2c-checks
...
samd21: i2c: check all busstate bits
2016-09-20 10:06:40 +02:00
Michael Andersen
e367ab93f6
samd21: i2c: improve busstate comparison
2016-09-19 10:54:17 -07:00
Joakim Nohlgård
0a15d1b2ed
Merge pull request #5838 from gebart/pr/nucleo-f207-mcu-group
...
boards/nucleo-f207: Use cortex_m3_2 MCU_GROUP
2016-09-19 12:55:29 +02:00
Joakim Nohlgård
d9d0646545
Merge pull request #5850 from smlng/pr/dist_fix_readme
...
minor typos in README corrected
2016-09-19 12:54:54 +02:00
smlng
f9432cef4b
minor typos in README corrected
2016-09-19 12:09:46 +02:00
Sebastian Meiling
0d901c410f
Merge pull request #5846 from cgundogan/pr/vagrantfile_tutorial
...
vagrant: sync Tutorials folder into vbox
2016-09-16 18:10:20 +02:00
Sebastian Meiling
77f8aabec1
Merge pull request #5847 from cgundogan/pr/vagrant_file_provisioner
...
vagrant: prevent error by checking existence of .gitconfig
2016-09-16 17:47:58 +02:00
Joakim Nohlgård
ee486fd908
Merge pull request #5794 from smlng/pr/fix_osx_5742
...
correcting linker LTO flags on OSX
2016-09-16 17:37:52 +02:00
Cenk Gündoğan
f41f7bd8ff
vagrant: prevent error by checking existence of .gitconfig
2016-09-16 17:15:24 +02:00
Joakim Nohlgård
8160717485
boards/nucleo-f207: Use cortex_m3_2 MCU_GROUP
2016-09-16 17:07:14 +02:00
Cenk Gündoğan
c767f27168
vagrant: sync Tutorials folder into vbox
2016-09-16 16:32:20 +02:00
Cenk Gündoğan
674f7a1cf9
Merge pull request #5843 from smlng/pr/boards/nucleo-f207/fixing_cpp11
...
nucleo-f207: fix uart configuration init
2016-09-16 12:10:04 +02:00
smlng
fc9e1d9024
kw2xrf: set tx_power in gnrc_netdev_t
...
without this patch, tx_power is directly set on the device but not in
gnrc_netdev_t. Thus, calling ifconfig in shell shows tx_power always
at 0dBm, never showing the correct, current value. Additionally, it
verifies that given tx_power to be set is in valid range.
2016-09-16 10:52:53 +02:00
add6e1d36d
Merge pull request #5674 from aabadie/driver_io1_xplained
...
drivers/io1_xplained: initial implementation of Atmel IO1 Xplained extension board
2016-09-16 10:35:49 +02:00
smlng
20fd33c927
nucleo-f207: fix uart configuration init
2016-09-15 13:43:57 +02:00
Matthias Kolja Miehl
c5cfacebc3
cpu/stm32l1: uart: make sure 'dev' is != NULL to avoid nullPointer errors
2016-09-13 22:22:48 +02:00
Matthias Kolja Miehl
1d1e6c44e4
sys/shell: fix cppcheck warnings
2016-09-13 22:07:57 +02:00
Martine Lenders
8a74475e70
Merge pull request #5761 from mali/rmdeadcode
...
boards/atmega_common: remove dead code on link
2016-09-12 17:01:15 +02:00
Martine Lenders
03fbe9c2a5
Merge pull request #5766 from zhuoshuguo/fix_cpu_atmega_header_include_guards
...
fix cpu/atmega header include guardes.
2016-09-12 17:00:56 +02:00
Martine Lenders
55a08aeb59
Merge pull request #5827 from miri64/make/enh/quiet-per-default
...
make: build quiet as default
2016-09-12 16:59:59 +02:00
smlng
291c1a54eb
native: correcting linker LTO flags for OSX
...
- corrects and enhances changes introduced in #5742
2016-09-12 15:41:38 +02:00
Martine Lenders
9cb73dd63f
Merge pull request #5832 from immesys/patch-1
...
samd21: i2c: clear timeout_counter
2016-09-12 15:08:06 +02:00
Martine Lenders
b5f22a73ef
Merge pull request #5836 from gebart/pr/quiet-typo
...
Makefile.buildtests: Fix typo QUITE -> QUIET
2016-09-12 14:26:51 +02:00
Martine Lenders
d301ae279b
Merge pull request #5839 from cgundogan/pr/ccnl_example_docfix
...
examples: ccn-lite-relay: minor doc fix
2016-09-12 13:50:29 +02:00
Cenk Gündoğan
c0f05a8a88
examples: ccn-lite-relay: minor doc fix
2016-09-11 22:39:20 +02:00
Matthias Kolja Miehl
0bb7050c60
cpu/stm32f3: uart: make sure that 'port' and 'dev' are !=NULL
...
This fixes some cppcheck nullPointer errors.
2016-09-11 17:19:59 +02:00
Matthias Kolja Miehl
2ba795eb81
cpu/stm32f0: uart: make sure that 'port' and 'dev' are !=NULL
...
This fixes some cppcheck nullPointer errors.
2016-09-11 16:56:35 +02:00
Joakim Nohlgård
c6f280a104
dist/tools/drone-scripts: Delete because Drone can now use the Travis script
2016-09-11 14:41:42 +02:00
Joakim Nohlgård
2df85d7100
travis: Add missing host build group
2016-09-11 14:39:34 +02:00
Joakim Nohlgård
0a61415fb0
drone: Update to Drone v0.5 yaml format
2016-09-11 14:39:08 +02:00
Joakim Nohlgård
0fe461f1e4
Makefile.buildtests: Fix typo QUITE -> QUIET
2016-09-11 12:54:14 +02:00
Andreas "Paul" Pauli
662076e150
Merge pull request #5747 from miri64/tests/feat/od-test
...
tests: provide tests for od module
2016-09-10 15:24:01 +02:00
Laurent Navet
4c9c3ab7d6
cpu/atmega_common: fix timer_set_absolute return code
...
according to timer documentation, timer_set and timer_set_absolute should
return 1 on succes, not 0.
2016-09-10 00:12:39 +02:00
Martine Lenders
5552b92023
Merge pull request #5831 from mali/timer
...
drivers/timer: fix copy/paste error
2016-09-08 22:22:38 +02:00
Martine Lenders
2cc52fba19
tests: provide tests for od module
2016-09-08 20:02:24 +02:00
597409574d
Merge pull request #5801 from miri64/pkg/enh/lwip-mbox-port
...
lwip: port mboxes to core_mbox
2016-09-08 13:36:29 +02:00
Michael Andersen
082d8e85a9
samd21: i2c: clear timeout_counter
...
If not cleared, long writes timeout incorrectly
2016-09-07 18:21:38 -07:00
Laurent Navet
f30c4ade2c
drivers/timer: fix copy/paste error
2016-09-07 21:59:25 +02:00
Jon Thacker
e0365e0bf9
atmega: use software interrupt for context swap
...
Fixes #5745
For AVR based boards, three defines must be defined AVR_CONTEXT_SWAP_INIT,
AVR_CONTEXT_SWAP_INTERRUPT_VECT, and AVR_CONTEXT_SWAP_TRIGGER.
These defines are used to trigger a software interrupt used for context
switching.
When AVR_CONTEXT_SWAP_INTERRUPT_VECT is handled, the scheduler is run
and a context swap will happen if necessary, with the resulting thread
starting following the reti instruction. This results in threads running
at normal priority instead of at interrupt priority.
Atmega devices do provide a pure software interrupt. The method used
here for waspmote-pro and arduino-mega2560 is to use pin change
interrupts, set the pin to act as an output, and toggle the value to
simulate a software interrupt. The main limitation here is that a
physical pin is now occupied and must be defined for each board
supported by RIOT. On the plus side, it provides an easy method for
detecting context swaps with an oscilloscope.
2016-09-07 14:35:53 -05:00