Ludwig Ortmann
6262c4427e
make: add gpio feature
2014-10-06 18:55:54 +02:00
René Kijewski
f49bd3e660
make: add Makefile.features telling the BOARDs' features
...
Please see #1715 .
Closes #1715 .
This PR implements the new Makefile variables "FEATURES_PROVIDED" and
"FEATURES_REQUIRED". A board *can* have a new file `Makefile.features`
which looks like:
```make
FEATURES_PROVIDED = transceiver
```
An application can have a corresponding line
```make
FEATURES_REQUIRED = transceiver
```
If the selected BOARD does not fulfil the requirements of the
application, then a *warning* is issued at compile time.
This change only includes the feature "transceiver", further features
are expected to be listed in further PRs. The requirement "transceiver"
is automatically added if the application uses the module
"defaulttransceiver".
`make buildtest` understands the new feature listing, so the user won't
need to add boards to `BOARD_BLACKLIST` manually.
Part of the change are the added Make targets
* `info-features-missing`, which prints the required features
`\setminus` the provided features. The output is empty if there are no
features missing.
* `info-boards-features-missing`, the same as `info-features-missing`
but as a table for all boards, but heeded `BOARD_WHITELIST` and
`BOARD_BLACKLIST`.
Applications don't have to use this new feature. This change does not
break existing Makefile.
2014-10-06 17:42:11 +02:00
René Kijewski
e9c369e2d7
redbee-econotag: don't print noisy warning
2014-10-06 17:34:35 +02:00
Hauke Petersen
bb94394784
board/iot-lab_M3: fixed default terminal device
2014-10-06 15:40:18 +02:00
Martine Lenders
ec24fbd6dc
Merge pull request #1751 from LudwigOrtmann/native_syscalls_p2
...
native: add two more syscall declarations
2014-10-01 22:14:15 +02:00
Ludwig Ortmann
b849b848a0
native: add two more syscall declarations
2014-10-01 21:56:43 +02:00
Thomas Eichinger
fccfce2d59
stm32f1: implement 32bit hwtimer by cascading two timers
2014-10-01 20:54:14 +02:00
Hauke Petersen
26dfa7c89c
Merge pull request #1464 from PeterKietzmann/stm32f4_spi_driver
...
Initial Stm32f4 spi driver
2014-09-30 13:40:01 +02:00
PeterKietzmann
d481af752f
initial import of stm32f4discovery spi low-level driver
2014-09-30 13:18:27 +02:00
Hauke Petersen
25c891ecdd
Merge pull request #1736 from haukepetersen/fix_stm32f1_somecleanup
...
board/iot-lab_M3: cleanup of SPI and radio driver
2014-09-30 12:02:42 +02:00
Hauke Petersen
a990217a54
board/iot-lab_M3: added clock config to periph_conf
2014-09-30 11:26:00 +02:00
Hauke Petersen
ae066f60d8
board/iot-lab_M3: cleanup of AT86RF231 driver
...
- removed board specific code
- added interface definitions to board.h
2014-09-30 11:19:23 +02:00
Hauke Petersen
af1e012efc
board/iot-lab_M3: cleaned up SPI in periph_conf.h
2014-09-30 11:19:16 +02:00
Ludwig Ortmann
f539f30691
Merge pull request #1698 from Kijewski/ssize_t-for-all
...
core: Provide ssize_t in a common place
2014-09-27 00:26:34 -07:00
Ludwig Ortmann
99760f3825
Merge pull request #1696 from N8Fear/mega2560-debug
...
boards:mega2560: add debug and debug-server targets
2014-09-26 06:43:36 -07:00
Hinnerk van Bruinehsen
17fe3f4348
boards:mega2560: add debug and debug-server targets
2014-09-26 15:09:37 +02:00
Thomas Eichinger
d0b0af6d81
stm32f*: rename STDIO buffer and enable getchar with UART0
2014-09-26 14:16:59 +02:00
Thomas Eichinger
c83e4cb361
stm32f1: unify UART0 use
2014-09-26 14:16:59 +02:00
Thomas Eichinger
aefa818338
stm32f4: be UART0 aware
2014-09-26 14:16:31 +02:00
Thomas Eichinger
8fc2e61e20
stm32f0: be UART0 aware
2014-09-26 14:16:31 +02:00
René Kijewski
866c713a7e
native: -DNATIVE_INCLUDES if using NATIVEINCLUDES
...
It can be useful to know if the current compilation builds the native
board module, because e.g. then we must not include `sys/types.h`.
This diff adds `-DNATIVE_INCLUDES` to the make variable
`NATIVEINCLUDES`.
2014-09-26 13:59:37 +02:00
Thomas Eichinger
1c150cee18
Merge pull request #1701 from thomaseichinger/samr21
...
cpu/board: Initial import of samr21-xpro
2014-09-25 15:48:06 +02:00
Hauke Petersen
5fd6c265f6
Merge pull request #1622 from haukepetersen/fix_pca_sripts
...
board/pca1000x: added/fixed dist scripts
2014-09-25 15:02:33 +02:00
Thomas Eichinger
bf256f63a3
samr21-xpro: initial import for the samr21-xpro board
2014-09-25 14:37:47 +02:00
Hauke Petersen
934eb44c13
Merge pull request #1488 from haukepetersen/add_stm32f0_spi
...
board/cpu: added SPI driver for the stm32f0discovery
2014-09-25 11:59:11 +02:00
Oleg Hahm
9b4d22aaa0
pyterm: make pin toggling optional
...
For the MSB-A2 the DTR and RTS pins have to be pulled down over the
serial interface in the beginning. (This is required because the Linux
usbserial driver pulls them up when initializing the device which set
the node into reset mode.) Since this is not necessary on most other
platforms and might even cause problems, it's better to make this an
optional behavior of pyterm.
2014-09-24 17:05:36 +02:00
Hauke Petersen
cdb335e21d
[SQUASH ME] stm32f0: substantial fixes to SPI driver
2014-09-24 15:41:48 +02:00
Hauke Petersen
ff4854341a
[SQUASH ME] finished 0.1 of spi driver
2014-09-24 15:41:47 +02:00
Hauke Petersen
c494e3ab09
board/cpu: added SPI driver for stm32f0discovery
2014-09-24 15:41:47 +02:00
Hinnerk van Bruinehsen
567ebf987f
lint: limit maximum length of input via scanf
2014-09-19 23:31:26 +02:00
Christian Mehlis
a6ff40b6d7
iot-lab_M3: fix numof uart
2014-09-19 17:12:38 +02:00
Hauke Petersen
34aaa61eb0
Merge pull request #1486 from haukepetersen/fix_sam3x_finish_gpio
...
cpu/boards: completed GPIO driver for sam3x8e
2014-09-19 13:21:09 +02:00
Hauke Petersen
905283131b
board/yunjia-nrf5182: adjusted openocd.cfg
2014-09-19 12:46:19 +02:00
Ludwig Ortmann
d7cdc85758
Merge pull request #1677 from LudwigOrtmann/headers
...
doc: add license headers to some .h files
2014-09-18 10:47:30 -07:00
Hauke Petersen
50ba74b7dc
cpu/boards: completed GPIO driver for sam3x8e
...
- adjusted peripheral conf for udoo and arduino-due
- added gpio_init_int()
- added interrupt service routines
- fixed gpio_read()
- added clock enable for gpio_init_in()
2014-09-18 18:29:02 +02:00
Ludwig Ortmann
289c4c0ee4
doc: add license headers to some .h files
2014-09-18 17:45:11 +02:00
Hauke Petersen
8499a2c0ca
board/pca1000x: small fixes to periph_conf.h files
2014-09-17 14:44:13 +02:00
Hauke Petersen
e0fec98477
boards: initial import of yunjia-nrf51822 board
2014-09-17 14:44:13 +02:00
Hinnerk van Bruinehsen
c85fa9789b
boards: redbee: add missing semicolon
2014-09-16 19:57:08 +02:00
Thomas Eichinger
db95cff5cd
iot-lab_M3: fixing term make target
2014-09-15 15:59:01 +02:00
Hinnerk van Bruinehsen
2faf813793
board/sys: move bounds check before array access
2014-09-14 01:56:11 +02:00
Hinnerk van Bruinehsen
bc0a05f19d
boards: msba2-common tools: reduce scope
2014-09-13 19:47:58 +02:00
René Kijewski
0cc699c0ce
lint: reduce scope
...
Fix some lint warnings of kind
```
style (variableScope): The scope of the variable '…' can be reduced
```
2014-09-12 11:50:12 +02:00
Thomas Eichinger
75adcb8d8b
Merge pull request #1629 from thomaseichinger/iot-lab_debugger++
...
iot-lab_M3: extend debug target for iot-lab_M3
2014-09-04 20:01:12 +02:00
Ludwig Ortmann
3d29a9e3d3
native: add support for Linux on ARM
2014-09-04 16:39:33 +02:00
Fabian Nack
e8a33d58db
board - msbiot: initial import for the msbiot
2014-09-02 15:45:32 +02:00
Thomas Eichinger
b505df23a5
SQUASHME: kill openocd by PID
2014-09-02 11:41:41 +02:00
Thomas Eichinger
8945768c91
iot-lab_M3: extend debug target for iot-lab_M3
2014-09-02 10:35:48 +02:00
Ludwig Ortmann
2439bd839c
doc: fix more license headers
...
Remove some cruft, set correct lgpl versions, update to lgpl where
this had been overlooked in the past, fix odd comment style...
2014-08-27 19:20:49 +02:00
Hinnerk van Bruinehsen
223e22ac1e
board: arduino-mega2560: Initial import
2014-08-27 16:39:40 +02:00
