chrysn
d196c7c4a6
drivers/saul/auto_init: Add PWM for LEDs
...
In analogy to the existing GPIO mappings, this provides (write-only)
SAUL entries for PWM'd LEDs in a single-LED (as SAUL_ACT_DIMMER) and an
RGB (as SAUL_ACT_RGB_LED) mode.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
2020-10-17 11:20:17 +02:00
Francisco
3918d714ce
Merge pull request #13624 from wosym/pr/candev_mcp2515
...
tests/candev: add mcp2515 + driver/mcp2515: add driver
2020-10-08 09:45:40 +02:00
Karl Fessel
9a89b84c2c
Makefile.dep: sort dependencies
...
move most dependencies from <RIOTBASE>/Makefile.dep to the Makefile.dep where
dependant module resides
2020-10-05 18:27:58 +02:00
Wouter Symons
757f810118
drivers/mcp2515: complete driver + adapt to 2020 RIOT API
2020-10-03 15:20:42 +02:00
Jose Alamos
8289612529
Makefile.dep: fix netdev_register resolution
2020-09-30 16:33:39 +02:00
Jose Alamos
413ffbb035
netdev: make netdev_% variants a submodule
2020-09-29 12:16:34 +02:00
nagrawal
7cc4f2b79b
driver/sdp3x: Resolved irq pin code used even if irq pin not connected
...
irq_pin check when multiple sensors connected with or without irq pin
2020-07-30 16:35:35 +02:00
0c86b72ed6
drivers/Makefile.dep: remove global dependency resolution
...
Only keep the dependency resolution for drivers declared as pseudo-modules
2020-07-20 14:32:16 +02:00
f013be5507
Merge pull request #14497 from aabadie/pr/drivers/makefile_dep_cleanup
...
drivers/Makefile.dep: remove inappropriate use of FEATURES_PROVIDED for rtt_rtc
2020-07-20 13:04:59 +02:00
Benjamin Valentin
96c67b0fa5
drivers/soft_uart: add software based UART implementation
2020-07-14 22:51:59 +02:00
1cf8f0dc45
drivers/Makefile.dep: remove useless FEATURES_PROVIDED for rtc_rtt
2020-07-10 18:12:31 +02:00
Daniel Lockau
0d3dc120ef
drivers/sdcard_spi: remove auto-init
2020-07-09 08:50:53 +02:00
Francisco
325b7a8d8e
Merge pull request #13631 from benpicco/cpu/sam0_common/spi-deinit
...
drivers/periph/spi: add periph_spi_reconfigure feature & implementation for sam0
2020-06-30 15:34:53 +02:00
Leandro Lanzieri
955efd85ff
drivers/at: Add at_urc_isr module to process URCs upon arrival
2020-06-30 11:41:13 +02:00
benpicco
a92dac5701
Merge pull request #14329 from Nishchay-sopho/drivers/sdp3x
...
driver/sdp3x : Add driver for sdp3x sensor
2020-06-29 21:16:39 +02:00
Dirk Ehmen
05980765f2
drivers/sdp3x: Driver for sensirion sdp3x sensor
2020-06-29 20:50:41 +02:00
benpicco
f372beb405
Merge pull request #12363 from maribu/dfplayer
...
drivers/dfplayer: New driver for the DFPlayer Mini MP3 player
2020-06-28 23:24:36 +02:00
Marian Buschsieweke
82bfb66cb8
drivers: Added driver for the DFPlayer MP3 player
2020-06-28 21:06:43 +02:00
Gunar Schorcht
660a852935
drivers: add netdev driver for ATWINC15x0 WiFi module
2020-06-26 12:33:38 +02:00
benpicco
3665e40726
Merge pull request #14242 from HendrikVE/pr/driver/pca9633
...
driver/pca9633: add new driver
2020-06-26 00:44:24 +02:00
Hendrik van Essen
1430ddca55
driver/pca9633: add new driver
2020-06-25 22:31:15 +02:00
benpicco
b13085defb
Merge pull request #14110 from fabian18/mtd_at24cxxx
...
drivers/at24cxxx: MTD wrapper for at24cxxx
2020-06-24 18:46:36 +02:00
Benjamin Valentin
f3e28c0350
drivers/sdcard_spi: make use of spi_deinit_pins()
...
Make sure to de-init the SPI bus before using the pins as GPIO.
Once all archs implement periph_spi_reconfigure, we can drop mosi,
miso and clk pins from the `card->params` and just use the bus
getter functions.
2020-06-21 21:21:39 +02:00
ebc147d058
drivers/mhz19: initial support
2020-06-17 08:41:41 +02:00
benpicco
3a1ee4983c
Merge pull request #14010 from benpicco/at86rf215-mr-ofdm
...
drivers/at86rf215: implement MR-OFDM
2020-06-03 16:39:04 +02:00
Benjamin Valentin
cc5fbdf9f8
drivers/at86rf215: implement MR-OFDM
2020-06-03 15:58:50 +02:00
Leandro Lanzieri
16c6ecf28d
Merge pull request #14046 from benpicco/at86rf2xx-phy_modes
...
drivers/at86rf2xx: add support for high data rates
2020-06-03 08:35:30 +02:00
eee5bf178d
Merge pull request #13993 from benpicco/examples/filesystem-fatfs
...
examples/filesystem: add support for fatfs on SD card
2020-05-26 19:20:47 +02:00
Benjamin Valentin
616ebf9cfb
drivers/edbg_eui: add driver to get MAC address from Atmel EDBG
...
The EDBG debugger on the `samr21-xpro` contains a unique 64 bit address
intended to be used as a MAC address for the internal radio.
This adds a driver to read that EUI-64 from the debugger, it should match
with the MAC address printed on the label on the board.
2020-05-26 10:44:11 +02:00
fabian18
9ecd836443
drivers/at24cxxx: add MTD wrapper for at24cxxx EEPROMs
2020-05-20 19:20:05 +02:00
Benjamin Valentin
3b2cfa6478
drivers/sdcard_spi: add auto_init_storage to DEFAULT_MODULE
...
sdcard_spi is the only driver in auto_init_storage and was previously
pulled in by fatsfs (because it's used on SD cards)
It does however make much more sense if the SD card driver pulls that in
so other file systems can be used on SD card too.
2020-05-20 11:57:05 +02:00
Benjamin Valentin
baeb5134b7
drivers/mrf24j40: add Turbo Mode
...
MRF24J40 supports a proprietary turbo mode with a data rate of 625 kbit/s
instead of the standard 250 kbit/s.
It can be enabled through
ifconfig 7 set high_rate 1
2020-05-09 16:10:46 +02:00
Benjamin Valentin
ac040c6baf
drivers/at86rf2xx: add support for high data rates
...
AT86RF2xx supports high data rates in O-QPSK mode.
This is a proprietary feature, so data rates > 0 are only supported by
other AT86RF2xx devices.
high_rate 0: 250 kbit/s (IEEE mode)
high_rate 1: 500 kbit/s
high_rate 2: 1000 kbit/s (compatible with at86rf215)
high_rate 3: 2000 kbit/s
2020-05-09 01:24:08 +02:00
benpicco
8e11acc9f8
Merge pull request #13877 from ML-PA-Consulting-GmbH/feat/20200409__add_mtd_spi_eeprom
...
drivers/mtd_spi_eeprom: add MTD wrapper for AT25XXX EEPROMs
2020-05-06 15:56:34 +02:00
Johannes Koster
177a653bd1
drivers/at25xxx: add MTD wrapper for AT25XXX EEPROMs
...
drivers/at25xxx: add mtd_wrapper as submodule
tests: add mtd_at25xxx test module for mtd wrapper
drivers/Makefile.dep: add at25xxx dep for mtd_at25xxx module
2020-05-05 13:37:51 +01:00
Benjamin Valentin
e6d47aa825
drivers/at86rf215: implement MR-O-QPSK
2020-04-29 10:41:37 +02:00
Benjamin Valentin
0cf9f6aa7f
drivers/at86rf215: implement at86rf215_get_phy_mode()
2020-04-29 10:41:37 +02:00
Marian Buschsieweke
d3d2cdae8a
drivers/ws281x: Fix dependencies
...
arch_esp32 was missing in FEATURES_REQUIRED_ANY for the ws281x, resulting in
ESP32 boards incorrectly being reported as unsupported.
2020-04-09 13:30:18 +02:00
Leandro Lanzieri
6e49724a66
drivers/Makefile.dep: Set CONFIG_MRF24J40_USE_EXT_PA_LNA if not Kconfig
...
For the mrf24j40 check if Kconfig is being used before setting the
configuration CFLAG.
2020-04-08 18:49:32 +02:00
Leandro Lanzieri
ede9117a1e
drivers/mrf24j40: Turn MRF24J40_USE_EXT_PA_LNA into bool config
...
MRF24J40_USE_EXT_PA_LNA is moved to the 'CONFIG_' namespace and by
default is not set. Now it is checked in code using 'IS_ACTIVE'.
2020-04-08 18:49:30 +02:00
067b324645
Merge pull request #11945 from benpicco/EEPROM-m95m01
...
drivers: add driver for AT25xxx family of EEPROMs
2020-04-07 13:19:21 +02:00
Benjamin Valentin
97fc2f2af1
drivers: add AT25xxx series EEPROM
...
This adds a driver for the ST M95xxx series SPI EEPROMs.
The driver has been tested with the M95M01 EEPROM, but should
work with other chips from that family.
SPI-EEPROMs from other vendors from the families AT25xxx, 25AAxxx,
25LCxxx, CAT25xxx & BR25Sxxx should also in the same way.
2020-04-07 12:31:46 +02:00
Leandro Lanzieri
c74544c9ec
Merge pull request #13349 from maribu/dependency-or
...
build system: Restructure dependency resolution
2020-04-02 10:40:44 +02:00
benpicco
660b1a9b5f
Merge pull request #10083 from gschorcht/drivers_hmc5883l
...
drivers: add driver for Honeywell HMC5883L magnetometer
2020-04-01 14:49:34 +02:00
Gunar Schorcht
e6090adb3f
drivers: add hmc5883l device driver
2020-04-01 13:37:22 +02:00
Marian Buschsieweke
007ac492ff
drivers/ws281x: Use FEATURES_REQUIRED_ANY
2020-04-01 09:12:50 +02:00
Christian Friedrich Coors
08703766fc
drivers/ws281x: Add ESP32 support
2020-03-25 17:25:35 +01:00
Francisco
cdbf0b2d69
Merge pull request #13583 from benpicco/at86rf215-minimal
...
drivers/at86rf215: add basic support for AT86RF215 dual-band radio
2020-03-20 09:33:50 +01:00
benpicco
5435792034
Merge pull request #12277 from benemorius/pr/kw41zrf
...
drivers: add kw41zrf
2020-03-20 00:49:56 +01:00
Joakim Nohlgård
5bd67d88a8
drivers/kw41zrf: Transceiver driver for the KW41Z radio
...
This is the radio found in NXP Kinetis KW41Z, KW21Z. Only 802.15.4 mode
is implemented (KW41Z also supports BLE on the same transceiver).
The driver uses vendor supplied initialization code for the low level
XCVR hardware, these files were imported from KSDK 2.2.0 (framework_5.3.5)
2020-03-19 17:00:04 -05:00
