35a3c4ddfe
drivers/ds75lx: add basic driver
2019-05-22 16:54:19 +02:00
1f4dee90a1
drivers/lpsxxx: unify lps331ap and lps25h drivers
2019-03-20 14:43:36 +01:00
Joakim Nohlgård
a6f430b4b5
drivers/ds3234: Minimal driver for DS3234 extremely accurate RTC
...
This driver currently only supports the SPI connected DS3234, and only
for initializing 1 Hz square wave output on the SQW pin, nothing else.
2019-02-19 11:57:40 +01:00
Leandro Lanzieri
50dc5b7528
drivers: Add driver for AD7746 capacitance sensor
2019-02-15 13:31:18 +01:00
Kees Bakker
50ec5130d6
drivers: add support for SHT2x (I2C temp and humidity sensor)
...
Several parts were inspired by a driver written by:
George Psimenos (gp7g14@soton.ac.uk )
Steffen Robertz (steffen.robertz@rwth-aachen.de )
2019-02-05 22:17:30 +01:00
Michel Rottleuthner
f5dc2524d0
drivers: add driver for SDS011 active laser dust sensor
2019-01-30 13:15:17 +01:00
Marian Buschsieweke
c00886ac39
drivers/ltc4150: (Re-)implemented LTC4150 driver
...
The LTC4150 is a coulomb counter (a.k.a. battery sensor or bidirectional
current sensor) that is used in the MSBA2 board and available for little money
as easy to use break out board.
2019-01-28 13:44:16 +01:00
steffen
2ff2b2c1d7
drivers: Initial support for TPS6274x converter
...
drivers/tps6274x: initial support step-down converter
tests/driver_tps6274x: Added testcase for the step-down converter
boards/jiminy-mega256rfr2: Added TPS6274x config
2019-01-10 00:00:02 +01:00
Schorcht
74e1ab220c
drivers: add driver for CCS811 gas sensor
2018-12-20 12:42:44 +01:00
Marian Buschsieweke
003c04bd4c
Merge pull request #10012 from gschorcht/drivers_sht3x
...
drivers: sht3x temperature and humidity sensor
2018-12-03 10:43:16 +01:00
Schorcht
9d59e27d41
drivers: add SHT3X humidity/temperature sensor
2018-11-21 08:48:20 +01:00
danpetry
99ae495226
Merge pull request #10011 from leandrolanzieri/pr/drivers/ds18
...
drivers/ds18: Add Maxim Integrated 1-Wire temperature sensor driver
2018-10-25 17:26:10 +02:00
Frits Kuipers
8b8790c18f
drivers/ds18: Add Maxim Integrated ds18 driver
...
tests/driver_ds18: Add test application for DS18B20 sensor.
tests/driver_ds18: Add whitelist of boards
2018-10-24 16:02:05 +02:00
danpetry
a1a834a726
drivers/tsl4531x: Add power modes; redesign
...
Changes include:
- Implementation of two power modes for the driver: low and high
- Redesign and API change to the description in tsl4531x.h
- Full documentation
- Changing file structure and implementation to fit best practices as
described in
https://github.com/RIOT-OS/RIOT/wiki/Guide%3A-Writing-a-device-driver-in-RIOT
- Including I2C addresses for the rest of the range
2018-10-23 17:26:28 +02:00
1ca44cf072
drivers/vcnl40x0: initial implementation
2018-10-15 11:44:10 +02:00
Semjon Kerner
b24de4a22a
drivers/srf04: initial driver implementation
2018-09-20 15:18:49 +02:00
Michael Andersen
e354824bcf
drivers/mma7760: Add initial support
2018-08-02 15:52:58 +02:00
6e6716a1a6
Merge pull request #9317 from maribu/sht1x
...
drivers/sht11: Major refactoring
2018-06-27 10:10:39 +02:00
Marian Buschsieweke
de9b67bdc2
drivers/sht1x: Major refactoring
...
- Use RIOT's GPIO interface to access the sensor to increase portability
- Changed API to allow more than one sensor per board
- Added `sht1x_params.h` that specifies how the sensors is connected - each
board can overwrite default settings by #defining SHT1X_PARAM_CLK and
SHT1X_PARAM_DATA
- Changed arithmetic to use integer calculations only instead of floating point
arithmetic
- Added support for checking the CRC sum
- Allow optional skipping of the CRC check to speed up measuring
- Added support for advanced features like reducing the resolution and skipping
calibration to speed up measuring
- Allow specifying the supply voltage of sensor which heavily influences the
temperature result (and use that information to calculate the correct
temperature)
- Reset sensor on initialization to bring it in a well known state
- Support for the obscure heater feature. (Can be useful to check the
temperature sensor?)
- Updated old SHT11 shell commands to the new driver interface, thus allowing
more than one SHT10/11/15 sensor to be used
- Added new shell command to allow full configuration of all attached SHT1x
sensors
- Removed old command for setting the SHT11 temperature offset, as this feature
is implemented in the new configuration command
2018-06-27 08:58:00 +02:00
Hyungsin
0c5c3d9b77
driver/pir: add pir-based occupancy sensing
2018-06-26 13:46:37 -07:00
372aadd626
Merge pull request #8978 from Hyungsin/forupstream_fxos8700
...
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-14 08:45:58 +02:00
Hyungsin
beaf08bcb2
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-12 17:51:58 -07:00
Matthew Blue
96a7029f5f
drivers/ads101x: Makefile support
2018-04-13 11:38:49 -04:00
3a6a3b8b14
drivers/si114x: initial basic support
2018-03-08 14:07:28 +01:00
ac5be2add2
drivers: sort alphabetically Makefile.include
2018-02-21 13:24:46 +01:00
88bc7ccd6f
drivers: fix indentation in Makefile.include
...
- soft_spi was using a 4 spaces indentation, but only 2 are required
2018-02-21 10:38:19 +01:00
Semjon Kerner
83153d6925
drivers/bmx055: initial implementation
2018-02-19 14:27:39 +01:00
Gaëtan Harter
934b075f76
Merge pull request #7883 from Hyungsin/hamilton-pushbutton
...
pulse counter driver: initial SAUL-compatible implementation
2018-01-30 19:35:44 +01:00
4bc4c56d02
drivers/ata8520e: initial implementation
2018-01-25 12:01:57 +01:00
Hauke Petersen
09dab1a9fb
drivers: add support for STM lis2dh12 accelerometer
2018-01-18 18:39:43 +01:00
b63412efa1
drivers: add rn2xx3 LoRa module driver
2018-01-18 10:46:54 +01:00
Hyungsin
a0587ca306
drivers/pulse_counter: initial implementation
2018-01-17 06:28:13 -08:00
steffen
1d38c7d939
drivers/lc709203f: Added support for the LC709203F Fuel Gauge
2018-01-15 17:48:27 +01:00
b39a3d79ef
drivers/lis3mdl: update to new parameters scheme
2017-12-14 18:18:20 +01:00
smlng
55cda8d8ab
drivers: add hts221 temperature and humidity sensor
2017-11-21 09:42:07 +01:00
marble
fbba6c3851
driver/soft_spi: initial implementation
2017-11-13 10:11:06 +01:00
6f43e98b95
drivers/si70xx: cleanup and use pseudomodules
2017-11-05 18:13:19 +01:00
984e78746f
drivers: fix Makefile.include indentation
2017-09-06 16:09:54 +02:00
Hauke Petersen
9bde34df33
drivers: add driver for apa102 RGB LEDs
2017-09-01 09:37:31 +02:00
smlng
e5e933e332
drivers: add grove ledbar driver
2017-08-30 09:07:35 +02:00
smlng
ecaca83b0b
drivers: add my9221 led controller
2017-08-30 09:06:03 +02:00
Martine Lenders
d07bfb4c9f
ds1307: initial import of a driver for the DS1307 RTC
2017-07-31 14:39:09 +02:00
0ccc264538
drivers: initial implementation of sx127x radio (LoRa mode only)
2017-06-30 19:00:40 +02:00
Martine Lenders
9d3f9f2589
Merge pull request #6402 from OTAkeys/pr/adcxx1c
...
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 10:39:02 +02:00
Vincent Dupont
35056fd647
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 09:46:03 +02:00
smlng
42a09128aa
drivers: rework tmp006
2017-06-14 20:44:59 +02:00
4a852abd03
drivers/bmx280: factorize bme280 and bmp280 implementation
2017-06-02 14:54:17 +02:00
a4e16cd7e9
drivers/dsp0401: initial implementation
2017-05-26 15:24:51 +02:00
Vincent Dupont
73d8149490
drivers: add lsm6dsl imu driver
2017-04-06 10:58:18 +02:00
Loïc Dauphin
47cfe0ac66
drivers/dynamixel: initial support
2017-03-31 11:44:14 +02:00
