Oleg Hahm
cbb4b6b9c2
Merge pull request #1702 from OlegHahm/pyterm_dtr_option
...
pyterm: make pin toggling optional
2014-09-24 17:06:05 +02:00
Oleg Hahm
9b4d22aaa0
pyterm: make pin toggling optional
...
For the MSB-A2 the DTR and RTS pins have to be pulled down over the
serial interface in the beginning. (This is required because the Linux
usbserial driver pulls them up when initializing the device which set
the node into reset mode.) Since this is not necessary on most other
platforms and might even cause problems, it's better to make this an
optional behavior of pyterm.
2014-09-24 17:05:36 +02:00
Hauke Petersen
127095ada0
[SQUASH ME] cpu: removed slave mode
2014-09-24 15:41:48 +02:00
Hauke Petersen
1f1360eff9
[SQUASH ME] test: fixed according to updated GPIO interface
2014-09-24 15:41:48 +02:00
Hauke Petersen
1020d90b2b
[SQUASH ME] test: guard if no SPI device defined
2014-09-24 15:41:48 +02:00
Hauke Petersen
cdb335e21d
[SQUASH ME] stm32f0: substantial fixes to SPI driver
2014-09-24 15:41:48 +02:00
Hauke Petersen
faf930e36b
[SQUASH ME] tests/periph_spi: rewrote test
2014-09-24 15:41:48 +02:00
Hauke Petersen
969b8401d8
tests: added periph_spi test
2014-09-24 15:41:48 +02:00
Hauke Petersen
7904076668
cpu: mini cleanup to spi driver
2014-09-24 15:41:48 +02:00
Hauke Petersen
7d5b3263d5
SPI: more fixes including DEBUG info
2014-09-24 15:41:48 +02:00
Hauke Petersen
ff4854341a
[SQUASH ME] finished 0.1 of spi driver
2014-09-24 15:41:47 +02:00
Hauke Petersen
c494e3ab09
board/cpu: added SPI driver for stm32f0discovery
2014-09-24 15:41:47 +02:00
Yao Wei
b5d3c65672
Add 0x7f as backspace key in shell
2014-09-24 15:40:21 +08:00
Ludwig Ortmann
31682af05a
Merge pull request #1688 from N8Fear/naninarith
...
lint: supress warnings about nan/infty in arithmetics in the CBOR unit tests
2014-09-22 05:18:33 -07:00
René Kijewski
dc20a6d142
Merge pull request #1691 from LudwigOrtmann/issue-1636-p2
...
Travis: merge install commands
2014-09-22 12:17:37 +02:00
Ludwig Ortmann
5a772ddb43
Travis: merge install commands
2014-09-22 11:32:44 +02:00
René Kijewski
ee145d8c2e
Merge pull request #1689 from LudwigOrtmann/issue-1636-p1
...
Travis: enable apt caching
2014-09-20 22:18:14 +02:00
Hinnerk van Bruinehsen
a832989c02
Merge pull request #1432 from LudwigOrtmann/cppcheck
...
tests: enable cppcheck for PR in travis
2014-09-20 18:20:22 +02:00
Ludwig Ortmann
811f07ab89
tests: run cppcheck for PR in Travis
...
Failures are ignored for now.
2014-09-20 16:17:02 +02:00
Ludwig Ortmann
b31bd22a2c
Travis: enable apt caching
...
This should speed up the installation process a bit.
2014-09-20 13:20:30 +02:00
René Kijewski
013e1bce97
Merge pull request #1687 from N8Fear/invalidscanf
...
lint: limit maximum length of input via scanf
2014-09-20 00:07:28 +02:00
Hinnerk van Bruinehsen
bef32717bf
test:cbor: supress warnings about nan/infty
2014-09-19 23:59:49 +02:00
Hinnerk van Bruinehsen
567ebf987f
lint: limit maximum length of input via scanf
2014-09-19 23:31:26 +02:00
Hauke Petersen
bf5effd913
Merge pull request #1686 from mehlis/iot-lab_M3-fix-numof-uart
...
iot-lab_M3: fix numof uart
2014-09-19 17:17:23 +02:00
Christian Mehlis
a6ff40b6d7
iot-lab_M3: fix numof uart
2014-09-19 17:12:38 +02:00
Philipp Rosenkranz
973fff7097
Merge pull request #1610 from phiros/feature_pytermcontroller
...
dist/pyterm: control server incl. support for multiple testbeds
2014-09-19 15:18:48 +02:00
Philipp Rosenkranz
2a67363be3
dist: pyterm control server (incl. support for multiple testbeds)
2014-09-19 14:42:15 +02:00
Hauke Petersen
34aaa61eb0
Merge pull request #1486 from haukepetersen/fix_sam3x_finish_gpio
...
cpu/boards: completed GPIO driver for sam3x8e
2014-09-19 13:21:09 +02:00
Christian Mehlis
88ae531ef9
Merge pull request #1679 from cgundogan/bloom_t_as_typedef
...
sys: use typedef for `struct bloom_t`
2014-09-19 13:18:39 +02:00
Christian Mehlis
283076880b
Merge pull request #1685 from haukepetersen/fix_nrf_stacksizes
...
cpu/nrf51822: adjusted default stack sizes
2014-09-19 13:07:17 +02:00
Hauke Petersen
4411b6b53f
cpu/nrf51822: adjusted default stack sizes
2014-09-19 13:02:23 +02:00
Christian Mehlis
71daa3aedd
Merge pull request #1684 from haukepetersen/fix_yunjia_openocd
...
board/yunjia-nrf51822: adjusted openocd.cfg
2014-09-19 12:59:29 +02:00
Hauke Petersen
905283131b
board/yunjia-nrf5182: adjusted openocd.cfg
2014-09-19 12:46:19 +02:00
Ludwig Ortmann
d7cdc85758
Merge pull request #1677 from LudwigOrtmann/headers
...
doc: add license headers to some .h files
2014-09-18 10:47:30 -07:00
Hauke Petersen
50ba74b7dc
cpu/boards: completed GPIO driver for sam3x8e
...
- adjusted peripheral conf for udoo and arduino-due
- added gpio_init_int()
- added interrupt service routines
- fixed gpio_read()
- added clock enable for gpio_init_in()
2014-09-18 18:29:02 +02:00
Hauke Petersen
0f716ba978
Merge pull request #1623 from haukepetersen/add_board_yunjia
...
Add board yunjia
2014-09-18 18:07:16 +02:00
Hauke Petersen
905c97db5d
tests/examples: blacklisted yunjia-nrf51822
2014-09-18 18:02:46 +02:00
Ludwig Ortmann
289c4c0ee4
doc: add license headers to some .h files
2014-09-18 17:45:11 +02:00
Cenk Gündoğan
0a4ea07daa
sys: use typedef for struct bloom_t
...
`bloom_t` is defined as a struct.
`_t` can mislead the user to think of bloom_t
as a typedef (see our coding conventions) instead of a struct.
Thus, I modified `struct bloom_t` to be a *typedefed* struct.
Another solution would be to rename bloom_t to sth. like bloom_s
everywhere and use `struct bloom_s` instead of `bloom_t`.
2014-09-17 19:54:40 +02:00
Martine Lenders
429218e3b4
Merge pull request #1678 from OlegHahm/fix_typo
...
drivers: fixed German influenced typo
2014-09-17 16:01:37 +02:00
Oleg Hahm
66904fbabb
drivers: fixed German influenced typo
2014-09-17 15:21:15 +02:00
Hauke Petersen
8499a2c0ca
board/pca1000x: small fixes to periph_conf.h files
2014-09-17 14:44:13 +02:00
Hauke Petersen
c9c7bfad38
cpu/nrf51822: some fixes and clean up
...
- enabled power for uart and timer
- outsourced timer config values to periph_conf.h
- made linkerscript better readable
- adjusted default stack-sizes
- let RED_LED blink on hard_fault
2014-09-17 14:44:13 +02:00
Hauke Petersen
e0fec98477
boards: initial import of yunjia-nrf51822 board
2014-09-17 14:44:13 +02:00
René Kijewski
c61721cac0
Merge pull request #1665 from N8Fear/uninitvar
...
lint: fix warnings because of uninitialized variables
2014-09-17 01:40:45 +02:00
Hinnerk van Bruinehsen
d5fe9de5e5
cpu: change __ASM to asm (cppcheck uninitvar error)
2014-09-17 00:20:20 +02:00
Hinnerk van Bruinehsen
c85fa9789b
boards: redbee: add missing semicolon
2014-09-16 19:57:08 +02:00
Ludwig Ortmann
6b0a549616
Merge pull request #1667 from LudwigOrtmann/cmsis-header
...
doc: tailor CMSIS doxygen for license checker
2014-09-16 03:57:09 -07:00
Oleg Hahm
22bf40e85e
Merge pull request #1675 from thomaseichinger/rf231_channel_setting
...
drivers/at86rf231: handle channel out of range more conveniently
2014-09-16 10:55:09 +02:00
Thomas Eichinger
adb4c15b65
drivers/at86rf231: handle channel out of range more conveniently
2014-09-16 10:52:59 +02:00