Enabling `ztimer_msec` through `sdmmc` in case `ztimer_usec` is not enabled will not work if the dependencies for `sdmmc` are resolved before the dependencies of another module that enables `ztimer_usec`. Therefore, `ztimer_msec` has to be enabled by `sdmmc`
19825: drivers: rename st7735 to more generic st77xx r=aabadie a=gschorcht
### Contribution description
This PR provides the following changes:
- renames the driver `st7735` to `st77xx`
- renames the test `st7735` to `st77xx`
- models controller variants as pseudomodules `st7735`, `st7789` and `st7796`
- removes the buggy initialization as a workaround to use reset defaults, see issue #19818
- adds backward compatibility header files for `ST7735_PARAM_*` symbols
- adds a test board for compilation test of backward compatibility
- updates the corresponding board definitions
The PR should solve the remaining dependency issues in KConfig we had by using `st7735` module for different controller variants. The backward compatibility header files should work for boards that still use `ST7735_PARAM_*` in their board definitions so that the board defintions at user's side use shouldn't be affected.
~To be compilable, the PR includes PR #19824.~
### Testing procedure
- Green CI
- `tests/drivers/disp_dev` and `tests/drivers/st77xx` should still work for all boards using a ST77xx display.
- The PR was already tested for these tests for:
- [x] `adafruit-pybadge`
- [x] `esp32s2-lilygo-ttgo-t8`
- [x] `esp32s3-usb-otg`
- [x] `sipeed-longan-nano`
### Issues/PRs references
Workaround for issue #19818
Preqruisite for PR #19827
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
If a board definition already used the ST7735 driver, `st7735*.h` header files and `ST7735_*` macros were used in the board definitions to define the default configuration parameter set. For backward compatibility these header files are kept and the `ST7735_*` macros are mapped to the `ST77XX_*` macros if they are defined.
19794: drivers/periph: Add documentation on thread safety and initialization r=aabadie a=maribu
19912: drivers/at86rf215: switch example config to use EXT3 on same54-xpro r=aabadie a=benpicco
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19355: boards/adafruit-itsybitsy-m4: configure littleFS on external flash r=aabadie a=benpicco
19883: drivers/stmpe811: introduce conversion for X and Y coordinates r=aabadie a=gschorcht
### Contribution description
To obtain coordinates from the touch panel that correspond to the display coordinates, it is often necessary to convert the coordinates by swapping and mirroring. Instead of hard coding this conversion, it is now controlled by an additional conversion parameter. For the sake of simplicity, possible rotations are predefined.
The PR fixes `tests/pkg/lgvl_touch` for the `stm32f429i-disc1` board where the coordinates from the touch panel seem to be mirrored in relation to the screen coordinates at the vertical axis.
### Testing procedure
Flash `tests/pkg/lvgl_touch`. Without this PR the coordinates of the button don't correspond to the touch panel coordinates once the button has been pressed. Instead they seem to be mirrored at the vertical axis. With this PR, the coordinates should be correct.
### Issues/PRs references
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
To obtain coordinates from the touch panel that correspond to the display coordinates, it is often necessary to convert the coordinates from the touch display by swapping and mirroring. For the sake of simplicity, possible rotations are additionally defined.
19908: drivers/mtd_spi_nor: fix init when only ztimer_msec is used r=aabadie a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19884: drivers/touch_dev_gestures: add gesture recognition for touch devices r=aabadie a=gschorcht
### Contribution description
This PR adds simple gesture recognition for touch devices accessed via the generic Touch Device API. It can be used in conjunction with device drivers that use either interrupts or polling mode. It supports up to two touches and the following gestures:
- Single and double tap at given position
- Long press and release given position
- Moving while pressed with current position
- Swipe left, right, up and down
- Zoom in (spread) and out (pinch)
Gesture recognition has been tested with:
- [x] `stm32f746g-disco` (works out of the box)
- [x] `stm32f723e-disco` (works out of the box)
- [x] `stm32f429i-disc1` (works on top of PR #19885)
- [x] `stm32l496g-disco` (works with my local LCD display changes waiting for PR #19825, not yet provided)
- [x] `esp32s3-wt32-sc01-plus` (new board, not yet provided)
### Testing procedure
Flash `tests/drivers/touch_dev_gestures` to a board with touch pane, for example:
```
BOARD=stm32f746g-disco make -j8 -C tests/drivers/touch_dev_gestures/ flash
```
PR #19885 is required for the `stm32f429i-disc1` board.
The output should look like this:
```
main(): This is RIOT! (Version: 2023.10-devel-121-g81c5c-drivers/touch_dev_gestures)
Single Tap X: 255, Y:154
Single Tap X: 253, Y:153
Double Tap X: 253, Y:149
Swipe right
Swipe down
Swipe left
Swipe up
Pressed X: 257, Y:155
Moving X: 257, Y:155
Moving X: 257, Y:155
Moving X: 259, Y:156
Moving X: 262, Y:157
Moving X: 266, Y:158
Moving X: 269, Y:160
Moving X: 273, Y:162
Moving X: 276, Y:165
Moving X: 278, Y:167
Moving X: 278, Y:169
Moving X: 278, Y:169
Released X: 279, Y:172
```
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19885: drivers/stmpe811: changes for interrupt-driven touch handling and gesture recognition r=aabadie a=gschorcht
### Contribution description
This PR contains changes needed for the purely interrupt-driven handling of the touch position as `touch_dev` device, which is a prerequisite for the realization of gesture recognition. (PR #19884).
The interrupt-driven approach of `touch_dev` devices (PR #19882) and the gesture recognition (PR #19884) need continuous reporting of the touch position as long as there is at least one touch. Since the driver so far only uses the _Touch Detect_ interrupt, only the position at the beginning of a touch is available. All further positions must be polled.
Therefore, the changes in this PR additionally enable the _FIFO Threshold_ interrupt when the `touch_dev` module is enabled. However, since the _Touch Detect_ interrupt does not work reliably when the _FIFO Threshold_ interrupt is enabled and the FIFO Threshold is 1, the FIFO Threshold is set to 2 by default when the `touch_dev` module is enabled.
Furthermore, the FIFO queue has to be reset after reading one touch position. Otherwise new touch positions are processed with a delay if the rate of calling the function to read the FIFO is slower than the rate at which the FIFO is filled. The reason for this is that with each call of this function only the oldest touch position is read value by value from the FIFO. Gestures can't be implemented with such a behavior.
### Testing procedure
1. `tests/drivers/stmpe811` should work as before (only a single position is shown):
```
BOARD=stm32f429i-disco make -j8 -C tests/drivers/stmpe811 flash
```
```
main(): This is RIOT! (Version: 2023.10-devel-120-g848d1-
drivers/stmpe811_touch_dev_gestures)
STMPE811 test application
+------------Initializing------------+
Initialization successful
Pressed!
X: 135, Y:131
Released!
```
2. `tests/drivers/stmpe811` should work on top of PR #19882 with continuous outputs of touch positions:
```
BOARD=stm32f429i-disco make -j8 -C tests/drivers/touch_dev flash
```
```
main(): This is RIOT! (Version: 2023.10-devel-121-g38d3db-drivers/stmpe811_touch_dev_gestures)
Event: pressed!
X: 131, Y:145
X: 133, Y:141
X: 135, Y:138
X: 138, Y:133
X: 141, Y:128
X: 146, Y:122
X: 151, Y:117
Event: released!
```
3. `tests/driver/touch_dev_gestures` of PR #19884 should work on top of this PR:
```
BOARD=stm32f429i-disco make -j8 -C tests/drivers/touch_dev_gestures flash
```
```
main(): This is RIOT! (Version: 2023.10-devel-128-g05f690-drivers/touch_dev_gestures_work)
Swipe right
Swipe left
Swipe down
Swipe up
Single Tap X: 246, Y:148
Single Tap X: 256, Y:139
Double Tap X: 247, Y:136
Pressed X: 246, Y:131
Moving X: 248, Y:132
Moving X: 250, Y:133
Moving X: 258, Y:135
Moving X: 270, Y:136
Moving X: 285, Y:132
Moving X: 300, Y:126
Moving X: 309, Y:122
Moving X: 310, Y:119
Released X: 310, Y:119
```
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
For continuous reporting of the touch position the FIFO threshold interrupt is used. This is necessary for example to implement gestures in interrupt mode. To activate the FIFO threshold interrupt and thus continuous reporting, the macro 'STMPE811_FIFO_THRESHOLD_ENABLED' must be set to 1. However, the driver only works reliably with FIFO threshold interrupts if the FIFO threshold value is at least 2. Otherwise the Touch Detect interrupt will not work correctly when a touch is released. Therefore, the FIFO threshold is set to 2 by default when `STMPE811_FIFO_THRESHOLD_ENABLED` is set. This default value can be overwritten by `STMPE811_FIFO_THRESHOLD`.
The FIFO queue has to be reset after reading one touch position. Otherwise new touch positions are processed with a delay if the rate of calling the function to read the FIFO is slower than the rate at which the FIFO is filled. The reason for this is that with each call of this function always only the oldest touch position is read value by value from the FIFO. Gestures, for example, can't be implemented with such a behavior
19880: drivers/ft5x06: fix initialization if callback function parameter is NULL r=aabadie a=gschorcht
### Contribution description
This PR fixes the `ft5x06` driver initialization if the callback function parameter `cb` is `NULL. This might be the case for example if the application uses the touch device in polling mode.
If the interrupt pin is initialized if the callback function parameter `cb` is `NULL`, the driver crashes the first time an interrupt is triggered. Therefore, the INT pin must be initialized only if also the callback function parameter `cb` is not `NULL`.
To be able to test the polling mode, this PR also includes a change of the `tests/drivers/ft5x06` application which introduces the environment variables `FT5X06_POLLING_MODE` `FT5X06_POLLING_PERIOD` and in the makefile.
### Testing procedure
1. Use any board with a FTXXXX touch device and test it in polling mode, for example:
```
FT5X06_POLLING_MODE=1 BOARD=stm32f746g-disco make -C tests/drivers/ft5x06 flash term
```
It should work as expected.
```
main(): This is RIOT! (Version: 2023.10-devel-119-g92a44a-drivers/ft5x06_fix_cb_null)
FT5x06 test application
+------------Initializing------------+
Initialization successful
1 touch detected
Touch 1 - X: 236, Y:111
Touch 1 - X: 236, Y:111
...
Touch 1 - X: 236, Y:111
Released!
```
2. Checkout master branch and cerry-pick commit 691a5e6308426ddc685e5a2c297238529211c258. The test application `tests/drivers/ft5x06` will crash once a touch event occur:
```
+------------Initializing------------+
Initialization successful
1 touch detected
Context before hardfault:
```
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
The interrupt mode has to be configured independent on whether the INT pin is initialized already by the `ft5x06_init` function if parameter `cb` is defined or later, for example by the `touch_dev` implementation.
19906: netdev/ieee802154_submac: support setting promiscuous mode option r=aabadie a=geonnave
### Contribution description
Found this was missing when trying to use `examples/sniffer` with the `nrf52840dk`. The solution was actually provided by `@benpicco` on the matrix channel.
### Testing procedure
Use the `examples/sniffer` following its README.
### Issues/PRs references
N/A.
Co-authored-by: Geovane Fedrecheski <geonnave@gmail.com>
To obtain coordinates from the touch panel that correspond to the display coordinates, it is often necessary to convert the coordinates from the touch display by swapping and mirroring. For the sake of simplicity, possible rotations are additionally defined.
If the INT pin is initialized if the callback function parameter `cb` is `NULL`, the driver crashes the first time an interrupt is triggered. Therefore, the INT pin must be initialized only if also the callback function parameter `cb` is not `NULL`.
19866: drivers/ft5x06: use a pointer to config parameters instead of copying them r=benpicco a=gschorcht
### Contribution description
There is no need to copy the configuration parameter set to the device descriptor. A const pointer to the configuration parameter set in ROM is sufficient. It saves 16 byte of RAM.
Includes PR #19860 for the moment to be compilable.
### Testing procedure
Use
```
CFLAGS='-DNDEBUG' BOARD=stm32f723e-disco make -j8 -C tests/drivers/touch_dev/
```
with and w/o this PR and compare the sizes.
Without the PR the sizes are:
```
text data bss dec
14652 136 2704 17492
```
With the PR the sizes are:
```
text data bss dec
14676 136 2688 17500
```
### Issues/PRs references
~Depends on PR #19860~
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19881: drivers/stmpe811: fix initialization if callback function parameter is NULL r=benpicco a=gschorcht
### Contribution description
This PR fixes the `stmpe811` driver initialization if the callback function parameter `cb` is `NULL. This might be the case for example if the application uses the touch device in polling mode.
If the interrupt pin is initialized if the callback function parameter `cb` is `NULL`, the driver crashes the first time an interrupt is triggered. Therefore, the INT pin must be initialized only if also the callback function parameter `cb` is not `NULL`.
To be able to test the polling mode, this PR also includes a change of the `tests/drivers/stmpe811` application which introduces the environment variables `STMPE811_POLLING_MODE` `STMPE811_POLLING_PERIOD` and in the makefile.
### Testing procedure
1. Use a `stm32f429i-disc1` board and test it in polling mode:
```
STMPE811_POLLING_MODE=1 BOARD=stm32f429i-disc1 make -C tests/drivers/stmpe811 flash term
```
It should work as expected.
```
main(): This is RIOT! (Version: 2023.10-devel-119-g26e7a-drivers/stmpe811_fix_cb_null)
STMPE811 test application
+------------Initializing------------+
Initialization successful
Pressed!
X: 113, Y:135
X: 113, Y:135
X: 113, Y:136
Released!
```
2. Checkout master branch and cerry-pick commit 691a5e6308426ddc685e5a2c297238529211c258. The test application `tests/drivers/stmpe811` will crash once a touch event occur:
```
main(): This is RIOT! (Version: 2023.10-devel-117-g91441)
STMPE811 test application
+------------Initializing------------+
Initialization successful
Stack pointer corrupted, reset to top of stack
FSR/FAR:
CFSR: 0x00020000
HFSR: 0x40000000
DFSR: 0x00000008
AFSR: 0x00000000
Misc
EXC_RET: 0xfffffff1
*** RIOT kernel panic:
HARD FAULT HANDLER
```
### Issues/PRs references
19892: pkg/tinydtls: allow to set buffer size from application again r=benpicco a=leandrolanzieri
### Contribution description
Currently the buffer size on tinydtls is set in its Makefile whenever `gcoap` module is present. This limits the ability of the user to override the value. This adds a pre-check of the `CFLAGS` to see if it was set before.
### Testing procedure
Try setting `CFLAGS += -DDTLS_MAX_BUF=<some_value>` on `examples/gcoap_dtls`, you should be able to override the default value without errors.
### Issues/PRs references
Reported in #19838
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
There is no need to copy the configuration parameter set to the device descriptor. A const pointer to the configuration parameter set in ROM is sufficient. It saves some 16 byte of RAM.
19539: drivers/periph_sdmmc: define a High-level SDIO/SD/MMC API and low-level SDMMC periperal driver interface r=benpicco a=gschorcht
### Contribution description
This PR provides a SDIO/SD/MMC Device API (SDMMC). It implements a SD host controller driver that provides a high-level functions using a low-level SDIO/SD/MMC peripheral driver for accessing
- MultiMediaCards (MMC) and Embedded MultiMediaCards (eMMC)
- SD Memory Cards (SD Cards) with Standard Capacity (SDSC), High Capacity (SDHC) or Extended Capacity (SDXC).
It supports:
- 1-bit, 4-bit and 8-bit data bus width
- Default Speed and High Speed
- Auto-CLK
The SDIO/SD/MMC device API (SDMMC) is divided into two parts:
1. The high-level API that implements the SD Host Controller driver and allows
- to inititialize and identify different types of cards,
- to access them either blockwise or bytewise,
- to get information about the used card, and
- to send single commands or application specific commands to the card.
2. The low-level SDIO/SD/MMC peripheral driver implements the low-level functions required by the high-level device API. It has to be implemented for each MCU.
### Limitations:
- Only one card per SDIO/SD/MMC device is supported.
- eMMCs specific features are not supported.
- UHS-I, UHS-II and UHS-III are not supported.
### Testing procedure
PR #19540, PR #19760 or PR #19786 is needed to test this PR.
### Issues/PRs references
Prerequisite for PR #19540
Prerequisite for PR #19760
Prerequisite for PR #19786
19815: cpu/sam0_common/periph/sdhc: busy waiting and clock fixes r=benpicco a=benpicco
19860: drivers/ft5x06: fix vendor ID for FT6xx6 and FTxxxx register addresses r=benpicco a=gschorcht
### Contribution description
This PR provides a fix of the vendor ID for FT6xx6 touch panel driver ICs and a fix of register addresses for FTxxxx.
According to the [Application Note for FT6x06 CTPM](https://cdn-shop.adafruit.com/datasheets/FT6x06_AN_public_ver0.1.3.pdf), the vendor ID of FT6x06 touch panel driver ICs is `0x11` instead of `0xcd`. Although there are no information found in the Web about the FT6x36, the FT6336U touch panel of a ESP32-S3 WT32 SC01 Plus is also working with `0x11` as vendor ID so that it seems that FT6x36 is also using `0x11` as vendor ID.
Figured out with a `stm32f723e-disco` board (revision D03). Without this PR, `tests/drivers/ft5x06` gives:
```
+------------Initializing------------+
[ft5x06] init: invalid vendor ID: '0x11' (expected: 0xcd)
[Error] Initialization failed
```
With this PR it works as expected.
```
+------------Initializing------------+
Initialization successful
main(): This is RIOT! (Version: 2023.10-devel-96-gbb9011-drivers/ft5x06_fix_vendor_id)
FT5x06 test application
+------------Initializing------------+
[ft5x06] init: configuring touchscreen interrupt
Initialization successful
1 touch detected
[ft5x06] read gesture_id '0x00'
Touch 1 - X: 151, Y:138
[ft5x06] read gesture_id '0x00'
```
Some background information found in the Web:
- According to the [STM32CubeF7](c20e6dd15b/Drivers/BSP/STM32F723E-Discovery/stm32f723e_discovery_ts.c (L24-L27)) the FRIDA LCD panel mounted on the `stm32f723e-disco` board either uses FT6x36 (prior revision D) or FT3x67 (revision D). However, the FT5x06 driver type for the card is defined as FT6x06, which does not seem correct: bb9011c3fb/boards/stm32f723e-disco/include/board.h (L59)
- According to the [STM32CubeF7](c20e6dd15b/Drivers/BSP/Components/ft6x06/ft6x06.h (L269-L270)), the vendor ID for FT6x36 should be `0xcd`. However, the FT6336U on ESP32-S3 WT32 SC01 Plus works with vendor ID `0x11`.
- The [Adafruit FT6206 library](95118cd983/Adafruit_FT6206.h (L28)) uses `0x11` as vendor id.
- The `stm32l496g-disco` board uses a FT6236 which has vendor ID `0xcd`.
So the information available on the web is confusing. Maybe, a better solution would be to accept `0x11` as well as `0xcd` as vendor ID for FT6xxx touch panels. Unfortunately, there are no documents available on the registers directly from FocalTech 😟 so it seems to be more speculation than knowledge.
### Testing procedure
### Issues/PRs references
19886: cpu/efm32: fix DAC configuration r=benpicco a=gschorcht
### Contribution description
The EFM32 MCU allows the reference voltage to be configured per DAC device, not per DAC channel. Also, the DAC reference voltage was defined in the configuration but not used anywhere.
At the moment we have only defined one board (`stwstk6220a`) that uses the DAC, so changing the configuration interface shouldn't be critical.
### Testing procedure
`tests/periph/dac` should still work for the `stwstk6220a`
```
BOARD=slwstk6220a make -j8 -C tests/periph/dac flash
```
I don't have a `stwstk6220a` board (EFM32 Series 0) so that I can't test it. I could only test it for the `sltb009a` board (EFM32 Series 1) with the change for VDAC in PR #19887.
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
There are new pseudomodules for this driver:
- atwinc15x0_static_connect: Should behave as before, by trying to connect to an AP
by specified WIFI_SSIS and WIFI_PASS
- atwinc15x0_dynamic_connect: takes connection request via NETOPT_CONNECT
and provides the connection result via callback
- atwinc15x0_dynamic_scan: takes network scan requests via NETOPT_SCAN
and provides the scan result as a sorted list via callback
If the INT pin is initialized if the callback function parameter `cb` is `NULL`, the driver crashes the first time an interrupt is triggered. Therefore, the INT pin must be initialized only if also the callback function parameter `cb` is not `NULL`.
Even if the interrupt pin is not initialized here because the callback function parameter `cb` is NULL, the device interrupts are configured here so that they will work when the interrupt pin is initialized later, as is the case when the Touch Device API is used, for example. Since the interrupt state is cleared on each read, this is not a problem even if the interrupt pin is not used at all.
