Leandro Lanzieri
c8fb88d2f0
gnrc/rpl: Move GNRC_RPL_DAO_DELAY_LONG to 'CONFIG_' namespace
2020-05-14 15:56:57 +02:00
Leandro Lanzieri
c162631aa3
gnrc/rpl: Move GNRC_RPL_DAO_ACK_DELAY to 'CONFIG_'
2020-05-14 15:56:57 +02:00
Leandro Lanzieri
df29a769ba
gnrc/rpl: Move GNRC_RPL_DAO_SEND_RETRIES to 'CONFIG_' namespace
2020-05-14 15:56:56 +02:00
Leandro Lanzieri
51939c3608
gnrc/rpl: Move GNRC_RPL_LIFETIME_UNIT to 'CONFIG_' namespace
2020-05-14 15:56:56 +02:00
Leandro Lanzieri
3b06b41fa9
gnrc/rpl: Move GNRC_RPL_DEFAULT_LIFETIME to 'CONFIG_' namespace
2020-05-14 15:56:56 +02:00
Leandro Lanzieri
c61b6bca38
gnrc/rpl: Move GNRC_RPL_DEFAULT_DIO_REDUNDANCY_CONSTANT to 'CONFIG_'
2020-05-14 15:56:55 +02:00
Leandro Lanzieri
f353ca8225
gnrc/rpl: Move GNRC_RPL_DEFAULT_DIO_INTERVAL_MIN to 'CONFIG_' namespace
2020-05-14 15:56:55 +02:00
Leandro Lanzieri
7216c21dbc
gnrc/rpl: Move GNRC_RPL_DEFAULT_DIO_INTERVAL_DOUBLINGS to 'CONFIG_'
2020-05-14 15:56:52 +02:00
Martine Lenders
a6fe69b0e8
Merge pull request #13740 from miri64/gnrc_ipv6_nib/fix/abr-add-pio-iface
...
gnrc_ipv6_nib: only add prefix of same interface to ABR
2020-05-12 15:43:45 +02:00
Martine Lenders
4e6df34576
gnrc_ipv6_nib: only add prefix of same interface to ABR
...
It doesn't make sense for an Authoritative Border Router to manage a
prefix that does not belong to the border router's downstream
interface.
2020-05-12 13:06:20 +02:00
José Alamos
089e0a2b44
Merge pull request #14048 from jue89/fix/gnrc_lorawan_abp
...
net/gnrc/netif/lorawan: fix ABP device activation
2020-05-11 11:34:59 +02:00
Juergen Fitschen
1eb3b596c4
net/gnrc/netif/lorawan: fixed ABP device activation
2020-05-09 20:16:29 +02:00
Juergen Fitschen
255c76ff35
net/gnrc/netif/lorawan: fixed deprecated NETOPT_LINK_CONNECTED
2020-05-09 20:11:16 +02:00
Leandro Lanzieri
2d1d13d452
Merge pull request #14028 from miri64/gnrc_pktdump/fix/opt-deps
...
gnrc_pktdump: fix dependencies
2020-05-08 08:53:31 +02:00
Martine Lenders
18bd56d2d9
Merge pull request #13979 from benpicco/net/gnrc/netif/6lo-frag_size
...
gnrc/netif: 6lo: use 16 bit for max_frag_size
2020-05-06 12:43:02 +02:00
8ffd34ddd0
Merge pull request #12776 from maribu/test_event_wait_timeout
...
tests/event_wait_timeout: Fix for 8bit platforms
2020-05-05 21:33:06 +02:00
Martine S. Lenders
a349748354
gnrc_pktdump: reorder switch-cases in accordance with enum order
2020-05-05 21:05:00 +02:00
Martine S. Lenders
d43384d238
gnrc_pktdump: remove some duplicate calls to od_hex_dump()
...
`od_hex_dump()` is called if `hdr_len < pkt->size` to print the rest
after `hdr_len` of `pkt`. So if we just leave `hdr_len = 0` instead of
calling `od_hex_dump()` for every other NETTYPE, we achieve the same
effect.
As it is more effective (and already done in some cases) to re-set
`hdr_len` when the header was printed, we initialize `hdr_len` first
with 0 now.
2020-05-05 21:05:00 +02:00
Martine S. Lenders
5414164119
gnrc_pktdump: use gnrc_nettype_% module where appropriate
2020-05-05 21:05:00 +02:00
Ken Bannister
595e8c631f
Merge pull request #13726 from benpicco/nanocoap-payload_helper
...
nanocoap: add payload helper functions
2020-05-03 08:56:30 -04:00
Benjamin Valentin
e5c20b143d
nanocoap: add coap_payload_put_char()
2020-05-01 13:58:22 +02:00
Benjamin Valentin
2751708341
nanocoap: add payload helper functions
...
This adds two functions `coap_payload_add()` and `coap_payload_advance()`.
- `coap_payload_add()` will add n bytes to the payload buffer and advance
payload pointer accordingly.
const char hello[] = "Hello CoAP!";
coap_payload_add(pkt, hello, sizeof(hello));
- `coap_payload_advance()` will advance the payload buffer after data
has been added to it.
int len = snprintf(pkt->payload, pkt->payload_len, "%s %s!", "Hello", "CoAP");
coap_payload_advance(pkt, len);
I considered adding an additional parameter to keep track of the total request size
(returned size from coap_opt_finish() incremented by each added payload fragment),
but decided against it to keep consistency with the existing API.
2020-05-01 13:58:22 +02:00
Benjamin Valentin
18651eb399
gnrc_netif: Use full L2-PDU as IPv6 MTU
...
If the L2-PDU is greater than IPV6_MIN_MTU, use that as the MTU instead.
2020-04-29 12:49:36 +02:00
Francisco
80b300289d
Merge pull request #13912 from benpicco/at86rf215-mr-qpsk
...
drivers/at86rf215: implement MR-O-QPSK
2020-04-29 12:44:00 +02:00
Benjamin Valentin
504d02038d
gnrc_netif: update PDU after changing PHY mode
2020-04-29 10:41:37 +02:00
Benjamin Valentin
fac35644d0
ieee802154: add definitions & config options for MR-O-QPSK
...
Define options for IEEE 802.15.4g MR-O-QPSK as well as shell commands
to set them via ifconfig.
2020-04-29 10:41:37 +02:00
Martine Lenders
633d0f486d
Merge pull request #13669 from bergzand/pr/netif/async_events
...
gnrc_netif: Add support for internal event loop
2020-04-28 13:03:39 +02:00
943450a567
Merge pull request #13959 from leandrolanzieri/pr/nanocoap/kconfig/add_type
...
nanocoap/kconfig: Explicitly define type of MODULE_NANOCOAP
2020-04-28 12:48:47 +02:00
Leandro Lanzieri
b91c8502dc
net/nanocoap/kconfig: Explicitly define type of MODULE_NANOCOAP
2020-04-27 10:06:01 +02:00
Martine S. Lenders
cb8a6c36b0
gnrc_ipv6_nib: 6ln: use interface-specific DR for address registration
...
With multiple 6LoWPAN interfaces the router for the given interface
—the one the triggering RA came over—should be used to register the
address with.
Co-Authored-By: Benjamin Valentin <benpicco@googlemail.com>
2020-04-25 01:20:55 +02:00
Martine S. Lenders
245c04f368
gnrc_ipv6_nib: internal: add capability to search DR by interface
...
Co-Authored-By: Benjamin Valentin <benpicco@googlemail.com>
2020-04-24 17:57:09 +02:00
Leandro Lanzieri
eeea9b7dae
net/coap: Expose configurations to Kconfig
2020-04-24 10:06:45 +02:00
Leandro Lanzieri
9e427e1584
net/coap: Move COAP_MAX_RETRANSMIT to 'CONFIG' namespace
...
COAP_MAX_RETRANSMIT is moved to the compile time configuration macro
namespace.
2020-04-24 10:06:43 +02:00
Leandro Lanzieri
afe4244ac9
net/coap: Move COAP_RANDOM_FACTOR_1000 to 'CONFIG' namespace
...
COAP_RANDOM_FACTOR_1000 is moved to the compile time configuration macro
namespace.
2020-04-24 10:06:43 +02:00
Leandro Lanzieri
072a0d8563
net/coap: Move COAP_ACK_TIMEOUT to 'CONFIG' namespace
...
COAP_ACK_TIMEOUT is moved to the compile time configuration macro
namespace.
2020-04-24 10:06:40 +02:00
Marian Buschsieweke
7b67e74bed
sys/net/gnrc: Use %lu to print times
2020-04-23 21:16:57 +02:00
Cenk Gündoğan
ea616abfda
nanocoap: allow coap_opt_add_string() for zero-terminated strings
2020-04-22 12:28:48 +02:00
Leandro Lanzieri
46507ff247
Merge pull request #13894 from kb2ma/gcoap/ping
...
net/gcoap: add CoAP ping request
2020-04-21 12:23:54 +02:00
Ken Bannister
cac350901f
Merge pull request #13893 from cgundogan/pr/nanocoap-get-opt-uint
...
nanocoap: export coap_opt_get_uint()
2020-04-18 10:00:27 -04:00
Martine Lenders
55a7010a0a
Merge pull request #13157 from nmeum/pr/fuzzing_tcp_only
...
Add AFL-based fuzzing setup for network modules
2020-04-18 10:54:14 +02:00
Cenk Gündoğan
6859de7855
nanocoap: export coap_opt_get_uint()
2020-04-17 22:39:44 +02:00
Sören Tempel
ac9c1f4a69
gnrc_tcp: disable checksum checks during fuzzing
2020-04-17 17:11:15 +02:00
Ken Bannister
6eae4ded84
net/gcoap: create CoAP ping request
2020-04-17 08:15:20 -04:00
Ken Bannister
f5a85e2aff
net/gcoap: handle CoAP ping request
2020-04-17 08:15:20 -04:00
Ken Bannister
2d3eb1a343
net/nanocoap: validate empty message length
2020-04-17 08:15:20 -04:00
Joakim Nohlgård
2013ac75f5
gnrc_netif: Add support for internal event loop
...
Enabled by the gnrc_netif_events pseudo module. Using an internal event
loop within the gnrc_netif thread eliminates the risk of lost interrupts
and lets ISR events always be handled before any send/receive requests
from other threads are processed.
The events in the event loop is also a potential hook for MAC layers and
other link layer modules which may need to inject and process events
before any external IPC messages are handled.
Co-Authored-By: Koen Zandberg <koen@bergzand.net>
2020-04-17 12:02:39 +02:00
Leandro Lanzieri
a06d9bbb66
Merge pull request #13315 from jia200x/pr/kconfig/ieee802154
...
ieee802154: Expose configurations to Kconfig
2020-04-08 19:34:55 +02:00
Jose Alamos
d33e44a85c
ieee802154: Expose configurations to Kconfig
2020-04-08 18:28:23 +02:00
14706d7423
Merge pull request #13243 from leandrolanzieri/pr/kconfig_migrate/net/nanocoap
...
net/nanocoap: Expose configurations to Kconfig
2020-04-08 10:51:54 +02:00
Benjamin Valentin
f198d689be
gnrc_dhcpv6_client: fix for SLIP link-layer
...
In a point-to-point serial connection, we don't have L2 addresses.
Set the link type & packet length accordingly and we will get a
prefix from KEA.
2020-04-07 22:08:57 +02:00