Hauke Petersen
59b3e0cedd
boards/nucleo: move shared code to common/nucleo
2017-11-30 10:26:36 +01:00
Hauke Petersen
00a365b956
boards/nucleo32: move shared code to common/nucleo32
2017-11-30 10:26:36 +01:00
Hauke Petersen
f1135af3d7
boards/nucleo144: move shared code to common/nucleo144
2017-11-30 10:26:35 +01:00
Hauke Petersen
050a1ddeab
boards/arduino-mkr: move shared code to common/arduino-mkr
2017-11-30 10:26:35 +01:00
Hauke Petersen
0f155db499
boards/arduino-atmega: move shared code to common/arduino-atmega
2017-11-30 10:26:35 +01:00
Hauke Petersen
eb2b9f2169
boards/iotlab: move shared code to common/iotlab
2017-11-30 10:26:35 +01:00
Hauke Petersen
6c118cfc0b
boards/msb-430: move shared code to common/msb-430
2017-11-30 10:26:35 +01:00
Hauke Petersen
b7943900fc
boards/msba2-based: move shared code to common/msba2
2017-11-30 10:26:35 +01:00
Hauke Petersen
4bcb353f89
boards/remote: move shared code to common/remote
2017-11-30 10:26:35 +01:00
Hauke Petersen
bd96d42ede
boards/wsn430: move shared code to common/wsn430
2017-11-30 10:26:35 +01:00
Martine Lenders
19d983be6d
Merge pull request #8170 from Teufelchen1/master
...
boards: bluepill: invert LED state
2017-11-29 20:16:01 +01:00
Bennet Blischke
c7270cf997
boards: bluepill: invert LED state
2017-11-29 17:13:05 +01:00
smlng
b283b7784c
make: fix various compile errors with Wextra
...
pkg, nordic_softdevice_ble: disable CFLAGS to omit compiler error
sys, pm_layered: fix casting nonscalar to the same type
cpu, stm32_common: fix type-limits, remove always true assert
cpu, stm32f4: fix pointer arithmetic in periph/i2c
drivers, at86rf2xx: fix type-limits where condition always true
saul, gpio: fix if no gpio configured for saul
cpu, saml21: add frequency check to periph/timer
driver, cc110x: fix unused param and type-limts errors
boards, wsn430-common: fix old-style-declaration
make: fix old style definition
drivers, sdcard_spi: fix old style typedef
driver, at30tse: remove unnecessary check
driver, nrf24: fix type-limit
driver, pn532: change buffer from char to uint8_t
tests/driver_sdcard: fix type limits
boards, feather-m0: add missing field inits
driver, tcs37727: fix type limits
pkg, emb6: disable some compiler warnings
tests/emb6: disable some compiler warings
pkg, openthread: fix sign compare and unused params
tests/trickle: fix struct init
tests/pthread_cooperation: fix type limits
board, mips-malta: remove feature periph_uart
shell: fix var size for netif command
gnrc, netif: fix sign-compare
gnrc, nib: fix sign-compare
shell: fix output in netif command
posix: fix type-limits in pthread_cond
2017-11-28 18:31:43 +01:00
Sören Tempel
eeebe934c4
bluepill: sort MCU peripherals alphabetically
2017-11-28 17:47:19 +01:00
neiljay
5ccfe68f1f
Merge pull request #8032 from cladmi/pr/cpu/mips_cleanup_modules
...
cpu/mips: make `mips32r2_common` only a common cpu and remove cpu/periph module duplicate names.
2017-11-28 13:34:30 +00:00
Martine Lenders
bf53c88a78
Merge pull request #7994 from smlng/make/fix/sign_compare
...
make: fix sign-compare errors
2017-11-28 12:29:44 +01:00
smlng
e381317fbf
make: fix sign-compare errors
...
cpu, nrf5x_common: fix sign-compare in periph/flashpage
drivers, periph_common: fix sign-compare in flashpage
cpu, sam0_common: fix sign-compare error in periph/gpio
cpu, cc2538: fix sign-compare in periph/timer
cpu, sam3: fix sign-compare in periph/gpio
cpu, stm32_common: fix sign-compare in periph/pwm
cpu, stm32_common: fix sign-compare in periph/timer
cpu, stm32_common: fix sign-compare in periph/flashpage
cpu, nrf5x_common: fix sign-compare in radio/nrfmin
cpu, samd21: fix sign-compare in periph/pwm
cpu, ezr32wg: fix sign-compare in periph/gpio
cpu, ezr32wg: fix sign-compare in periph/timer
drivers, ethos: fix sign-compare
sys, net: fix sign-compare
cpu, atmega_common: fix sign-compare error
cpu, msp430fxyz: fix sign-compare in periph/gpio
boards, msb-430-common: fix sign-compare in board_init
driver, cc2420: fix sign-compared
sys/net: fix sign-compare in gnrc_tftp
driver, pcd8544: fix sign-compare
driver, pn532: fix sign-compare
driver, sdcard_spi: fix sign-compare
tests: fix sign_compare
sys/net, lwmac: fix sign_compare
pkg, lwip: fix sign-compare
boards, waspmote: make CORECLOCK unsigned long to fix sign_compare error
tests, sock_ip: fix sign compare
tests, msg_avail: fix sign compare
tests, sock_udp: fix sign compare
boards: fix sign-compare for calliope and microbit matrix
2017-11-28 11:55:48 +01:00
Sebastian Meiling
4a828c63aa
Merge pull request #7955 from aabadie/pr/mpu9150_update
...
drivers/mpu9150: adapt to new parameters initialization scheme + provide saul adaption
2017-11-28 11:41:54 +01:00
8a6d04ce52
Merge pull request #7925 from RIOT-OS/gnrc_netif2_integration/master
...
gnrc_netif2: gnrc_ipv6_nib: full integration into GNRC
2017-11-27 21:12:14 +01:00
Martine Lenders
3659df8300
cc2538dk: add renode emulator as a provided feature
2017-11-24 18:48:58 +01:00
Martine Lenders
16e2829258
Merge pull request #7959 from antmicro/feature/renode-integration
...
makefiles: tools/renode: add support for Renode
2017-11-24 18:43:31 +01:00
Gaëtan Harter
062fbd85ce
cpu/mips32r2_generic: add new cpu that depends on mips32r2_common
...
Prepare to make `mips32r2_common` only a common cpu and not a standalone one.
2017-11-24 16:44:46 +01:00
Bas Stottelaar
c51948ce9c
boards: ikea-tradfri: add support for board.
2017-11-20 17:38:19 +01:00
kYc0o
f571814ded
boards: add rom boot offset for boards w/bootloader
2017-11-17 17:08:41 +01:00
Joakim Nohlgård
f4e9cad85a
boards: Separate boards from debug adapter configuration
2017-11-17 10:03:05 +01:00
smlng
5e7f0af450
boards, pba-d-01-kw2x: fix saul gpio init
2017-11-16 22:08:28 +01:00
Hauke Petersen
b3eb9b8cf2
boards: remove x86-multiboot-common
2017-11-16 10:35:05 +01:00
Hauke Petersen
99009af25e
boards: remove support for qemu-i386
2017-11-16 10:35:05 +01:00
Bas Stottelaar
a45d626354
boards: sltb001a: add support for thunderboard sense
2017-11-13 20:27:16 +01:00
Peter Kietzmann
89994604af
Merge pull request #7954 from smlng/cpu/atmega/adc
...
cpu, atmega_common: add periph/adc
2017-11-13 11:44:56 +01:00
f6d7e54228
Merge pull request #7739 from kYc0o/factorise_sam0_ldscripts
...
ld: refactor sam0 ldscripts
2017-11-13 11:36:25 +01:00
Laurent Navet
9de00af063
cpu/atmega_common: add adc driver
2017-11-10 14:19:08 +01:00
Joakim Nohlgård
925a908d95
kinetis: Update RNGA driver configuration to automatically detect the module
2017-11-10 10:43:00 +01:00
Joakim Nohlgård
22c52bd3a8
kinetis: Unify all Kinetis CPUs in one directory
2017-11-10 10:42:59 +01:00
bb4af7b66b
Merge pull request #7971 from haukepetersen/fix_msb430h_removeconfigfeature
...
boards: remove non-existent feature 'config'
2017-11-09 15:24:01 +01:00
39b6726186
Merge pull request #7979 from haukepetersen/rm_board_pca1000x
...
boards: removed support for pca1000[0|5]
2017-11-09 14:42:50 +01:00
Hauke Petersen
fef2a4e162
boards/nrf6310: fixed doc
2017-11-09 14:00:09 +01:00
Hauke Petersen
ea73cc49ea
boards: removed support for pca10005
2017-11-09 12:13:32 +01:00
Hauke Petersen
9447cb3034
boards: removed support for pca10000
2017-11-09 12:13:00 +01:00
Hauke Petersen
9c3ad1be94
boards/wsn430: removed empty 'drivers' dir
2017-11-09 09:56:27 +01:00
Hauke Petersen
abf5da085f
boards: remove non-existent feature 'config'
2017-11-09 09:50:21 +01:00
847c4da441
Merge pull request #7964 from haukepetersen/fix_nucleo_features
...
boards/nucleo: removed duplicate features
2017-11-08 17:52:30 +01:00
Hauke Petersen
0536ac16ec
boards/nucleo: removed duplicate flashpage feature
2017-11-08 17:43:18 +01:00
Hauke Petersen
8a9324d698
boards/nucleo: removed duplicate hwrng feature
2017-11-08 17:43:08 +01:00
Hauke Petersen
e116fd961f
boards/msp430-based: removed flashpage feature
...
This feature is already defined by the (common) CPU implementation,
so no need to re-define it for each board.
2017-11-08 17:09:18 +01:00
Hauke Petersen
69fdbcfec6
boards/nucleo: removed duplicate cpuid feature
2017-11-08 16:59:41 +01:00
509ad6e4df
Merge pull request #7815 from Marc-Aurele/adc_l0
...
cpu/stm32l0 : implementation of ADC driver
2017-11-08 15:11:21 +01:00
Aurelien Fillau
9825245938
boards/nucleo-l073: add ADC configuration
...
ADC configuration added for nucleo-l073 board
Signed-off-by: Aurelien Fillau <aurelien.fillau@gmail.com>
2017-11-08 14:29:58 +01:00
Aurelien Fillau
9907908b2a
cpu/stm32l0: add ADC driver implementation
...
Now, ADC is available on stm32l0 family. A calibration is
done at each new adc_sample. Moreover, when conversion is done,
VREFINT and temperature sensor are dactivated to save power.
Signed-off-by: Aurelien Fillau <aurelien.fillau@gmail.com>
2017-11-08 14:29:42 +01:00
Piotr Zierhoffer
0ca4f4252a
boards: cc2538dk: add Renode test script
2017-11-08 12:43:16 +01:00
a860cb74f0
boards/msbiot: adapt board config for mpu9150 to new params scheme
2017-11-08 09:09:21 +01:00
Martine Lenders
861035f22d
gnrc: integrate gnrc_netif2
...
Not link-able, since NDP and NC are missing (intentionally)
2017-11-07 19:08:44 +01:00
kYc0o
a7a41ad781
boards: add rom boot offset for boards w/bootloader
2017-11-07 15:06:40 +01:00
Joakim Nohlgård
00a0740fcc
kinetis: Add support for LPUART module in parallel with UART module
...
A dispatcher function is implemented for directing writes to the correct
function. The dispatcher is bypassed completely if the CPU only contain
one kind of UART module.
There are at least two different UART hardware modules deployed in
different Kinetis CPU families (or possibly three or more when counting
variations of the UART module). The UART module is an older 8 bit module
with advanced functionality, while the LPUART is a 32 bit module with
focus on low power consumption.
- The older families in the K series all have UART modules.
- The K22F family have both UART and LPUART modules in the same CPU.
- Older L series (e.g. KL25Z) have two variations of the UART module
- Newer L series (e.g. KL43Z) have LPUART modules, and sometimes
UART as well.
- Newer W series (KW41Z) have only LPUART
2017-11-07 14:19:42 +01:00
443c8e39ed
cpu: kinetis: make periph_rtc depend on periph_rtt
2017-11-06 12:01:19 +01:00
172c9e8066
boards: mulle: always select periph_rtt
2017-11-06 12:01:19 +01:00
337e9d80f2
boards/feather-m0: initial support
2017-11-05 22:19:07 +01:00
Cenk Gündoğan
1ea1fe9060
Merge pull request #7928 from smlng/board/bluepill/dfu
...
bluepill: dfu-util support
2017-11-03 13:22:40 +01:00
ae51dc55d0
boards: adapt to reorganized CPU Makefile.features
2017-11-02 12:59:46 +01:00
smlng
f0ef22232b
bluepill: dfu-util support
2017-11-01 23:32:31 +01:00
Francisco Acosta
ba2e55bc93
Merge pull request #7436 from gebart/pr/mulle-rtt-config
...
mulle: Update RTT config to match other Kinetis boards
2017-10-31 15:38:14 +01:00
Joakim Nohlgård
5a85e28817
frdm-k22f: Correct copy pasta in LEDx macros
2017-10-28 13:56:04 +02:00
Sebastian Meiling
2e0917cd81
Merge pull request #7727 from beduino-project/bluepill-rebased
...
boards: add support for bluepill board
2017-10-27 20:33:07 +02:00
Sören Tempel
9b3714b0c4
add support for bluepill board
2017-10-27 16:06:50 +02:00
danpetry
20909b7f95
Removed the offending comma.
2017-10-26 12:10:24 +02:00
Hauke Petersen
ce75edc7c1
Merge pull request #7759 from haukepetersen/opt_calliope_saulinverted
...
board/calliope: add inverse flag to SAUL gpio conf
2017-10-24 13:58:30 +02:00
167bd30453
all: fix my email address
2017-10-20 15:02:41 +02:00
Francisco Acosta
d1f128e245
Merge pull request #7685 from gebart/pr/openocd-refactor
...
openocd: Refactor openocd.sh script
2017-10-18 17:22:39 +02:00
Joakim Nohlgård
887ddcec69
mulle: Update flash verify script to use ELF version
2017-10-18 14:34:20 +02:00
Joakim Nohlgård
7713bede99
openocd: Refactor openocd.sh script
...
- Merge flash and flash-elf commands since they were identical except
for the file name of the image
- Split GDB command from DBG environment variable to allow more easily
configure front-ends for GDB via environment variables.
- Remove verbose tests of empty variables and replace by `: ${VAR:=default}`
- Remove passed command line arguments to sub-functions, they were
unused in the functions anyway.
- Remove TUI variable, use `export DBG_EXTRA_FLAGS=-tui` to get the same
result.
2017-10-18 14:34:20 +02:00
Hauke Petersen
66fb7e5c11
board/calliope: add inverse flag to SAUL gpio conf
2017-10-18 14:14:53 +02:00
Semjon Kerner
8474c524af
boards/calliope: add description to mention the revision
2017-10-18 11:30:14 +02:00
Semjon Kerner
f8c28f4c8c
boards/calliope: adapted pins for rev 1.0
2017-10-18 11:30:14 +02:00
Hauke Petersen
0a114d87f1
boards/z1: fixed LEDx_PIN definitions
2017-10-16 11:01:45 +02:00
Sebastian Meiling
c0a4f4de68
Merge pull request #7732 from smlng/board/xtimer_width
...
boards: add missing XTIMER_WIDTH
2017-10-13 20:33:03 +02:00
e5db719fad
boards/sodaq-explorer: initial support
2017-10-13 17:24:46 +02:00
smlng
25378c7dd5
boards: add missing XTIMER_WIDTH
2017-10-13 10:53:11 +02:00
Joakim Nohlgård
329517f08d
boards: Remove executable bit on various non-executable files
2017-10-13 10:29:34 +02:00
Kees Bakker
a84bacc662
boards/sodaq-autonomo: correct TX pin of uart2
2017-10-12 21:43:19 +02:00
Joakim Nohlgård
7c1c6ac282
Merge pull request #7646 from aabadie/samd21_bootloader
...
cpu/sam0-common: rename mkr ldscript to more a generic name
2017-10-10 19:39:48 +02:00
Martine Lenders
72edaa3e47
Merge pull request #7586 from cladmi/pr/saul/gpio
...
saul/gpio: Low footprint handling of active-low signals + state initialization
2017-10-10 18:49:02 +02:00
282f691871
boards/arduino-mkr-common: rename CPU to use new ldscript name
2017-10-07 23:07:16 +02:00
Francisco Acosta
ae3beb613e
Merge pull request #7673 from gebart/pr/mulle-flash-bank
...
mulle: Remove second flash bank declaration from OpenOCD configuration
2017-10-06 18:11:51 +02:00
Andreas "Paul" Pauli
69476a7a6f
Merge pull request #7624 from smlng/boards/cc2650_launchpad
...
boards: initial support for TI CC2650 LaunchPad
2017-10-05 17:26:06 +02:00
Gaëtan Harter
05402dea29
samr21-xpro/gpio: set LED/BUTTON gpios as inverted
...
This makes LED go off when set to 0 and button reads 1 when pressed.
2017-10-05 17:19:57 +02:00
4a5b9b592d
Merge pull request #6702 from smlng/xtimer/refine_macros
...
xtimer: refine config macros
2017-10-05 13:43:47 +02:00
Joakim Nohlgård
4ee2e0c82b
mulle: Remove second flash bank declaration from OpenOCD configuration
...
This is no longer required and causes problems with modern OpenOCD which
will automatically add all flash banks when probing Kinetis CPUs.
2017-10-05 12:33:37 +02:00
Hauke Petersen
1a3fefb6bf
cpu/sam3: uart driver enhancements
...
- enabled driver to run in TX only mode
- make use of gpio_init_mux() for pin intialization
- simplyfied pin configuration
- adapted pin configuartion for arduino-due and udoo
2017-10-04 12:42:38 +02:00
Dan Evans
531e6f5008
sam0:usart - wake from sleep on receive line
2017-09-25 12:47:31 -06:00
56fa737d83
boards: makefiles indentation cleanup
2017-09-22 14:53:01 +02:00
smlng
b012cdb8ad
xtimer: refine config macros
...
- auto set XTIMER_SHIFT relative to XTIMER_HZ
- refine setting of XTIMER_WIDTH
2017-09-20 16:48:38 +02:00
Sebastian Meiling
307786973e
Merge pull request #7613 from jonajames/feature/sam3_pio_toggle_issue
...
SAM3: macro LED0_TOGGLE not working
2017-09-20 14:11:45 +02:00
jonajames
1fcfb7b637
boards: fix LED0_TOGGLE for SAM3 based boards
2017-09-20 13:34:58 +02:00
Nicholas Jackson
18e90fe410
boards: initial support for TI CC2650 LaunchPad
2017-09-20 10:38:17 +02:00
lebrush
81bfb0c97a
Merge pull request #7594 from lebrush/fix/atmega-context-switch
...
boards/arduino-atmega-common: use PD7 for ctx operations
2017-09-18 15:09:46 +02:00
Francisco Acosta
3bee2c0f82
Merge pull request #7601 from roberthartung/cpu_atmega_fix_prr
...
cpu/atmega: use power.h defines instead of direct register access
2017-09-14 14:18:32 +02:00
Robert Hartung
914025973d
cpu/atmega: use power.h defines instead of direct register access
2017-09-14 14:04:14 +02:00
02e055fc81
make: include cpu Makefile.features from board Makefile.features
2017-09-14 13:15:52 +02:00
Victor Arino
94624c2b8b
boards/arduino-atmega-common: use PD7 for ctx operations
...
This was previously configured to PC5 which is shared with the i2c
SCL line. PD7 is selected since it's the only pin which does not
have an additional function.
2017-09-12 22:02:06 +02:00
neiljay
23f4f9be73
Merge pull request #7386 from francois-berder/pic32-periph-rng
...
Wi-Fire: Add hardware RNG peripheral support
2017-09-08 10:42:36 +01:00
