9b9ed236ba
Merge pull request #14916 from MrKevinWeiss/pr/slwstk6220a
...
drivers/periph: Remove UART from device_enums.h
2020-09-09 10:53:27 +02:00
fdaf7fd822
Merge pull request #14596 from benpicco/drivers/at86rf2xx-retries
...
drivers/at86rf2xx: support frame retry reporting on AT86RFR2
2020-09-09 10:27:05 +02:00
MrKevinWeiss
bdeb39576e
drivers/periph: Remove UART from dev_enums.h
2020-09-09 10:25:38 +02:00
Benjamin Valentin
0871b69c84
drivers/at86rf2xx: support frame retry reporting on at86rfr2
...
At86rfr2 doesn't report retries directly, but it can generate a TX start
interrupt for each (re)try, so we can count manually.
2020-09-08 14:48:57 +02:00
Benjamin Valentin
634714ff78
drivers/at86rf215: implement Reduced Power Consumption
...
Reduced Power Consumption is available for MR-O-QPSK and
MR-FSK.
In this mode the receiver will be turned off periodically,
defaulting to a 50% duty cycle.
This reduces power consumption when in IDLE RX by almost 50%
and is therefore enabled by default.
2020-09-07 13:48:47 +02:00
Francisco
6f84870c26
Merge pull request #14634 from benpicco/eui_provider
...
net/link_layer: implement EUI provider
2020-09-01 16:26:08 +02:00
benpicco
6f271b7d3e
Merge pull request #14903 from benpicco/drivers/include/periph/rtc-fix
...
drivers/periph_common: RTC: fix doxygen
2020-09-01 15:15:55 +02:00
Benjamin Valentin
bd57640d5b
drivers/periph_common: RTC: fix doxygen
2020-08-31 14:16:42 +02:00
Gunar Schorcht
147b79169c
drivers/periph/gpio: add comparison functions
...
The expandable GPIO API requires the comparison of structured GPIO types. This means that inline functions must be used instead of direct comparisons. For the migration process, drivers and other modules must first be changed so that they use the inline comparison functions.
2020-08-31 13:10:28 +02:00
Benjamin Valentin
3e8d6388f8
netdev_ieee802154: use eui_provider in netdev_ieee802154_setup()
2020-08-30 23:43:57 +02:00
benpicco
a0bae383d7
Merge pull request #14818 from Nishchay-sopho/drivers/sps30/add_sleep_mode
...
drivers/sps30: Add sleep mode
2020-08-25 23:49:32 +02:00
Nishchay-sopho
a368b0bc36
drivers/sps30: Add sleep mode
2020-08-25 16:20:18 +02:00
9b2aa40e03
Merge pull request #14038 from benpicco/mtd_pagewise
...
mtd: add page addressed operations to allow access > 4GiB on SD cards
2020-08-25 13:10:20 +02:00
Marian Buschsieweke
92ae260617
Merge pull request #14778 from benpicco/sys/luid_netdev
...
sys/luid: add luid_netdev_get_eui48() & luid_netdev_get_eui64()
2020-08-21 21:30:14 +02:00
Benjamin Valentin
d29397cfd8
netdev_ieee802154: add netdev_ieee802154_setup()
2020-08-21 15:33:19 +02:00
6199ada6b5
drivers/sx127x: migrate to ztimer
2020-08-20 13:41:32 +02:00
Benjamin Valentin
02f37b998a
drivers/at24cxxx: export page-wise write function
...
Export the _write_page() function so it can be used by the MTD subsystem.
2020-08-18 17:25:40 +02:00
Benjamin Valentin
7c8fe862ce
drivers/at25xxx: export page-wise write function
...
Export the _write_page() function so it can be used by the MTD subsystem.
2020-08-18 17:25:40 +02:00
Benjamin Valentin
4034f96169
mtd: add page addressed operations
...
Currently read(), write() and erase() all use 32 bit addressing.
This is a problem when writing to media > 4 GiB, e.g. SD cards.
The current implementation would wrap around after 4 GiB and corrupt data.
To avoid this, add functions to the MTD subsystem that allow for page-wise
addressing. This is how most of the underling storage drivers and the
file-systems above work anyway.
In the future we should then deprecate the 32-bit functions if all drivers
are converted.
2020-08-18 17:25:39 +02:00
Benjamin Valentin
1582b105d3
drivers/at86rf2xx: fix typo
2020-08-17 22:53:51 +02:00
Benjamin Valentin
decadc41a0
drivers/dose: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
4f19b54b7b
drivers/at86rf215: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
53eedc283b
drivers/at86rf2xx: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
7ceb3f0a68
netdev: add netdev_register() to keep track if netdev IDs
...
It is desireable to have a way to identify network devices.
This should be independent from the type of netdev, so a common identifier is needed.
Base this on the driver ID and the index in the configuration struct.
This way we achive unique IDs that stay consistent for any firmware flashed on a board.
2020-08-17 22:50:18 +02:00
Nishchay-sopho
3245dee8d8
drivers/sps30: Update units of measurement
2020-08-12 12:50:35 +02:00
Francisco
ad3568be87
Merge pull request #14712 from benpicco/gpio_init_int-clarify
...
periph/gpio: clarify behavior of gpio_irq_enable()
2020-08-11 11:30:05 +02:00
Benjamin Valentin
7543e714c1
drivers/periph_common: RTC: move RIOT_EPOCH to header, document it.
2020-08-07 13:22:19 +02:00
Benjamin Valentin
8c95198cbb
periph/gpio: clarify behavior of gpio_irq_enable()
...
What happens with events that occured after `gpio_irq_disable()` is
currently not defined.
If they are not cleared, they will generate an interrupt on `gpio_irq_enable()`.
This does not seem like the intended behavior, so make the documentation more
explicit.
2020-08-05 17:41:27 +02:00
José Alamos
7967066f51
Merge pull request #14657 from maribu/netdev_doc
...
drivers/net: Fix netdev_driver_t doc
2020-08-04 10:49:24 +02:00
Benjamin Valentin
aa0e5e7afa
drivers/cc110x: replace binary constants and use unsigned char
...
binary constants are a GCC extension
2020-07-31 13:38:03 +02:00
Benjamin Valentin
2e34298265
drivers/nrf24l01p: use unsigned char
2020-07-31 13:38:03 +02:00
Marian Buschsieweke
86513dc97a
drivers/net: Fix netdev_driver_t doc
...
- Fix indent
- Use @reval instead of @return when referring to a single return value
- Use term "frame" instead of "packet"
2020-07-30 20:22:17 +02:00
4b4e9830b0
drivers/touch_dev: clarify touch position coordinates origin
2020-07-29 14:49:17 +02:00
388bbfa008
drivers: add generic screen wrapper around display and touch devices
2020-07-29 14:30:03 +02:00
benpicco
7acdecb1df
Merge pull request #14447 from Nishchay-sopho/drivers/scd30
...
driver/scd30 : Add driver for scd30 sensor
2020-07-28 12:41:58 +02:00
benpicco
ecab75b529
Merge pull request #13632 from benpicco/cpu/sam0_common/uart-deinit
...
drivers/periph/uart: add periph_uart_reconfigure feature & implementation for sam0
2020-07-28 11:12:19 +02:00
nagrawal
900e4b61dc
driver/scd30: Add driver for Sensirion SCD30
...
Created tests for Sensirion scd30 driver
Moved Makefile.dep and Makefile.include as per new spec
2020-07-28 10:38:01 +02:00
Benjamin Valentin
3eb54179ae
drivers/periph/uart: add periph_uart_reconfigure feature
2020-07-28 10:10:15 +02:00
Benjamin Valentin
7af8a3e2d3
drivers/periph/timer: add note about TIM_FLAG_RESET_ON_MATCH
2020-07-27 17:17:08 +02:00
Francisco
d187e83221
Merge pull request #14570 from fjmolinas/pr_fix_mock_rtt_defs
...
drivers/rtt: override RTT_MAX_VALUE and RTT_FREQUENCY for mock
2020-07-22 16:33:29 +02:00
Francisco Molina
9dde6ec53d
drivers/rtt: overrite RTT_MAX_VALUE and RTT_FREQUENCY for mock
...
mock_rtt relies on setting mock values for RTT_MAX_VALUE and
RTT_FREQUENCY. Platforms with a rtt will already define these
values which leads to mock_rtt working with different values than
rtt_rtc.
This commit changes the ifdef logic so that when using mock_rtt
RTT_MAX_VALUE and RTT_FREQUENCY are redefined.
2020-07-22 08:52:54 +02:00
Akshai M
60170971bd
net/l2filter : Update documentation
2020-07-22 00:26:09 +05:30
Akshai M
caab4cd8c5
net/l2filter : Move 'L2FILTER_LISTSIZE' to 'CONFIG_'
2020-07-22 00:26:09 +05:30
Hendrik van Essen
9d068d582a
drivers/pca9633: make enum anonymous
2020-07-17 15:05:32 +02:00
Benjamin Valentin
b080d3da7a
drivers/soft_uart: implement inverted TX & RX
...
In the current implementation, RX is flank based, so it's entirely level
agnostic.
I still chose to include a SOFT_UART_FLAG_INVERT_RX flag for symmetry and
to allow for a possible future, sampling based implementation.
2020-07-14 23:04:36 +02:00
Benjamin Valentin
96c67b0fa5
drivers/soft_uart: add software based UART implementation
2020-07-14 22:51:59 +02:00
Francisco
325b7a8d8e
Merge pull request #13631 from benpicco/cpu/sam0_common/spi-deinit
...
drivers/periph/spi: add periph_spi_reconfigure feature & implementation for sam0
2020-06-30 15:34:53 +02:00
Leandro Lanzieri
955efd85ff
drivers/at: Add at_urc_isr module to process URCs upon arrival
2020-06-30 11:41:13 +02:00
benpicco
a92dac5701
Merge pull request #14329 from Nishchay-sopho/drivers/sdp3x
...
driver/sdp3x : Add driver for sdp3x sensor
2020-06-29 21:16:39 +02:00
Dirk Ehmen
05980765f2
drivers/sdp3x: Driver for sensirion sdp3x sensor
2020-06-29 20:50:41 +02:00
