Benjamin Valentin
c1eead925d
drivers/slipdev: register with netdev
2021-06-21 12:42:03 +02:00
Benjamin Valentin
2467c84634
drivers/ethos: enable multiple instances
2021-06-11 12:31:37 +02:00
Benjamin Valentin
d611a264fd
drivers/cc2420: register with netdev
2021-04-27 17:37:52 +02:00
efdaf9225f
sys/net/gnrc: disable sx126x auto init with loramac
2021-03-30 19:03:34 +02:00
bede0cd98c
sys/net/auto_init: add sx126x auto_init logic
2021-03-30 16:12:40 +02:00
Benjamin Valentin
d8918c24fa
socket_zep: register with netdev
2021-01-25 22:59:01 +01:00
Fabian Hüßler
7d618afa17
nrf24l01p_ng: make use of netdev_register()
2021-01-24 20:49:39 +01:00
fabian18
f7a77ebb04
drivers/nrf24l01p_ng: netdev driver for nrf24l01+
...
The driver uses the netdev interface. Due to the limited
capabilities of the transceiver (32 byte FIFO and no source address in the layer2 frame),
it relies on 6LowPAN compression and adds the source address to the frame for that.
2021-01-24 20:49:39 +01:00
dylad
5b7961b747
sys/net: add sam0 eth auto init
2020-12-13 22:01:50 +01:00
Fabian Hüßler
7b5391b7ce
sys/net/gnrc/netif/init_devs: IEEE802154_STACKSIZE_DEFAULT
2020-12-04 09:40:55 +01:00
Fabian Hüßler
c526a34770
sx127x: make use of netdev_register()
...
Call netdev_register() in sx127x_setup()
and pass the index in auto_init_sx127x()
and semtech_loramac_init()
2020-12-01 16:34:11 +01:00
Fabian Hüßler
39adf908ce
cc110x: make use of netdev_register()
...
Call netdev_register() in cc110x_setup()
and pass the index in auto_init_cc110x()
2020-12-01 12:11:20 +01:00
benpicco
e77d12da26
Merge pull request #15188 from benpicco/drivers/kw41zrf-register
...
drivers/kw41zrf: register with netdev
2020-10-31 14:30:00 +01:00
68d3f2ee6c
sys/net: remove nordic softdevice specific handling
2020-10-29 09:02:12 +01:00
José Alamos
60b5a6b35e
Merge pull request #15268 from benpicco/gnrc_netif_ieee802154_create-const
...
drivers/at86rf215: give driver threads different names
2020-10-23 17:14:19 +02:00
Bas Stottelaar
1b35d06a51
sys/*: realign ENABLE_DEBUG
2020-10-23 11:27:48 +02:00
Bas Stottelaar
80d9da90df
sys/*: add missing include of assert.h
2020-10-22 11:13:09 +02:00
Benjamin Valentin
eb3daf4c22
drivers/at86rf215: give driver threads different names
...
Use different names for the sub-GHz and 2.4 GHz driver thread to make
it easier to tell which is which.
```
2020-10-21 19:53:50,608 # pid | name | state Q | pri | stack ( used) ( free) | base addr | current
2020-10-21 19:53:50,622 # - | isr_stack | - - | - | 512 ( 232) ( 280) | 0x20000000 | 0x200001c8
2020-10-21 19:53:50,623 # 1 | main | running Q | 7 | 1536 ( 660) ( 876) | 0x200002f8 | 0x2000075c
2020-10-21 19:53:50,639 # 2 | pktdump | bl rx _ | 6 | 1536 ( 236) ( 1300) | 0x200035a8 | 0x20003abc
2020-10-21 19:53:50,653 # 3 | 6lo | bl rx _ | 3 | 1024 ( 332) ( 692) | 0x2000420c | 0x2000450c
2020-10-21 19:53:50,655 # 4 | ipv6 | bl rx _ | 4 | 1024 ( 376) ( 648) | 0x200009d4 | 0x20000cd4
2020-10-21 19:53:50,670 # 5 | udp | bl rx _ | 5 | 1024 ( 252) ( 772) | 0x200049f0 | 0x20004cf4
2020-10-21 19:53:50,672 # 6 | at86rf215 [sub GHz] | bl rx _ | 2 | 1024 ( 536) ( 488) | 0x20001200 | 0x200014c4
2020-10-21 19:53:50,687 # 7 | at86rf215 [2.4 GHz] | bl rx _ | 2 | 1024 ( 536) ( 488) | 0x20001600 | 0x200018c4
2020-10-21 19:53:50,689 # | SUM | | | 8704 ( 3160) ( 5544)
```
2020-10-21 19:59:42 +02:00
Jose Alamos
46600adf22
nrf802154: unify auto_init for HAL and netdev
2020-10-19 15:18:35 +02:00
Jose Alamos
c1a9d352f3
cc2538_rf: unify auto_init for HAL and netdev
2020-10-19 15:18:34 +02:00
Benjamin Valentin
b32bc3dbd1
drivers/kw41zrf: register with netdev
2020-10-08 16:19:23 +02:00
Benjamin Valentin
1afe72a5e5
drivers/enc28j60: register with netdev
2020-10-08 10:36:56 +02:00
Benjamin Valentin
988ee1648f
drivers/mrf24j40: register with netdev
2020-10-07 16:39:39 +02:00
Jose Alamos
9ebc3f8bd8
auto_init/nrf52840: add support for SubMAC
2020-10-01 10:55:55 +02:00
Jose Alamos
1de5b34adf
auto_init/cc2538_rf: add support for SubMAC
2020-10-01 10:55:55 +02:00
Benjamin Valentin
decadc41a0
drivers/dose: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
4f19b54b7b
drivers/at86rf215: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
53eedc283b
drivers/at86rf2xx: register driver with netdev
2020-08-17 22:53:51 +02:00
Gunar Schorcht
b51ac69d0a
sys/net/gnrc: add netif support for ATWINC15x0 netdef driver
2020-06-26 12:33:38 +02:00
Leandro Lanzieri
05962fe3ef
gnrc/netif: Configure queue size with exponent
...
This changes the configuration macro to be the exponent of 2^n, as the
message queue size needs to be always power of 2.
2020-06-15 07:30:52 +02:00
821eb5bc76
sys/net/auto_init: remove useless preprocessor directives
...
The files are now built only when the corresponding module is used
2020-06-08 11:10:39 +02:00
29c5c54fe2
sys/net/auto_init: only build files when related module is used
2020-06-08 11:10:22 +02:00
3fe35e755c
sys/net/auto_init: rename cdcecm source file
...
Use a name that corresponds to the related module name
2020-06-08 10:27:35 +02:00
Martine S. Lenders
0d2f0a5ba4
gnrc_netif: fix gnrc_netif_lorawan dependencies
2020-05-19 16:10:58 +02:00
Jose Alamos
e451570219
gnrc_netif: remove GNRC_NETIF_NUMOF macro
2020-03-26 11:12:23 +01:00
Jose Alamos
67ed9defbe
gnrc_netif_xxx_create: use external netif allocation
2020-03-26 11:12:23 +01:00
Francisco
cdbf0b2d69
Merge pull request #13583 from benpicco/at86rf215-minimal
...
drivers/at86rf215: add basic support for AT86RF215 dual-band radio
2020-03-20 09:33:50 +01:00
Joakim Nohlgård
5bd67d88a8
drivers/kw41zrf: Transceiver driver for the KW41Z radio
...
This is the radio found in NXP Kinetis KW41Z, KW21Z. Only 802.15.4 mode
is implemented (KW41Z also supports BLE on the same transceiver).
The driver uses vendor supplied initialization code for the low level
XCVR hardware, these files were imported from KSDK 2.2.0 (framework_5.3.5)
2020-03-19 17:00:04 -05:00
Benjamin Valentin
d35511bee7
drivers/at86rf215: Add basic driver for the AT86RF215 radio
...
This adds a driver for the SPI based AT86RF215 transceiver.
The chip supports the IEEE Std 802.15.4-2015 and IEEE Std 802.15.4g-2012 standard.
This driver supports two versions of the chip:
- AT86RF215: dual sub-GHz & 2.4 GHz radio & baseband
- AT86RF215M: sub-GHz radio & baseband only
Both radios support the following PHY modes:
- MR-FSK
- MR-OFDM
- MR-O-QPKS
- O-QPSK (legacy)
The driver currently only implements support for legacy O-QPSK.
To use both interfaces, add
GNRC_NETIF_NUMOF := 2
to your Makefile.
The transceiver is able to send frames of up to 2047 bytes according to
IEEE 802.15.4g-2012 when operating in non-legacy mode.
Known issues:
- [ ] dBm setting values are bogus
- [ ] Channel spacing for sub-GHz MR-O-QPSK might be wrong
- [ ] TX/RX stress test will lock up the driver on openmote-b
2020-03-19 14:39:18 +01:00
Benjamin Valentin
d765098d72
sys/auto_init: allow delayed initialisation of gnrc_netif
...
Co-authored-by: Martine S. Lenders <m.lenders@fu-berlin.de>
2020-03-04 16:13:40 +01:00
