This commit adds usbdev, a common API to interface USB peripheral
devices. The API is split into two parts, one for the USB device itself
and one for the USB endpoint.
Add a rule to build `lpc2k_pgm` when flashing.
It is only compiled if it is using the one in `tools`.
If overwritten to `lpc2k_pgm` if it should be taken from the path,
it is not compiled.
The compilation is still done in `boards/common/msba2/tools` as it was
the case before and this commit does not address this.
Added arduino-nano to BOARD_INSUFFICIENT_MEMORY/BOARD_BLACKLIST following suit
of how arduino-uno is marked, as arduino-nano is mostly an Uno in a different
form factor.
Added arduino-nano to BOARD_INSUFFICIENT_MEMORY/BOARD_BLACKLIST following suit
of how arduino-uno is marked, as arduino-nano is mostly an Uno in a different
form factor.
The Arduino Nano board is the cheapest member of the Arduino family and used the
same MCU as the Arduino Uno. It differs in the form factor (the Nano is much
smaller), it uses an integrated FT232RL TTL adapter instead of an ATmega16u2 to
provide access to the serial console via USB, and it uses a different
bootloader (which occupies 2 KiB of the 32 KiB flash instead of 0.5 KiB occupied
on the Arduino Uno). This commit mostly copy pastes code from the Arduino Uno.
Linkerscript for `nrf52dk` has been updated to use `cortexm.ld` so does
not need the configuration anymore for the removed
`cpu/nrf52/ldscripts/nrf52832xxaa.ld`.
Not only does this leave open a risk to crash the node for the check
in `_compressible()` but also is the `tmp` check below getting confused
when `ptr` is `NULL`, since `gnrc_pktbuf_start_write()` returns `NULL`
in that case.
Size 0 snips are legal packet snips (empty payload e.g.) so it doesn't
make sense to issue an error in the write-protection in that case.
API documentation doesn't mention it either and the tests still pass
with the check removed.
Size 0 snips are legal packet snips (empty payload e.g.) so it doesn't
make sense to issue an error in the write-protection in that case.
API documentation doesn't mention it either and the tests still pass
with the check removed.
The lastest version of edbg solves a double-reset issue that was
hindering testing (see #11125 and https://github.com/ataradov/edbg/issues/77)
It also adds support for SAMR34 and SAMR35, needed by @dylad for MCU
port.
