19565: tests: move core related applications to their own tests/core/ folder r=maribu a=aabadie
19568: tests: move remaining driver related applications to tests/drivers r=maribu a=aabadie
19574: cpu/stm32/periph_gpio: reset PU/PD for ADC channels r=maribu a=gschorcht
### Contribution description
This PR provides a small fix that is relevant when a GPIO has been used as input/output with a pull resistor before it is initialized as an ADC channel.
The PU/PD configuration has to be `0b00` for analog outputs which is corresponds to the reset state. However, if the GPIO is not in the reset state but was used digital input/output with any pull resistor, the PU/PD configuration has also to be reset to use it as ADC channel.
### Testing procedure
- Green CI
- The `periph_adc` test application should still work for any board that supports the `periph_adc` feature.
### Issues/PRs references
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19484: makefiles/arch/msp430.inc.mk: Fix compilation issues with GCC 12 r=maribu a=maribu
### Contribution description
This fixes the following compilation issues:
/home/maribu/Repos/software/RIOT/cpu/msp430fxyz/periph/gpio.c: In function 'gpio_periph_mode':
/home/maribu/Repos/software/RIOT/cpu/msp430fxyz/periph/gpio.c:95:15: error: array subscript 0 is outside array bounds of 'msp_port_isr_t[0]' [-Werror=array-bounds]
95 | sel = &(isrport->SEL);
| ^~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
by adding `CFLAGS += --param-min-pagesize=0` for GCC 12 (same issue as already fixed for AVR).
and:
/usr/lib/gcc/msp430-elf/12.2.0/../../../../msp430-elf/bin/ld: warning: /home/maribu/Repos/software/RIOT/cpu/msp430_common/ldscripts/xfa.ld contains output sections; did you forget -T?
by adding the missing `-T`.
### Testing procedure
The following should still work:
- `make BOARD=msb-430 -C examples/hello-world`
- `make BOARD=msb-430 -C tests/xfa flash test`
### Issues/PRs references
None
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
GCC 12 gives out of bounds warnings when the resulting address is out
of bounds of what GCC assumes to be the valid address space. It seems
that by default the address 0x0 is not considered valid (which would
be a NULL pointer and typically not mapped in a userspace behind an MMU
scenario), but in fact is valid on bare metal hardware. At least on
AVR and MSP430 this needs to be set. On many Cortex M MCUs 0x0 is also
a valid address (e.g. often the flash is mapped there), but seemingly
for them `--param=min-pagesize=0` is already the default. In any case,
it won't hurt to set it explicit for them as well.
An `INSERT AFTER` directive no longer can refer to a different linker
script included with `-T path/to/script.ld`. Instead, this adds wrapper
linker scripts that just `INCLUDE` the three individual linker scripts.
This way, the xfa.ld can safely refer back to sections defined in
the vendor linker script.
For some reason, this approach cause the exact issue it fixes for
binutils 2.40 with the binutils in the CI. We stick with the old
linker flags with binutils prior 2.40 to be compatible with both
conflicting behaviors.
The best approach would be to come up with something that works across
different versions of binutils; but no such solution materialized.
There seems to be a consensus to go for a more ELF centric approach
whenever possible. J-Link seems to work fine with ELF files, so let's
avoid the extra step to create a bin file from the ELF file prior to
flashing.
While testing examples/micropython I notice that the default of miniterm.py is actually miniterm.
To simplify user setups, this checks for miniterm.py first then falls back to miniterm.
19374: makefiles/boards/stm32: fix DFU_USB_ID handling r=benpicco a=gschorcht
### Contribution description
This PR fixes the still existing problem that an application can't be flashed to a STM32 board if it uses `riotboot_dfu` with default VID/PID (1209:7d02).
In PR #18964 item 1, the problem was already described that an application can't be flashed on a board that is using `riotboot_dfu`. Using for example
```python
FEATURES_REQUIRED+=riotboot USEMODULE+=usbus_dfu make -C examples/saul BOARD=nucleo-f767zi \
PROGRAMMER=dfu-util all riotboot/flash-slot0
```
always leads to error
```python
/home/gs/src/RIOT-Xtensa-ESP.esp-idf-4.4/makefiles/boards/stm32.inc.mk:28: *** DFU_USB_ID is not set. Stop.
/home/gs/src/RIOT-Xtensa-ESP.esp-idf-4.4/makefiles/boot/riotboot.mk:87: recipe for target 'riotboot/bootloader/binfile' failed
```
even if `DFU_USB_ID` variable is set as described in documentation.
```python
FEATURES_REQUIRED+=riotboot USEMODULE+=usbus_dfu make -C examples/saul BOARD=nucleo-f767zi \
PROGRAMMER=dfu-util DFU_USB_ID=1209:7d02 all riotboot/flash-slot0
```
The reason is that the variable `DFU_USB_ID` isn't exported and the check 8dc8bf3567/makefiles/boards/stm32.inc.mk (L27-L29) sees an empty `DFU_USB_ID` variable here. It prevents to use `dfu-util` event though the following `dfu-util.mk` will generate a default value for this variable from the `USB_VID` and `USB_PID` variables if necessary.
Commit 6a76b94c6e0ae97bc743cc90d0811e691a35869e of PR #18964 tried to fix this problem but wasn't merged for any reason.
To fix this problem, the check is completely removed. If a board such as `weact-f4x1cx` uses a DFU boorloader and requires a certain VID/PID combination, board's makefile is responsible to set `DFU_USB_ID` variable.
### Testing procedure
It is not necessary to use a real boad, checking the compilation process is sufficient.
1. Using default VID/PID as described in documentation:
```python
FEATURES_REQUIRED+=riotboot USEMODULE+=usbus_dfu make -C examples/saul BOARD=nucleo-f767zi \
PROGRAMMER=dfu-util all riotboot/flash-slot0
```
can't be compiled without this PR but calls `dfu-util` correctly with this PR using the default VID/PID:
```python
dfu-util --device 1209:7d02 --alt 0 --download examples/saul/bin/nucleo-f767zi/riotboot_files/slot0.1678440536.bin
```
2. Using a VID/PID as described in documentation:
```python
FEATURES_REQUIRED+=riotboot USEMODULE+=usbus_dfu make -C examples/saul BOARD=nucleo-f767zi \
DFU_USB_ID=1209:affe PROGRAMMER=dfu-util all riotboot/flash-slot0
```
can't be compiled without this PR but calls `dfu-util` correctly with this PR using the default VID/PID:
```python
dfu-util --device 1209:affe --alt 0 --download examples/saul/bin/nucleo-f767zi/riotboot_files/slot0.1678440536.bin
```
3. Compiling a board with DFU bootloader
```python
make -C examples/saul flash BOARD=weact-f411ce
```
should still call dfu-util with correct VID/PID:
```python
dfu-util --device 0483:df11 --alt 0 --download /home/gs/src/RIOT-Xtensa-ESP.esp-idf-4.4/examples/saul/bin/weact-f411ce/saul_example.bin --dfuse-address 0x8000000:leave
```
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
The variable `DFU_USB_ID` is used by `dfu-util` to specify the device to be flashed. The STM32 make system prevents `dfu-util` from being used as programmer if this variable is not set, although `dfu-util.mk` generates a default value for this variable from the `USB_VID` and `USB_PID` variables if necessary. Therefore, checking the `DFU_USB_ID` variable is removed here. If a board requires a specific combination of VID/PID for `dfu_util`, it is responsible for setting the `DFU_USB_ID` variable.
Whenever the module of a peripheral driver, i.e., periph_* should be used, the corresponding entry in the
FEATURES_REQUIRED should be added. Conflicts between these modules are
only checked when this entry is present.
17091: USBUS: Add URB support r=benpicco a=bergzand
### Contribution description
This commit adds support for URBs (USB Request/Response Blocks). These
allow for submitting multi-transfer sized buffers with USBUS handling
the individual usbdev xmits. Multiple URBs can be queued at once for a
single endpoint and USBUS will handle them in the order of submission.
OUT endpoint URBs must always consist of a whole number of full-sized
transfers (N x MaxEndpointSize). They will automatically finish after
the endpoint received a transfer less than the endpoint size.
IN endpoints can be arbitrary-sized and do not have to consist of a
whole number of full-sized transmissions. They support a flag to
indicate that the last transfer in the sequence must be less than a full
sized transfer (USBUS_URB_FLAG_AUTO_ZLP) and this adds a zero length
transfer at the end of the transmissions if the last transfer was equal
to the maximum transfer size.
URBs can be cancelled, but if the URB is already being processed it will
be cancelled after the current transmission within the URB is finished.
If it is still in the queue it will immediately be removed from the
queue.
### Testing procedure
- `tests/usbus_cdc_ecm` should still work. Testing one of the usbdev-supported platform should be sufficient here.
### Issues/PRs references
Needs #17064
18148: sys/flash_utils: helpers to store data in flash r=benpicco a=maribu
### Contribution description
This helpers that allow storing, accessing, and working with data in flash that works for both classical Harvard architectures (which do not map flash also into the address space) as well as modern Harvard architectures and von-Neumann architectures.
With this, `examples/default` again runs on the Arduino Uno / Nano. Since this board is still the "entry kit" for many people to embedded hardware, it would be nice to support it with our default example.
### Testing procedure
`examples/default` should run and work on ATmega boards (especially ATmega328P and ATmega32U4 based boards) as well on all other boards now.
### Issues/PRs references
None
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
This commit adds support for URBs (USB Request/Response Blocks). These
allow for submitting multi-transfer sized buffers with USBUS handling
the individual usbdev xmits. Multiple URBs can be queued at once for a
single endpoint and USBUS will handle them in the order of submission.
OUT endpoint URBs must always consist of a whole number of full-sized
transfers (N x MaxEndpointSize). They will automatically finish after
the endpoint received a transfer less than the endpoint size.
IN endpoints can be arbitrary-sized and do not have to consist of a
whole number of full-sized transmissions. They support a flag to
indicate that the last transfer in the sequence must be less than a full
sized transfer (USBUS_URB_FLAG_AUTO_ZLP) and this adds a zero length
transfer at the end of the transmissions if the last transfer was equal
to the maximum transfer size.
URBs can be cancelled, but if the URB is already being processed it will
be cancelled after the current transmission within the URB is finished.
If it is still in the queue it will immediately be removed from the
queue.
18682: pkg/lwext4: add lightweight implementation of the ext2/3/4 filesystem r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Boards with an integrated debugger/programmer that also provides the
serial as UART <--> USB adapter, the TTY serial matches the serial of
the programmer.
This adapts the `serial.inc.mk` to set the `DEBUG_ADAPTER_ID` to the
TTY serial if (and only if) `MOST_RECENT_PORT` *and*
`DEBUG_ADAPTER_ID_IS_TTY_SERIAL` both have a value of `1`. Boards with
an integrated programmer are expected to set
`DEBUG_ADAPTER_ID_IS_TTY_SERIAL` to `1` in their `Makefile.include`.
The previous servo driver didn't provide any benefit over using PWM
directly, as users controlled the servo in terms of PWM duty cycles.
This changes the interface to provide a high level interface that
abstracts the gory PWM details.
In addition, a SAUL layer and auto-initialization is provided.
Co-authored-by: benpicco <benpicco@googlemail.com>
Before the build system used something like
echo "int main(){} void _exit(int n) {(void)n;while(1);}" | LC_ALL=C $(LINK) -xc - -o /dev/null -lc -Wall -Wextra -pedantic <FLAGS_TO_TEST>
to check for flags supported by the compiler (used as linker frontend).
This however no longer works with newlib 4.3.0, which requires the
symbols `_sbrk_r`, `_close_r`, `_lseek_r`, `_read_r`, and `_write_r` to
be present. Instead, now a new file `minimal_linkable.c` was added that
adds all the missing symbols and is used in the linker feature tests
instead.
