MrKevinWeiss
e0fdc3c16c
*Kconfig*: Modify Kconfig to remove dep model
2024-03-27 10:28:12 +01:00
Karl Fessel
05f114d0af
doc: fix unbalaced grouping
...
- most were trivial
- missing group close or open
- extra space
- no doxygen comment
- name commad might open an implicit group
this hould also be implicit cosed but does not happen somtimes
- crazy: internal declared groups have to be closed internal
2022-09-14 15:05:25 +02:00
Benjamin Valentin
5d111e71aa
boards: drop board_init() from board.h
2022-02-25 15:08:58 +01:00
c6151226ad
Merge pull request #17633 from fjmolinas/pr_ztimer_auto_adjust
...
sys/ztimer: add auto_adjust module
2022-02-23 10:01:05 +01:00
Benjamin Valentin
468ea89953
boards: drop LED init
...
This is handled by periph_init_leds now
2022-02-18 14:35:43 +01:00
Francisco Molina
59d069c59d
boards: update CONFIG_ZTIMER_USEC_ADJUST% values
2022-02-18 13:07:49 +01:00
Leandro Lanzieri
f684ecfd5c
boards: model avr-based boards Kconfig
...
Modelled boards:
arduino-duemilanove
arduino-leonardo
arduino-mega2560
arduino-nano
arduino-uno
atmega1284p
atmega256rfr2-xpro
atmega328p-xplained-mini
atmega328p
atxmega-a1-xplained
atxmega-a1u-xpro
atxmega-a3bu-xplained
avr-rss2
derfmega128
derfmega256
mega-xplained
microduino-corerf
zigduino
2021-11-22 12:25:30 +01:00
Francisco Molina
01d870dbc7
boards/atmega256rfr2-xpro add USEC_ADJUST values
2021-06-15 16:35:40 +02:00
f8822b5f8f
boards: remove not need PORT_LINUX/PORT_DARWIN
...
They defined the same in serial.inc.mk. Some Darwin default are changed because they are probably wrong
2020-12-02 09:20:57 +01:00
c6ad85a7b0
boards: don't include programmer logic at board level
2020-11-25 22:31:13 +01:00
Leandro Lanzieri
159d1dee77
boards/atmega256rfr2: Add Kconfig symbols
2020-06-23 14:37:28 +02:00
Marian Buschsieweke
f2edcf9674
makefiles/tools/avrdude: Improved debug handling
...
- Choose correct debug protocol for ATmega328P (which supports debugWIRE instead
of JTAG)
- Allow overwriting debugger device via AVR_DEBUGDEVICE environment variable,
default to the Atmel-ICE (least expensive, supports most AVR devices)
2020-03-10 14:03:33 +01:00
Marian Buschsieweke
edd93411fe
dist: De-duplicated AVR debug config & scripts
...
Use common debug.sh, debug_srv.sh and gdb.conf for all AVR boards.
2020-03-10 12:54:51 +01:00
Benjamin Valentin
1dd260b446
boards: enable RTC for every ATmega board that supports RTT
...
Every ATmega board that can run an Real Time Timer can also run
an emulated Real Time Clock.
Got all supported boards by adding `FEATURES_REQUIRED += arch_8bit`
to `tests/periph_rtt` and running
sed -i 's/FEATURES_PROVIDED += periph_rtt/
FEATURES_PROVIDED += periph_rtc\n
FEATURES_PROVIDED += periph_rtt/g'
on them.
2020-03-03 16:27:44 +01:00
Marian Buschsieweke
ff53159f0e
boards/atmega256rfr2-xpro: Refactor avrdude conf
...
- No longer include `tools/serial.mk` and `tools/avrdude.mk`, as this is
no done by `boards/common/atmega`
- No longer provide `RESET ?=`, as this is now done in `tools/avrdude.mk` for
all ATmega boards unless they are using a bootloader
2020-02-10 21:48:03 +01:00
Benjamin Valentin
6f41ecc74b
boards: ATmega: enable periph_rtt for boards with 32kHz crystal
...
The RTT on ATmega only works if the board provides a 32kHz oscillator.
2019-12-01 17:26:24 +01:00
42c4b7d34d
boards/atmega256rfr2-xpro: use 115200 baudrate for STDIO
2019-11-06 12:46:28 +01:00
485bfc45da
boards/atmega256rfr2-xpro: document how to configure the fuses
...
This is important for a correct configuration of the external 16MHz oscillator
2019-11-06 12:46:28 +01:00
498cbe9bbc
boards/atmega256rfr2-xpro: configure external 16MHz oscillator
2019-11-06 12:46:28 +01:00
f24a3802c7
boards/atmega256rfr2-xpro: configure debug
2019-11-05 10:40:32 +01:00
4751892ce9
boards/atmega256rfr2-xpro: initial support
2019-11-05 10:40:32 +01:00
