This allows to include KCONFIG_OUT_CONFIG file in Makefile
unconditionally, which means that `make clean all` is allowed when using
Kconfig.
For this, the recipe for `clean` is guarded with `MAKE_RESTARTS` so
the BINDIR folder is not removed once Make restarts scanning the files.
Introduce optional user shell_post_readline_hook, shell_pre_command_hook, shell_post_command_hook.
Enable with USEMODULE=shell_hooks.
Calls user implemented *_hook functions if defined.
If implementation does not exist, nothing happens.
The intent is to make profiling of the shell command timings easier.
Test provided in tests/shell with USEMODULE=shell_hooks.
Modified to allow including sam0.inc.mk even if none of the programmers handled
their is used. This is useful for boards that by default are programmed via a
bootloader. Still including sam0.inc.mk allows users to specify the `PROGRAMMER`
to use jlink, openocd, or edgb instead of the bootloader.
This removes a preliminar dependency resolution that is performed
without including features, to skip a full dependency resolution when
boards can be proven to be unsupported on an earlier stage.
This was introducing issues on some boards since the blacklisting of
some features depends on board information which is not available at the
time of performing this resolution.
When using eval the function board_unsatisfied_features is evaluated
twice, in the first evaluation this will lead to the previous value
for `BOARDS` to be expanded, so escape all occurrences.
Instead of making a NETTYPE definition dependent on an implementation
module, this change makes it dependent on a pseudo-module for each
specific NETTYPE and makes the respective implementation modules
dependent on it.
This has two advantages:
- one does not need include the whole implementation module to
subscribe to a NETTYPE for testing or to provide an alternative
implementation
- A lot of circular dependencies related to GNRC could be untangled.
E.g. the only reason `gnrc_icmpv6` needs the `gnrc_ipv6` is because it
uses `GNRC_NETTYPE_IPV6` to search for the IPv6 header in an ICMPv6
when demultiplexing an ICMPv6 header.
This change does not resolve these dependencies or include usages where
needed. The only dependency change is the addition of the
pseudo-modules to the implementation modules.
- Add the new EXTERNAL_BOARD_DIRS variable that can contain a space separated
list of folders containing external boards
- Introduce $(BOARDDIR) as shortcut for $(BOARDSDIR)/$(BOARD)
- Map the existing BOARDSDIR to the new approach
- If BOARDSDIR is provided by the user, it will be added to
EXTERNAL_BOARD_DIRS for backward compatibility. (And a warning is issued
to encourage users migrating to EXTRA_BOARDS.)
- BOARDSDIR is updated after the board is found to "$(BOARDDIR)/..".
- Useful for `include $(BOARDSDIR)/common/external_common/Makefile.dep`
- Provides backward compatibility
This adds a new subdirectory called `fuzzing/` which will contain
applications for fuzzing various RIOT network modules in the future.
This subdirectory is heavily inspired by the `examples/` subdirectory.
The fuzzing applications use AFL as a fuzzer. Each application contains
Makefiles, source code, and an input corpus used by AFL to generate
input for fuzzing.
Enabled by the gnrc_netif_events pseudo module. Using an internal event
loop within the gnrc_netif thread eliminates the risk of lost interrupts
and lets ISR events always be handled before any send/receive requests
from other threads are processed.
The events in the event loop is also a potential hook for MAC layers and
other link layer modules which may need to inject and process events
before any external IPC messages are handled.
Co-Authored-By: Koen Zandberg <koen@bergzand.net>
With #10970 only existing *.c files will be added to SRC when using
the SUBMODULES mechanism, so SUBMODULES_NOFORCE (used to filter out
non existing source files) is now redundant so remove the usage.
'merged.config' may not always be present (e.g. when no files to merge
are present). In order to always have an up-to-date configuration file
'out.config' will be generated mirroring the content of 'autoconf.h'.
This is the file that the build system will include to read the current
configuration symbols.
- Add FEATURES_REQUIRED_ANY to dependency-debug:
Now `make dependency-debug` by default also stores the contents of
`FEATURES_REQUIRED_ANY`.
- makefiles/features_check.inc.mk: Break long lines
- {tests/minimal,tests/unittests,bootloaders/riotboot}:
Disable auto_init_% in addition to auto_init.
This works around weird behavior due to the USEMODULE being recursively expended
in the first iteration of dependency resolution: Modules added to DEFAULT_MODULE
get automatically added to USEMODULE during the first run, but not for
subsequent. This should be iron out later on.
Goals:
- Untangle dependency resolution and feature checking for better maintainability
- Improve performance of "make info-boards-supported"
Changes:
- Makefile.dep
- Dropped handling of default modules and recursion
- Now only dependencies of the current set of used modules and pkgs are
added
==> External recursion is needed to catch transient dependencies
- Changed Makefile.features:
- Dropped checking of provided features
- Dropped populating FEATURES_USED with provided features that are required
or optional
- Dropped populating FEATURES_MISSING with required but not provided
features
- Dropped adding modules implementing used features to USE_MODULE
==> This now only populates FEATURES_PROVIDED, nothing more
- Added makefiles/features_check.inc.mk:
- This performs the population of FEATURES_USED and FEATURES_MISSING now
- Added makefiles/features_modules.inc.mk:
- This performs now the addition of modules implementing used features
- Added makefiles/dependency_resolution.inc.mk:
- This now performs the recursion required to catch transient dependencies
- Also the feature check is performed recursively to handle also required
and optional features of the transient dependencies
- DEFAULT_MODULES are added repeatedly to allow it to be extended based on
used features and modules
==> This allows modules to have optional dependencies, as these
dependencies can be blacklisted
- Use simply expanded variables instead of recursively expended variables
(`foo := $(bar)` instead `foo = $(bar)`) for internal variables during feature
resolution. This improves performance significantly for
`make info-boards-supported`.
- Reduce dependency resolution steps in `make info-boards-supported`
- Globally resolve dependencies without any features (including arch)
provided
==> This results in the common subset of feature requirements and modules
used
- But for individual boards additional modules might be used on top due
to architecture specific dependencies or optional features
- Boards not supporting this subset of commonly required features are not
supported, so no additional dependency resolution is needed for them
- For each board supporting the common set of requirements a complete
dependency resolution is still needed to also catch architecture specific
hacks
- But this resolution is seeded with the common set of dependencies to
speed this up
This adds cortexm_fpu to the DEFAULT_MODULE list when the feature
cortexm_fpu is provided by the architecture. It also moves the
dependency resolution of this module to the architecture-specific
Makefile.dep file.
This moves the following modules to a architecture-specific Makefile.dep
file:
- cortexm_common
- cortexm_common_periph
- newlib
- newlib_nano
- periph
An application/test/module that requires one feature out of a set of
alternatives (let's say either periph_uart, periph_spi, or periph_i2c) can
request this now using:
FEATURES_REQUIRED_ANY += periph_uart|periph_spi|periph_i2c
RFC4648 specifies an alternate alphabet for base64 encoding / decoding
where '+' and '/' are exchanged for '-' and '-' to make the resulting
string safe to use in filenames and URLs.
This adds a base64url_encode() function that uses the alternate alphabet.
The base64_decode() function is extended to accept both alphabets.
This adds a driver for the SPI based AT86RF215 transceiver.
The chip supports the IEEE Std 802.15.4-2015 and IEEE Std 802.15.4g-2012 standard.
This driver supports two versions of the chip:
- AT86RF215: dual sub-GHz & 2.4 GHz radio & baseband
- AT86RF215M: sub-GHz radio & baseband only
Both radios support the following PHY modes:
- MR-FSK
- MR-OFDM
- MR-O-QPKS
- O-QPSK (legacy)
The driver currently only implements support for legacy O-QPSK.
To use both interfaces, add
GNRC_NETIF_NUMOF := 2
to your Makefile.
The transceiver is able to send frames of up to 2047 bytes according to
IEEE 802.15.4g-2012 when operating in non-legacy mode.
Known issues:
- [ ] dBm setting values are bogus
- [ ] Channel spacing for sub-GHz MR-O-QPSK might be wrong
- [ ] TX/RX stress test will lock up the driver on openmote-b
If flasher is changed then make will still see it as a FLASH
dependency and try to execute the target which will likely not
exist.
A use case for this is when flashing on a remote machine and setting
FLASHER=ssh to then execute the FLASHER on the remote.
