Martine Lenders
873b71c3e9
tests/unittests/tests-rtc: do not use DST info for normalization
...
`rtc_tm_normalize` does not use it, so `mktime` should not either.
2021-04-13 14:37:19 +02:00
benpicco
bd6114ae9d
Merge pull request #16187 from benpicco/cpu/sam0_common/get_tamper
...
cpu/sam0_common: add rtc_get_tamper_event()
2021-04-13 14:11:46 +02:00
benpicco
fa8057ffbf
Merge pull request #16180 from nicoHarel/drivers/ds3231
...
drivers/ds3231: add alarm support
2021-04-13 13:57:16 +02:00
chrysn
5239f5ed13
boards/microbit-v2: Add buttons
2021-04-13 11:09:57 +02:00
Francisco
2f28ad4f1c
Merge pull request #16231 from maribu/tests/malloc_thread_safety
...
tests/malloc_thread_safety: improve test
2021-04-13 11:00:16 +02:00
Benjamin Valentin
13fbb7c1a0
cpu/sam0_common: add rtc_tamper_pin_mask()
2021-04-13 10:45:16 +02:00
Benjamin Valentin
9d482c4448
cpu/sam0_common: RTC: only write TAMPCTRL when tamper is enabled
...
If we configure TAMPCTRL early, GPIO events will set bits in the
TAMPCTRL register.
That means that after a wake-up, we can't tell if the bit was set
because it was the wake-up source or if it was already set by a
run-time GPIO event.
2021-04-13 10:45:16 +02:00
Benjamin Valentin
55c95cd8fd
tests/periph_gpio: display tamper wake event
2021-04-13 10:45:16 +02:00
Benjamin Valentin
73dbda99ac
cpu/sam0_common: add rtc_get_tamper()
...
Add a function to query which tamper event woke the CPU from hibernation.
2021-04-13 10:45:16 +02:00
Leandro Lanzieri
58ec967cc6
Merge pull request #16264 from MrKevinWeiss/pr/pkgupdate/kconfig
...
pkg/*/Kconfig: Model simple pkgs in Kconfig
2021-04-12 19:01:18 +02:00
Jue
80360e5308
cpu/stm32/gpio_f1: fix IRQ handler
2021-04-12 18:45:04 +02:00
Hauke Petersen
3571db64e6
Merge pull request #15648 from haukepetersen/opt_nimble_rmnetifbuffers
...
pkg/nimble/netif: use global MSYS memory pool
2021-04-12 17:25:17 +02:00
Jue
2f503f11fa
cpu/stm32/gpio_all: fix IRQ handler for G0/L5/MP1 families
2021-04-12 17:01:33 +02:00
Hauke Petersen
6a8b6ca3f5
pkg/nimble/netif: use global MSYS memory pool
2021-04-12 16:26:23 +02:00
Hauke Petersen
9926e33751
Merge pull request #15782 from haukepetersen/opt_sema_ztimer
...
sys/sema: allow to use ztimer and/or xtimer
2021-04-12 14:44:31 +02:00
Francisco
505dcb7a62
Merge pull request #16314 from miri64/tests/enh/periph_rtt_min
...
tests/periph_rtt_min: harden test
2021-04-12 14:11:41 +02:00
Hauke Petersen
4cd9e96066
tests/sema: add test for sema_wait_timed_ztimer()
2021-04-12 13:08:39 +02:00
Hauke Petersen
b339e91e18
sys/sema: allow to use ztimer and/or xtimer
2021-04-12 13:08:39 +02:00
José Alamos
a4c479ca53
Merge pull request #16313 from fjmolinas/riot-loramac-system-aes
...
[TAKEOVER]: pkg/semtech-loramac: switch to RIOT AES
2021-04-12 13:06:39 +02:00
Martine Lenders
4e3ed19802
Merge pull request #16302 from iosabi/lwip_test
...
lwip_sock: Make sock_tcp_read return more data if available and test it
2021-04-12 12:27:26 +02:00
Martine Lenders
fc6dc25da4
tests/periph_rtt_min: harden test
...
- Better self-containment: read number of expected samples from output
rather than the environment
- Less reliance on `stdout` timing: Count samples in application and
output it rather then counting flushed dots.
2021-04-12 11:56:25 +02:00
Oleg Artamonov
a3cbeee9ce
pkg/semtech-loramac: switch to RIOT AES
2021-04-12 11:13:50 +02:00
Hauke Petersen
e28ec7907b
Merge pull request #15806 from haukepetersen/opt_nrf5x_nrfblehfxo
...
cpu/nrf/radio/nrfble: request HFXO only on demand
2021-04-12 11:04:12 +02:00
chrysn
101a9936ba
Merge pull request #16299 from benpicco/examples/doc-fix
...
examples: small fixes
2021-04-11 08:14:51 +02:00
Benjamin Valentin
737578a7bf
examples/suit_update: allow the use of large MTUs
...
Transfer time is reduced significantly if we can use fewer frames
with large MTUs.
2021-04-11 01:08:11 +02:00
Benjamin Valentin
44fa20dcc0
examples/suit_update: add LinkHeader dependency
...
Aiocoap requires the LinkHeader package to be installed.
2021-04-11 01:08:11 +02:00
iosabi
73fab03e31
boards/common/esp8266: Set RTS and DTR to 0 on pyterm.
...
When flashing the ESP8266 with the flash tool it is possible to connect
RTS to the reset line and DTR to GPIO0 to automatically reboot the
device into flash mode and then reboot the device again into normal
mode.
pyterm leaves these two signals unset unless we specify a --set-rts=0 or
1, and the value of these lines would depend on the UART driver.
This patch explicitly sets RTS and DTR to 0 (high level) in the
Makefile.include config so `make term` releases the reset line,
otherwise the device may be left in reset mode after pyterm starts.
2021-04-10 22:50:35 +02:00
iosabi
0c40158eac
cpu/esp8266: Fix typo in esp_gdbstub config.
...
The extra `)` was a typo from the commit that changes the makefile
inline "if" to a multi-line "if" block.
Tested with `USEMODULE="esp_gdbstub" make BOARD=esp8266-esp-12x -C tests/lwip`
2021-04-10 22:49:23 +02:00
iosabi
9974803f43
tests/lwip: Add a test for partial TCP reads.
...
Add a new test to check the behavior of `sock_tcp_read` when more data
is available in the connection than the buffer passed. This test checks
issue #16124 as well as reading from multiple small network packets into
a single buffer.
2021-04-10 17:14:11 +00:00
iosabi
e469f2dea4
lwip_sock: Make sock_tcp_read return data if available
...
When reading from the socket with `sock_tcp_read()` it would only return
data from at most one internal connection buffer, even if the buffer
passed to `sock_tcp_read()` is larger and there is more data available
in the connection. This patch makes `sock_tcp_read` process all the
available data so long as there's more data to read available
immediately.
2021-04-10 18:45:57 +02:00
Benjamin Valentin
eb801ad684
examples/gnrc_border_router: fix wording in Makefile
2021-04-10 01:08:48 +02:00
0397cab91c
Merge pull request #16297 from fjmolinas/pr_sgp30_unused_var
...
drivers/sgp30: unused variable when DEVELHELP=0
2021-04-09 21:54:21 +02:00
benpicco
f157be3426
Merge pull request #16214 from benpicco/examples/gnrc_border_router-eth
...
examples/gnrc_border_router: enable ethernet uplink
2021-04-09 19:36:01 +02:00
Francisco Molina
7079525b35
drivers/sgp30: unused variable when DEVELHELP=0
2021-04-09 18:19:33 +02:00
Fabian Hüßler
f5f2decfa4
nrf24l01p_ng: add hook nrf24l01p_ng_eui_get()
2021-04-09 17:39:40 +02:00
Martine Lenders
6300eb2422
Merge pull request #16230 from fjmolinas/pr_ryot_yaml_runners
...
.github/workflows: add riot-ryot.yml
2021-04-09 17:25:29 +02:00
Francisco Molina
3e20e3b018
.github/workflows: add riot-ryot.yml
...
Add github actions configuration to run all tests on BOARDs
connected to ci-riot-tribe.
Will run on all new Release Candidates and weekly on master.
2021-04-09 16:53:42 +02:00
6ee94bdcdf
Merge pull request #16222 from fjmolinas/pr_driver_sgp30
...
driver/sgp30: initial import
2021-04-09 14:00:38 +02:00
6a69ea0793
Merge pull request #16294 from kaspar030/riotboot_pkg_prepare
...
make: make riotboot target depend on pkg-prepare
2021-04-09 13:26:57 +02:00
668e90adfc
Merge pull request #16292 from kaspar030/clist_is_empty
...
core: add clist_is_empty()
2021-04-09 11:48:48 +02:00
benpicco
17366609cf
Merge pull request #16291 from fjmolinas/pr_suit_use_realeas_aiocoap
...
examples/suit_update: use aiocoap 0.4.1
2021-04-09 11:24:35 +02:00
eca4ff7a04
make: make riotboot target depend on pkg-prepare
...
When riotboot depends on a package for building that the main
application also depends on (e.g., gecko_sdk for efm32), previously,
that package would be checked out twice in parallel, which fails.
This commit adds pkg-prepare as dependency to the bootloader target,
ensuring any packages are already up-to-date before calling the
bootloader submake.
2021-04-09 11:12:58 +02:00
f48aba5035
tests/unittests: add clist_is_empty() test case
2021-04-09 10:54:29 +02:00
020945a773
core/clist: add clist_is_empty()
2021-04-09 10:54:29 +02:00
Francisco Molina
cf9b95fc1d
examples/suit_update: use aiocoap >= 0.4.1
2021-04-09 08:56:55 +02:00
MrKevinWeiss
008660fccf
sys/random: Fix typo in kconfig
2021-04-08 16:44:10 +02:00
MrKevinWeiss
a3075ec0c4
makefiles/info: Add make info-packages command
2021-04-08 16:44:10 +02:00
MrKevinWeiss
450b70e345
tools/kconfiglib: Allow for - in symbols
2021-04-08 16:44:10 +02:00
MrKevinWeiss
13db748fc8
.murdock: Enable pkg kconfig tests
2021-04-08 16:44:10 +02:00
MrKevinWeiss
600e9f4e47
tests/pkg*: Add app.config.test to pkg tests
...
This adds app config to the package tests that are available:
- tests/pkg_c25519
- tests/pkg_cayenne-lpp
- tests/pkg_cifra
- tests/pkg_cn-cbor
- tests/pkg_emlearn
- tests/pkg_hacl
- tests/pkg_heatshrink
- tests/pkg_jsmn
- tests/pkg_libb2
- tests/pkg_libcose
- tests/pkg_libfixmath
- tests/pkg_libhydrogen
- tests/pkg_lora-serialization
- tests/pkg_micro-ecc
- tests/pkg_minmea
- tests/pkg_monocypher
- tests/pkg_nanocbor
- tests/pkg_nanopb
- tests/pkg_qcbor
- tests/pkg_qdsa
- tests/pkg_relic
- tests/pkg_tiny-asn1
- tests/pkg_tinycbor
- tests/pkg_tinycrypt
- tests/pkg_tweetnacl
- tests/pkg_yxml
2021-04-08 16:44:10 +02:00
