2d603269dd
cpu/stm32gx: disable hsi only if unused
2020-10-20 14:29:11 +02:00
20894e47a6
cpu: boards: stm32gx: use IS_ACTIVE macro for clock config
2020-10-20 14:29:11 +02:00
a96ca57f66
cpu/stm32gx: remove useless LSE clock initialization
2020-10-20 14:29:11 +02:00
d78a316139
cpu: boards: stm32gx: compile code for all possible clock modes
2020-10-20 14:29:11 +02:00
d1724d6718
cpu/stm32l4: correctly handle clock freq > 80MHz
2020-10-20 11:37:46 +02:00
00ea7ffa55
cpu/stm32l4wb: cleanup clock initialization
2020-10-20 11:37:46 +02:00
d7d5d9d651
boards/stm32l4: extend clock configuration
...
- add PLLQ default value
- better tune default PLLM value depending on HSE value
- ensure CLOCK_PLL_SRC is always defined
2020-10-20 11:37:45 +02:00
b11d65ab70
cpu/stm32l4: enable PLLQ as 48MHz source if possible
2020-10-20 11:37:45 +02:00
58ad0168e7
cpu/stm32: stm32l011 lines doesn't provide hwrng
2020-10-15 16:24:33 +02:00
2e2b87dda5
cpu/stm32: define EEPROM size for stm32l011k4
2020-10-15 16:24:33 +02:00
e51279b228
cpu/stm32l0: fix clk control register reset
...
on stm32l011, RCC_CR_CSSON is not defined
2020-10-15 16:24:33 +02:00
044acf1175
cpu/stm32: enable power overdrive on f4 and f7
...
This is only enabled if the HCLK clock is above 168MHz on F4 and 180MHz on f7
2020-10-14 13:36:20 +02:00
Cenk Gündoğan
0741f161ae
Merge pull request #15198 from leandrolanzieri/pr/kconfig/add_error_symbols
...
Kconfig: add error symbols and makefile check
2020-10-13 13:09:42 +02:00
Marian Buschsieweke
6294382627
cpu/stm32: Use mii.h for periph_eth
...
Use shared MII definitions and utilities instead own definitions.
2020-10-12 08:46:20 +02:00
benpicco
94e78cd1dd
Merge pull request #15193 from maribu/stm32_eth_fix
...
cpu/stm32: Fix & cleanup periph_eth
2020-10-11 21:40:36 +02:00
Marian Buschsieweke
0e43c927b1
cpu/stm32: Fix/cleanup periph_eth
...
The methods to read from / write to MII registers had an address argument to
allow specifying the PHY to communicate with. However, only a single PHY is
available on all boards supported and the driver is not able to operate with
multiple PHYs anyway - thus, drop this parameter for ease of use.
This fixes a bug in the _get_link_status() function, which used hard coded the
address 0; which might not be correct for all boards.
2020-10-09 20:20:54 +02:00
Leandro Lanzieri
fe6d66d92a
kconfig: add ERROR symbol for conflicting modules
2020-10-09 18:04:17 +02:00
42067b0091
cpu/stm32/kconfig: restore features provided at cpu lines level
2020-10-09 12:39:22 +02:00
87f2f7ab99
cpu/stm32wb: extend Kconfig cpu lines and models
2020-10-09 12:39:22 +02:00
85a3167e4f
cpu/stm32l4: extend Kconfig cpu lines and models
2020-10-09 12:39:22 +02:00
841f500477
cpu/stm32l1: extend Kconfig cpu lines and models
2020-10-09 12:39:22 +02:00
11f3f2de74
cpu/stm32l0: extend Kconfig cpu lines and models
2020-10-09 12:39:22 +02:00
e8479b8cb5
cpu/stm32g4: extend Kconfig cpu lines and models
2020-10-09 12:39:22 +02:00
f223516a39
cpu/stm32g0: extend Kconfig cpu lines and models
2020-10-09 12:39:22 +02:00
7a510c08ff
cpu/stm32f7: extend Kconfig cpu lines and models
2020-10-09 12:39:22 +02:00
1c63b79a6d
cpu/stm32f4: extend Kconfig cpu lines and models
2020-10-09 12:39:21 +02:00
2c0930a3e7
cpu/stm32f3: extend Kconfig cpu lines and models
2020-10-09 12:39:21 +02:00
3d0c91d486
cpu/stm32f2: extend Kconfig cpu lines and models
2020-10-09 12:39:21 +02:00
3c08d564eb
cpu/stm32f1: extend Kconfig cpu lines and models
2020-10-09 12:39:21 +02:00
2490e01445
cpu/stm32f0: extend Kconfig cpu lines and models
2020-10-09 12:39:21 +02:00
06c3361a15
cpu/stm32/dist: add generator for kconfig cpu lines and models
2020-10-09 12:39:21 +02:00
Marian Buschsieweke
7b4d4c198b
cpu/stm32/periph_eth: Code style
2020-10-08 11:46:39 +02:00
Marian Buschsieweke
ab30865a08
cpu/stm32: Cleanup periph_eth
...
Cleanup functions _rw_phy(), _phy_read(), and _phy_write() and rename them to
_mii_reg_{access,read,write}().
2020-10-08 11:46:39 +02:00
3e1fa30c2f
cpu/stm32/irqs: fix vectors generator script
2020-10-08 08:09:31 +02:00
benpicco
2289a188ed
Merge pull request #15164 from maribu/stm32-eth-fix-link-status
...
cpu/stm32: Fix periph_eth link status
2020-10-06 23:46:34 +02:00
4613f840f4
cpu/stm32: put GPIO in ain before initializing the clocks
2020-10-06 16:10:05 +02:00
0d786e3dbb
cpu: boards: stm32f2/f4/f7: rework clock configuration and init
2020-10-06 16:10:05 +02:00
Marian Buschsieweke
7b738a66c4
cpu/stm32: Fix periph_eth link status
...
The link status was previously not returned via the value parameter, as required
by the netdev_driver_t API. As a result, e.g. the `ifconfig` shell command
showed garbage.
2020-10-06 10:29:38 +02:00
Marian Buschsieweke
7920d32e32
cpu/stm32: Clean up periph_eth
...
Use `addr` instead of `mac` when referring to L2 address.
2020-10-05 16:03:47 +02:00
7159fa03fc
Merge pull request #15119 from hugueslarrive/adc_f3
...
cpu/stm32/periph/adc_f3: add ADC3 and ADC4 management
2020-10-01 17:00:00 +02:00
hugues
3d6b473cd7
cpu/stm32/adc_f3: improve peripheral driver
...
- fix clock enable/disable bitfields
- add management for ADC3 and ADC4
- improve calibration
2020-10-01 11:08:45 +02:00
Francisco
b5c51d244e
Merge pull request #14909 from OTAkeys/pr/conn_can_clean_up
...
can: add proper checks for ifnum validity
2020-10-01 09:22:28 +02:00
Vincent Dupont
590f07b38a
stm32/can: fix features dependency
2020-09-30 12:59:03 +02:00
40262c1b7a
cpu/stm32: reorganize Kconfig files per families
2020-09-30 10:31:38 +02:00
1e6a336227
cpu/stm32/Kconfig: move features declared in models to lines
2020-09-30 10:31:29 +02:00
8738bd5e5c
cpu/stm32: select lines from models in Kconfig
2020-09-30 10:31:29 +02:00
d1bab4a25f
cpu/stm32: add Kconfig config for all cpu lines
2020-09-30 10:31:29 +02:00
ba4edb3c63
cpu/stm32: split main Kconfig
2020-09-30 10:31:29 +02:00
e8c79e7a41
cpu/stm32: extend CPU_LINES for G4 and L1
2020-09-30 10:31:29 +02:00
cada451383
cpu/stm32: document info extracted from CPU model name
2020-09-30 10:31:28 +02:00
