As a leftovers from https://github.com/RIOT-OS/RIOT/pull/18355 are still
present that check for `MODULE_SHELL_COMMANDS` rather than
`MODULE_SHELL_CMDS`. This updates the conditionals as needed.
- most were trivial
- missing group close or open
- extra space
- no doxygen comment
- name commad might open an implicit group
this hould also be implicit cosed but does not happen somtimes
- crazy: internal declared groups have to be closed internal
Otherwise if the cable is connected at boot the immediate NETDEV_EVENT_ISR
event signaling connection will not trigger the isr, and the netdev will not
clear its pending event.
This explains why the connect/rx event clash seen in "esp32/eth: Don't
overwrite queued event with RX packet" (95196fb7e4) only happened
with lwIP.
Now on my ESP32 board with Ethernet the issue was the opposite (since IDF
upgrade), the stuck connected event blocked receive from working. After
this change 95196fb7e4 can be reverted since even early events are
consumed properly.
Enables the SDL driver for LVGL to utilize a user prescribed width/height for display resolution when utilizing SDL, or rely on the SDL_HOR/VER_RES provided by lv_drv_conf.h in lv_drivers
The definition of gettimeofday in pkg/ccn-lite leads to multiple definitions on platforms where gettimeofday is compiled in in newlib. Therefore, the gettimeofday function in pkg/ccn-lite is declared as weak symbol.
The package uses the nRFx SDK package `nrfx`. In addition, the `mynewt-nimble` repository contains some files (`porting/nimble/src/hal_timer.c` and `porting/npl/riot/src/nrf5x_isr.c`) that are compilable only for nRF MCUs. To allow the compilation for other platforms, the use of the `nrfx` package and the compilation of these files are now dependent on the use of any nRF5x MCU.
If the package is used for a controller that supports the HCI UART H4 transport layer protocol, the functions implemented in `nimble/transport/common/hci_h4` are very useful to deal with H4 formatted packages. If required, they can be enabled by module `nimble_transport_hci_h4`.
Using a `BLE_ADDR_RANDOM` as the peer address type allows connecting only to peers that have a static random address. Deriving the peer address type from the peer address is simple and allows connections to be established with peers that have either a public or
static random address.
If the Bluetooth 5 Advertising Extension is enabled by the `nimble_adv_ext` module, up to 3 events come in from the controller during connection establishment before they are processed by the host. The default size of the event queue `MYNEWT_VAL_BLE_TRANSPORT_EVT_COUNT` with only 2 entries is therefore too small and the connection establishment fails.
To control the compilation of NimBLE modules `nimble_*_ext` that require the Bluetooth 5 Advertising Extension, the `ble_adv_ext` is introduced to indicate that a platform supports this feature.
The patches include the following changes:
- define ARRAY_SIZE in `component/spi_flash/spi_flash_timing_tuning.c` only if it is not yet defined by RIOT macros
- add alternative implementations for`spi_flash_disable_interrupts_caches_and_other_cpu` and `spi_flash_enable_interrupts_caches_and_other_cpu` if compiled for RIOT
- fix the undefined reference to `rtc_gpio_force_hold_en_all` in `components/driver/gpio.c`
- rename the bootloader patch to fix the serial number
