benpicco
e77d12da26
Merge pull request #15188 from benpicco/drivers/kw41zrf-register
...
drivers/kw41zrf: register with netdev
2020-10-31 14:30:00 +01:00
Marian Buschsieweke
125c892c03
drivers/periph/timer: Use uint32_t for frequency
...
For all currently supported platforms `unsigned long` is 32 bit in width. But
better use `uint32_t` to be safe.
2020-10-30 22:02:12 +01:00
cd3ee9e825
drivers/mii: fix typo 'auto-negotation' => 'auto-negotiation'
2020-10-27 10:33:48 +01:00
Benjamin Valentin
fde3026312
drivers/mtd_spi_nor: prevent data corruption on 'sector erase'
...
There is no difference between 4k erase and sector erase.
But sector erase would previously do `.block_erase` which would not
erase a sector (4k) but a whole block (64k).
Fortunately all boards declare `SPI_NOR_F_SECT_4K` and all file systems
don't try to erase anything smaller, so this was never triggered.
Add an `assert(0)` to crash instead of corrupting data.
2020-10-26 13:48:26 +01:00
Benjamin Valentin
0425325260
drivers/mtd_spi_nor: use single transfer to read JEDEC ID
...
Just read the JEDEC ID with a single SPI transfer, there can only
be 10 banks.
This makes adaption to QSPI much simpler because now flash functions
don't call the SPI API directly anymore.
2020-10-26 13:02:09 +01:00
Bas Stottelaar
26835a949f
drivers/*: remove unused assert.h include
2020-10-22 11:29:27 +02:00
chrysn
d196c7c4a6
drivers/saul/auto_init: Add PWM for LEDs
...
In analogy to the existing GPIO mappings, this provides (write-only)
SAUL entries for PWM'd LEDs in a single-LED (as SAUL_ACT_DIMMER) and an
RGB (as SAUL_ACT_RGB_LED) mode.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
2020-10-17 11:20:17 +02:00
benpicco
4edf5c7cbd
Merge pull request #15208 from benpicco/ieee802154_submac-etx
...
netdev/ieee802154_submac: add retransmission reporting
2020-10-15 14:31:54 +02:00
Benjamin Valentin
37aad4ef38
netdev/ieee802154_submac: add retransmission reporting
...
If we do software retransmissions, we already keep a count.
Allow to query it with `NETOPT_TX_RETRIES_NEEDED`.
2020-10-15 13:26:42 +02:00
Nishchay-sopho
eb1064eef4
drivers/scd30: Add reset function to Sensirion scd30 sensor
2020-10-14 15:07:01 +02:00
Marian Buschsieweke
6294382627
cpu/stm32: Use mii.h for periph_eth
...
Use shared MII definitions and utilities instead own definitions.
2020-10-12 08:46:20 +02:00
Marian Buschsieweke
33d916b237
drivers/mii: Media-Independent Interface utils
...
Add utilities for working with Ethernet Media-Independent Interface for use by
Ethernet drivers.
2020-10-12 08:46:20 +02:00
Benjamin Valentin
b32bc3dbd1
drivers/kw41zrf: register with netdev
2020-10-08 16:19:23 +02:00
Benjamin Valentin
1afe72a5e5
drivers/enc28j60: register with netdev
2020-10-08 10:36:56 +02:00
benpicco
ab37c9fba1
Merge pull request #14949 from benpicco/drivers/mrf24j40-register
...
drivers/mrf24j40: register with netdev
2020-10-08 10:33:37 +02:00
Francisco
3918d714ce
Merge pull request #13624 from wosym/pr/candev_mcp2515
...
tests/candev: add mcp2515 + driver/mcp2515: add driver
2020-10-08 09:45:40 +02:00
Benjamin Valentin
a1d8c79a98
drivers/mrf24j40: pass long address via pointer
2020-10-07 16:39:39 +02:00
Benjamin Valentin
988ee1648f
drivers/mrf24j40: register with netdev
2020-10-07 16:39:39 +02:00
Marian Buschsieweke
5b9463aca1
drivers/netdev: Clarify documentation
2020-10-06 10:48:06 +02:00
Wouter Symons
757f810118
drivers/mcp2515: complete driver + adapt to 2020 RIOT API
2020-10-03 15:20:42 +02:00
Vincent Dupont
62a9929f9b
mcp2515: add a driver for the mcp2515 SPI CAN controller
...
This driver implements the candev interface
2020-10-03 15:20:42 +02:00
feac7dc978
drivers/pir: fix typo 'whan' -> 'when'
2020-10-02 08:06:16 +02:00
dc8d32d30e
drivers/periph/gpio: fix typo 'occured' -> 'occurred'
2020-10-02 08:05:55 +02:00
9236b6ca5c
drivers/ltc4150: fix typo 'tread' -> 'treat'
2020-10-02 08:05:31 +02:00
59297c3779
drivers/lc709203f: fix typo 'Invlid' -> 'Invalid'
2020-10-02 08:05:00 +02:00
5ef55e37d7
drivers/ina3221: fix typos
...
- 'measurment' -> 'measurement'
- 'enble' -> 'enable'
2020-10-02 08:04:23 +02:00
2f2eeb7a7b
drivers/at: fix typo 'correspondant' -> 'correspondent'
2020-10-02 08:03:10 +02:00
benpicco
6cb8da7813
Merge pull request #14950 from jia200x/pr/ieee802154/submac
...
ieee802154_submac: add initial support for common MAC sub layer
2020-10-01 11:31:52 +02:00
Jose Alamos
4bb77b0b2f
netdev/ieee802154_submac: add compatibility layer
2020-09-30 17:25:31 +02:00
benpicco
b2401eb73b
Merge pull request #14966 from HendrikVE/pr/driver/aip31068
...
driver/aip31068: add new driver
2020-09-30 15:52:52 +02:00
Hendrik van Essen
6778bf4b98
driver/aip31068: add new driver
2020-09-29 14:42:15 +02:00
Martine Lenders
cd8666735e
Merge pull request #15107 from benpicco/boards/samr21-xpro_edbg_eui
...
boards/samr21-xpro: fix reading EUI-64 from EDBG on cold boot
2020-09-29 11:04:04 +02:00
Benjamin Valentin
971c03eeb9
drivers/edbg_eui: add note on edbg startup time
2020-09-28 20:18:43 +02:00
7c029c7f43
Merge pull request #14907 from OTAkeys/pr/adcxx1c_get_alert
...
drivers/adcxx1c: add clear alert function
2020-09-28 13:28:15 +02:00
316871a4fa
Merge pull request #15068 from MrKevinWeiss/pr/dev_enum
...
drivers/dev_enums: Remove unused dev_enums.h
2020-09-25 17:35:21 +02:00
MrKevinWeiss
7893158b5a
drivers/dev_enums: Remove unused dev_enums.h
2020-09-24 09:27:39 +02:00
Viktor Gal
7ea8f738fd
Add support for Adafruit Seesaw Soil moisture sensor ( #14835 )
...
drivers/seesaw_soil: Add support for Adafruit Seesaw Soil moisture sensor
2020-09-23 17:35:33 +02:00
chrysn
9295f69da4
Merge pull request #15062 from kaspar030/fix_efm32_16b_timer_set_absolute
...
cpu/efm32/periph/timer: fix timer_set_absolute() in 16bit case
2020-09-23 11:28:00 +02:00
chrysn
d8d56e5e3a
periph/timer: Document that set_absolute is expected to wrap
...
Most timers are implemented this way already, and keeping (documenting)
it that way allows the generic timer_set implementation to stay as
simple as it is.
2020-09-23 10:59:18 +02:00
MrKevinWeiss
cc1c2ab811
drivers/periph: Remove unused timer enum from dev_enums
2020-09-22 16:26:01 +02:00
José Alamos
9c130cd2fd
Merge pull request #15032 from jia200x/pr/at86rf2xx/fix_overflow
...
drivers/at86rf2xx: fix at86rf2xx_set_rxsensitivity
2020-09-17 10:32:06 +02:00
Jose Alamos
074dc8d328
drivers/at86rf2xx: fix at86rf2xx_set_rxsensitivity
2020-09-16 14:47:51 +02:00
Benjamin Valentin
696ddf3dbb
drivers/periph/timer: amend documentation for timer_set_periodic()
...
The function needs the `periph_timer_periodic` feature.
Add a `@note` about that to the documentation.
2020-09-13 19:06:28 +02:00
benpicco
842933855f
Merge pull request #14995 from benpicco/cpu/cc2538-register
...
cc2538_rf: register with netdev
2020-09-11 16:03:08 +02:00
Benjamin Valentin
1811686540
cc2538_rf: register with netdev
2020-09-11 13:33:37 +02:00
Francisco
858533e68e
Merge pull request #14994 from benpicco/nrf802154-register
...
nrf802154: register with netdev
2020-09-11 12:48:40 +02:00
Cenk Gündoğan
0d0bc91553
Merge pull request #14754 from leandrolanzieri/pr/no_archives
...
build system: link object files
2020-09-10 09:36:29 +02:00
Benjamin Valentin
58dc106309
nrf802154: register with netdev
2020-09-10 00:05:25 +02:00
9b9ed236ba
Merge pull request #14916 from MrKevinWeiss/pr/slwstk6220a
...
drivers/periph: Remove UART from device_enums.h
2020-09-09 10:53:27 +02:00
fdaf7fd822
Merge pull request #14596 from benpicco/drivers/at86rf2xx-retries
...
drivers/at86rf2xx: support frame retry reporting on AT86RFR2
2020-09-09 10:27:05 +02:00
MrKevinWeiss
bdeb39576e
drivers/periph: Remove UART from dev_enums.h
2020-09-09 10:25:38 +02:00
Benjamin Valentin
0871b69c84
drivers/at86rf2xx: support frame retry reporting on at86rfr2
...
At86rfr2 doesn't report retries directly, but it can generate a TX start
interrupt for each (re)try, so we can count manually.
2020-09-08 14:48:57 +02:00
Benjamin Valentin
634714ff78
drivers/at86rf215: implement Reduced Power Consumption
...
Reduced Power Consumption is available for MR-O-QPSK and
MR-FSK.
In this mode the receiver will be turned off periodically,
defaulting to a 50% duty cycle.
This reduces power consumption when in IDLE RX by almost 50%
and is therefore enabled by default.
2020-09-07 13:48:47 +02:00
Leandro Lanzieri
16b5fd303b
drivers: add usbdev_mock
2020-09-04 15:01:16 +02:00
Francisco
6f84870c26
Merge pull request #14634 from benpicco/eui_provider
...
net/link_layer: implement EUI provider
2020-09-01 16:26:08 +02:00
benpicco
6f271b7d3e
Merge pull request #14903 from benpicco/drivers/include/periph/rtc-fix
...
drivers/periph_common: RTC: fix doxygen
2020-09-01 15:15:55 +02:00
Vincent Dupont
8526e68b70
drivers/adcxx1c: add clear alert function
2020-08-31 15:53:53 +02:00
Benjamin Valentin
bd57640d5b
drivers/periph_common: RTC: fix doxygen
2020-08-31 14:16:42 +02:00
Gunar Schorcht
147b79169c
drivers/periph/gpio: add comparison functions
...
The expandable GPIO API requires the comparison of structured GPIO types. This means that inline functions must be used instead of direct comparisons. For the migration process, drivers and other modules must first be changed so that they use the inline comparison functions.
2020-08-31 13:10:28 +02:00
Benjamin Valentin
3e8d6388f8
netdev_ieee802154: use eui_provider in netdev_ieee802154_setup()
2020-08-30 23:43:57 +02:00
benpicco
a0bae383d7
Merge pull request #14818 from Nishchay-sopho/drivers/sps30/add_sleep_mode
...
drivers/sps30: Add sleep mode
2020-08-25 23:49:32 +02:00
Nishchay-sopho
a368b0bc36
drivers/sps30: Add sleep mode
2020-08-25 16:20:18 +02:00
9b2aa40e03
Merge pull request #14038 from benpicco/mtd_pagewise
...
mtd: add page addressed operations to allow access > 4GiB on SD cards
2020-08-25 13:10:20 +02:00
Marian Buschsieweke
92ae260617
Merge pull request #14778 from benpicco/sys/luid_netdev
...
sys/luid: add luid_netdev_get_eui48() & luid_netdev_get_eui64()
2020-08-21 21:30:14 +02:00
Benjamin Valentin
d29397cfd8
netdev_ieee802154: add netdev_ieee802154_setup()
2020-08-21 15:33:19 +02:00
6199ada6b5
drivers/sx127x: migrate to ztimer
2020-08-20 13:41:32 +02:00
Benjamin Valentin
02f37b998a
drivers/at24cxxx: export page-wise write function
...
Export the _write_page() function so it can be used by the MTD subsystem.
2020-08-18 17:25:40 +02:00
Benjamin Valentin
7c8fe862ce
drivers/at25xxx: export page-wise write function
...
Export the _write_page() function so it can be used by the MTD subsystem.
2020-08-18 17:25:40 +02:00
Benjamin Valentin
4034f96169
mtd: add page addressed operations
...
Currently read(), write() and erase() all use 32 bit addressing.
This is a problem when writing to media > 4 GiB, e.g. SD cards.
The current implementation would wrap around after 4 GiB and corrupt data.
To avoid this, add functions to the MTD subsystem that allow for page-wise
addressing. This is how most of the underling storage drivers and the
file-systems above work anyway.
In the future we should then deprecate the 32-bit functions if all drivers
are converted.
2020-08-18 17:25:39 +02:00
Benjamin Valentin
1582b105d3
drivers/at86rf2xx: fix typo
2020-08-17 22:53:51 +02:00
Benjamin Valentin
decadc41a0
drivers/dose: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
4f19b54b7b
drivers/at86rf215: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
53eedc283b
drivers/at86rf2xx: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
7ceb3f0a68
netdev: add netdev_register() to keep track if netdev IDs
...
It is desireable to have a way to identify network devices.
This should be independent from the type of netdev, so a common identifier is needed.
Base this on the driver ID and the index in the configuration struct.
This way we achive unique IDs that stay consistent for any firmware flashed on a board.
2020-08-17 22:50:18 +02:00
Nishchay-sopho
3245dee8d8
drivers/sps30: Update units of measurement
2020-08-12 12:50:35 +02:00
Francisco
ad3568be87
Merge pull request #14712 from benpicco/gpio_init_int-clarify
...
periph/gpio: clarify behavior of gpio_irq_enable()
2020-08-11 11:30:05 +02:00
Benjamin Valentin
7543e714c1
drivers/periph_common: RTC: move RIOT_EPOCH to header, document it.
2020-08-07 13:22:19 +02:00
Benjamin Valentin
8c95198cbb
periph/gpio: clarify behavior of gpio_irq_enable()
...
What happens with events that occured after `gpio_irq_disable()` is
currently not defined.
If they are not cleared, they will generate an interrupt on `gpio_irq_enable()`.
This does not seem like the intended behavior, so make the documentation more
explicit.
2020-08-05 17:41:27 +02:00
José Alamos
7967066f51
Merge pull request #14657 from maribu/netdev_doc
...
drivers/net: Fix netdev_driver_t doc
2020-08-04 10:49:24 +02:00
Benjamin Valentin
aa0e5e7afa
drivers/cc110x: replace binary constants and use unsigned char
...
binary constants are a GCC extension
2020-07-31 13:38:03 +02:00
Benjamin Valentin
2e34298265
drivers/nrf24l01p: use unsigned char
2020-07-31 13:38:03 +02:00
Marian Buschsieweke
86513dc97a
drivers/net: Fix netdev_driver_t doc
...
- Fix indent
- Use @reval instead of @return when referring to a single return value
- Use term "frame" instead of "packet"
2020-07-30 20:22:17 +02:00
4b4e9830b0
drivers/touch_dev: clarify touch position coordinates origin
2020-07-29 14:49:17 +02:00
388bbfa008
drivers: add generic screen wrapper around display and touch devices
2020-07-29 14:30:03 +02:00
benpicco
7acdecb1df
Merge pull request #14447 from Nishchay-sopho/drivers/scd30
...
driver/scd30 : Add driver for scd30 sensor
2020-07-28 12:41:58 +02:00
benpicco
ecab75b529
Merge pull request #13632 from benpicco/cpu/sam0_common/uart-deinit
...
drivers/periph/uart: add periph_uart_reconfigure feature & implementation for sam0
2020-07-28 11:12:19 +02:00
nagrawal
900e4b61dc
driver/scd30: Add driver for Sensirion SCD30
...
Created tests for Sensirion scd30 driver
Moved Makefile.dep and Makefile.include as per new spec
2020-07-28 10:38:01 +02:00
Benjamin Valentin
3eb54179ae
drivers/periph/uart: add periph_uart_reconfigure feature
2020-07-28 10:10:15 +02:00
Benjamin Valentin
7af8a3e2d3
drivers/periph/timer: add note about TIM_FLAG_RESET_ON_MATCH
2020-07-27 17:17:08 +02:00
Francisco
d187e83221
Merge pull request #14570 from fjmolinas/pr_fix_mock_rtt_defs
...
drivers/rtt: override RTT_MAX_VALUE and RTT_FREQUENCY for mock
2020-07-22 16:33:29 +02:00
Francisco Molina
9dde6ec53d
drivers/rtt: overrite RTT_MAX_VALUE and RTT_FREQUENCY for mock
...
mock_rtt relies on setting mock values for RTT_MAX_VALUE and
RTT_FREQUENCY. Platforms with a rtt will already define these
values which leads to mock_rtt working with different values than
rtt_rtc.
This commit changes the ifdef logic so that when using mock_rtt
RTT_MAX_VALUE and RTT_FREQUENCY are redefined.
2020-07-22 08:52:54 +02:00
Akshai M
60170971bd
net/l2filter : Update documentation
2020-07-22 00:26:09 +05:30
Akshai M
caab4cd8c5
net/l2filter : Move 'L2FILTER_LISTSIZE' to 'CONFIG_'
2020-07-22 00:26:09 +05:30
Hendrik van Essen
9d068d582a
drivers/pca9633: make enum anonymous
2020-07-17 15:05:32 +02:00
Benjamin Valentin
b080d3da7a
drivers/soft_uart: implement inverted TX & RX
...
In the current implementation, RX is flank based, so it's entirely level
agnostic.
I still chose to include a SOFT_UART_FLAG_INVERT_RX flag for symmetry and
to allow for a possible future, sampling based implementation.
2020-07-14 23:04:36 +02:00
Benjamin Valentin
96c67b0fa5
drivers/soft_uart: add software based UART implementation
2020-07-14 22:51:59 +02:00
Francisco
325b7a8d8e
Merge pull request #13631 from benpicco/cpu/sam0_common/spi-deinit
...
drivers/periph/spi: add periph_spi_reconfigure feature & implementation for sam0
2020-06-30 15:34:53 +02:00
Leandro Lanzieri
955efd85ff
drivers/at: Add at_urc_isr module to process URCs upon arrival
2020-06-30 11:41:13 +02:00
benpicco
a92dac5701
Merge pull request #14329 from Nishchay-sopho/drivers/sdp3x
...
driver/sdp3x : Add driver for sdp3x sensor
2020-06-29 21:16:39 +02:00
Dirk Ehmen
05980765f2
drivers/sdp3x: Driver for sensirion sdp3x sensor
2020-06-29 20:50:41 +02:00
