There are new pseudomodules for this driver:
- atwinc15x0_static_connect: Should behave as before, by trying to connect to an AP
by specified WIFI_SSIS and WIFI_PASS
- atwinc15x0_dynamic_connect: takes connection request via NETOPT_CONNECT
and provides the connection result via callback
- atwinc15x0_dynamic_scan: takes network scan requests via NETOPT_SCAN
and provides the scan result as a sorted list via callback
19764: drivers/shield_w5100: add module for the W5100 Ethernet Shield r=benpicco a=maribu
### Contribution description
This module provides no more than the correct configuration parameters for the `w5100` driver using the Arduino I/O mapping features. But by doing so, it will work out of the box with every mechanically and electrically compatible board for which the Arduino I/O mapping features are implemented.
19781: cpu/nrf{53,9160}: add pwm support r=benpicco a=dylad
### Contribution description
This PR moves the nRF52 PWM driver to `cpu/nrf5x_common` to allow nRF9160 and nRF53 to use this driver.
IP is identical on these families.
I didn't test on nRF9160DK and I didn't test if there is any regression on nRF52-based board as I don't have any so tests are welcome !
However it works fine on nRF53-based board.
### Testing procedure
Flash the `tests/periph/pwm` test application on `nrf5340dk` or `nrf9160dk`.
You can then use the `osci` command to make the onboard LEDs "breath".
You can also attach an oscilloscope and/or logic analyzer to watch the signal.
### Issues/PRs references
~~Based on #19769~~
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: dylad <dylan.laduranty@mesotic.com>
This module provides no more than the correct configuration parameters
for the `w5100` driver using the Arduino I/O mapping features. But
by doing so, it will work out of the box with every mechanically and
electrically compatible board for which the Arduino I/O mapping
features are implemented.
19712: cpu/riscv: Add PMP driver r=MrKevinWeiss a=Teufelchen1
### Contribution description
Hi! 🐘
this adds a basic RISC-V physical memory protection (PMP) driver to RIOT. Well, 'driver' might be a stretched, feels more like a little utility :)
EDIT: Also added a no-execute RAM option for the hifive & a corresponding test
Since I only have an Hifive rev b, it's only enabled on this board / cpu. I also tested the code on an ESP32-C but the feature can't be enabled there, as `cpu/riscv_common/` is not used by the ESP32...
### Testing procedure
* Grab a hifive rev b
* go to `examples/hello-world`
* Add `USEMODULES += periph_pmp` to the `Makefile`
* Include `pmp.h` in `main.c`
* Add code e.g. `print_pmpcfg(0);`
* compile & flash & term
You should see something like this:
```
# Hello World!
# You are running RIOT on a(n) hifive1b board.
# This board features a(n) fe310 MCU.
# pmp00cfg: - R-X OFF 0x00000000 - 0x00000000
```
Co-authored-by: Teufelchen1 <bennet.blischke@outlook.com>
This allows using the arduino_pwm feature (which is translated into a
module) without the arduino module; e.g. for only using the Arduino
I/O mapping but not the Arduino API.
