This fixes an alignment issue I encountered in the static version of
the packet buffer.
The bug is caused by a race-condition where a certain order of
operations leads to a chunk being released according to the
byte-alignment of the platform, but overlapping potential space for
a future `_unused_t` struct e.g. (x mark allocated regions):
Future leak of size sizeof(_unused_t) Time
v |
+------------+-----+--------------------+ |
|xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx| +
+------------+-----+--------------------+ |
|
+------------+--+--+--------------------+ |
| |xxxxxxxxxxxxxxxxxxxxxxx| +
+------------+--+--+--------------------+ |
|
+-----+------+--+--+--------------------+ |
|xxxxx| |xxxxxxxxxxxxxxxxxxxxxxx| +
+-----+------+--+--+--------------------+ |
|
+-----+------+-----+---------+----------+ |
|xxxxx| |xxxxxxxxxx| +
+-----+------+-----+---------+----------+ |
|
+-----+------+-----+--------------------+ |
|xxxxx| |xxxxxxxxxxxxxxxxxxxxxxxxxx| +
+-----+------+-----+--------------------+ |
|
+------------+-----+--------------------+ |
|xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx| +
+------------+-----+--------------------+ |
|
+------------+-----+--------------------+ |
|xxxxxxxxxxxxxxxxxx| | +
+------------+-----+--------------------+ |
|
+------------+-----+--------------------+ |
| |xxxxx| | +
+------------+-----+--------------------+ |
v
Sadly, I wasn't able to create a reproducable unittest that show-cases
this corner-case, since I don't understand the order of operations that
cause this one 100%, but the bug is reproducable (but also not
reliably) by sending large (i.e. fragmented) packets to a 6Lo-enabled
host from more than 1 host simultaneously (use `gnrc_pktbuf_cmd` to
check).
By making the size of `_unused_t` the only condition for alignment,
this bug is fixed.
- Use RIOT's GPIO interface to access the sensor to increase portability
- Changed API to allow more than one sensor per board
- Added `sht1x_params.h` that specifies how the sensors is connected - each
board can overwrite default settings by #defining SHT1X_PARAM_CLK and
SHT1X_PARAM_DATA
- Changed arithmetic to use integer calculations only instead of floating point
arithmetic
- Added support for checking the CRC sum
- Allow optional skipping of the CRC check to speed up measuring
- Added support for advanced features like reducing the resolution and skipping
calibration to speed up measuring
- Allow specifying the supply voltage of sensor which heavily influences the
temperature result (and use that information to calculate the correct
temperature)
- Reset sensor on initialization to bring it in a well known state
- Support for the obscure heater feature. (Can be useful to check the
temperature sensor?)
- Updated old SHT11 shell commands to the new driver interface, thus allowing
more than one SHT10/11/15 sensor to be used
- Added new shell command to allow full configuration of all attached SHT1x
sensors
- Removed old command for setting the SHT11 temperature offset, as this feature
is implemented in the new configuration command
The sensor family SHT10, SHT11 and SHT15 only differ in their accuracy (as in
calibration, not as in resolution). Thus, the same driver can be used for all.
The new driver name better reflects this fact.
This refactors the `gnrc_sixlowpan_frag` module for the API proposed
in #8511.
The `ctx` for `gnrc_sixlowpan_frag_send()` is required to be a
`gnrc_sixlowpan_msg_frag_t` object, so IPHC can later on use it to
provide the *original* datagram size (otherwise, we would need to adapt
the API just for that, which seems to me as convoluted as this
proposal).
I also provide an expose function with a future possibility to provide
more than just one `gnrc_sixlowpan_msg_frag_t` object later on (plus
having cleaner module separation in general).
I'm using something like this command for a while now for debugging
GNRC. Usually, I just patch it into the application I'm using it with,
but I think there is a benefit to also provide it to RIOT upstream
properly.
This change allows the port for local endpoint to be zero 0. If this is
the case the `sock_udp_create()` function binds the object to an
ephemeral port.
While working on #9352 I noticed that the order of members in the
`gnrc_sixlowpan_msg_frag_t` struct costs us 4 bytes in RAM due to byte
alignment. This PR fixes the order of members, so they are the most
packed.
This exposes the parts of the reassembly buffer to be usable as context
as proposed in #8511.
I only exposed *parts of* for two reasons:
1. I don't need to expose further types (like `rbuf_int_t`), that are
not of interest outside of fragmentation.
2. This allows for an easy future extension for the virtual reassembly
buffer as proposed in [[1]].
This makes this change a little bit more involved, because instead of
just renaming the type, I also need to add the usage of the `super`
member, but I think in the end this little preparation work will be
beneficial in the future.
[1]: https://tools.ietf.org/html/draft-watteyne-6lo-minimal-fragment-01#section-3
The include/crypto path should include 'sys' to be vavil
But all source files are already using '#include "crypto/HEADER.h"' so it does
not need fixing.
Add small stubs for _times_r and _link_r so that code using times()
or link() can still compile. The functions are marked as not implemented
and return invalid codes.
