19487: nanocoap: implement extended tokens (RFC 8974) r=benpicco a=benpicco
19808: boards: add ESP32-S3-USB-OTG support r=benpicco a=gschorcht
### Contribution description
This PR provides the support for the [ESP32-S3-USB-OTG](https://docs.espressif.com/projects/espressif-esp-dev-kits/en/latest/esp32s3/esp32-s3-usb-otg/user_guide.html) board.
The SD card can only be used in SPI mode at the moment. As soon as PR #19786 is merged, the SD/MMC support can be enabled and the SD card can then be used in SD mode with 4-bit data bus width.
The display uses uses the ST7789 driver IC that is compatible with the ST7735. For that purpose the ST7735 driver is extended by a pseudomodule definition `st7789` for the ST7789 which is enabled by the board and enables automatically the `st7789` (e57c48a33ee2a869c15603788e5306ba066f91cf). Vise versa, board's `Makefile.dep` enables automatically the `st7789` pseudomodule if the `st7735` is used. The pseudomodule `st7789` is just used to increase the upper limit for supported lines. This change is also part of PR #19807.
~The PR includes a very small documentation fix for ESP32-S3-DevKit board that was noticed during the development of this board definition (1155b6ac1b8efa39d8a0bd7150e602095159fdc1).~
### Testing procedure
The board has been tested with all basic tests for supported hardware including `tests/driver/st3375`:
- [x] tests/drivers/st3375
- [x] tests/periph/gpio
- [x] tests/periph/pwm
- [x] tests/periph/spi
- [x] tests/periph/uart
- [x] tests/sys/usbus_cdc_ecm
### Issues/PRs references
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19212: shell/rtc: use rtc_tm_normalize() to sanitize input r=benpicco a=benpicco
19360: gcoap: make use coap_build_reply() in gcoap_resp_init() r=benpicco a=benpicco
19401: shell/cmds: add genfile command r=benpicco a=benpicco
19645: sys/isrpipe: Replace xtimer with ztimer_usec r=benpicco a=MrKevinWeiss
### Contribution description
Getting ready for the xtimer dep.
### Testing procedure
Green murdock, there is no explicit test for isrpipe but since it runs xtimer compat it should operate the same.
### Issues/PRs references
19720: tests: remove unnecessary use of floating point r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: MrKevinWeiss <weiss.kevin604@gmail.com>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
18620: core: add core_mutex_debug to aid debugging deadlocks r=maribu a=maribu
### Contribution description
Adding `USEMODULE += core_mutex_debug` to your `Makefile` results in
on log messages such as
[mutex] waiting for thread 1 (pc = 0x800024d)
being added whenever `mutex_lock()` blocks. This makes tracing down
deadlocks easier.
### Testing procedure
Run e.g.
```sh
USEMODULE=core_mutex_debug BOARD=nucleo-f767zi make -C tests/mutex_cancel flash test
```
which should provide output such as
```
Welcome to pyterm!
Type '/exit' to exit.
READY
s
[mutex] waiting for thread 1 (pc = 0x8000f35)
START
main(): This is RIOT! (Version: 2022.10-devel-841-g5cc02-core/mutex/debug)
Test Application for mutex_cancel / mutex_lock_cancelable
=========================================================
Test without cancellation: OK
Test early cancellation: OK
Verify no side effects on subsequent calls: [mutex] waiting for thread 1 (pc = 0x800024d)
OK
Test late cancellation: [mutex] waiting for thread 1 (pc = 0x0)
OK
TEST PASSED
```
```sh
$ arm-none-eabi-addr2line -a 0x800024d -e tests/mutex_cancel/bin/nucleo-f767zi/tests_mutex_cancel.elf
0x0800024d
/home/maribu/Repos/software/RIOT/tests/mutex_cancel/main.c:51
```
### Issues/PRs references
Depends on and includes https://github.com/RIOT-OS/RIOT/pull/18619
19296: nanocoap: allow to define CoAP resources as XFA r=maribu a=benpicco
19504: cpu/cc26xx_cc13xx: Fix bogus array-bound warning r=maribu a=maribu
### Contribution description
GCC 12 create a bogus array out of bounds warning as it assumes that because there is special handling for `uart == 0` and `uart == 1`, `uart` can indeed be `1`. There is an `assert(uart < UART_NUMOF)` above that would blow up prior to any out of bounds access.
In any case, optimizing out the special handling of `uart == 1` for when `UART_NUMOF == 1` likely improves the generated code and fixes the warning.
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:88:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
88 | ctx[uart].rx_cb = rx_cb;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:89:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
89 | ctx[uart].arg = arg;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
### Testing procedure
The actual change is a pretty obvious one-liner, so that code review and a green CI should be sufficient. If not, running any UART example app without regression should do.
### Issues/PRs references
None
19506: tools/openocd: Fix handling of OPENOCD_CMD_RESET_HALT r=maribu a=maribu
### Contribution description
The OPENOCD_CMD_RESET_HALT was not longer correctly passed to the script. This fixes the issue.
### Testing procedure
Flashing of e.g. the `cc2650-launchpad` with upstream OpenOCD should work again.
### Issues/PRs references
The change was added to https://github.com/RIOT-OS/RIOT/pull/19050 after testing the PR and before merging. I'm not sure if the fix never worked because of this, or if behavior of `target-export-variables` or GNU Make changed.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19383: cord: include gcoap_req_send returning 0 in error r=benpicco a=bergzand
### Contribution description
gcoap_req_send returns 0 if it was unable to send the CoAP request. CoRD did not include that case in the return code checks. This changes CoRD to include it and drop the registration if CoAP could not send the request. The old behaviour made the CoRD thread lock up.
### Testing procedure
- Check with the gcoap API docs.
- I can reliable trigger the issue with a RIOT application including both the `cord_ep_standalone` module and some measurement reported both sending requests to the same application. If at some point the application is shut down, gcoap has all its memo's occupied with the measurement reporting and can't add the CoRD update request. Thus the CoRD update request fails with a zero code and the thread (previously) would lock up.
### Issues/PRs references
None
19385: cpu/stm32/periph/timer: fix clobered IRQ flag r=benpicco a=Enoch247
### Contribution description
From the git commit:
> The STM32 periph_timer driver reads the timer's status flags, then clears them all. It is possible that a timer interrupt could occur between reading the flag and clearing it. This would lead to a lost interrupt.
>
> The timer's status flags can be cleared by software, but can only be set by the hardware. This patch takes advantage of this by only clearing the flags it knows are set. The rest of the flags are set, which doesn't actually change their state.
I had trouble finding anything in ST's datasheet saying that software could not set the timer's status flags, but testing showed that this is how it works in practice. Further, [ST's own HAL ](https://github.com/STMicroelectronics/STM32CubeF4/blob/master/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h#L1258)confirms this. If the hardware didn't work this way, it would be impossible to atomically read-modify-write the flags.
### Testing procedure
I tested by doing the following:
1. `make -C tests/periph_timer BOARD=nucleo-f767zi all flash term`
2. press s
3. press [ENTER]
4. observe test passes
5. `make -C tests/periph_timer_periodic BOARD=nucleo-f767zi all flash term`
6. press s
7. press [ENTER]
8. observe test passes
9. `make -C tests/periph_timer_short_relative_set BOARD=nucleo-f767zi all flash term`
10. press s
11. press [ENTER]
12. observe test passes
### Issues/PRs references
- none known
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
gcoap_req_send returns 0 if it was unable to send the CoAP request. CoRD
did not include that case in the return code checks. This changes CoRD
to include it and drop the registration if CoAP could not send the
request. The old behaviour made the CoRD thread lock up.
19365: bootloaders: fix bootloader button logic r=benpicco a=dylad
### Contribution description
In lastest master, the `BTN_BOOTLOADER_INVERTED` logic doesn't work as expected.
This PR fixes the underlying logic by replacing the `BTN_BOOTLOADER_INVERTED` macro definition by a runtime function.
In fact the current code:
```
#ifndef BTN_BOOTLOADER_INVERTED
#if (BTN0_MODE == GPIO_IN_PD)
#define BTN_BOOTLOADER_INVERTED false
#else
#define BTN_BOOTLOADER_INVERTED true
#endif
#endif
```
cannot work because both `BTN0_MODE` and `GPIO_IN_PD` are not known by the precompiler as they are enum values defined at cpu level.
Thus, replaces it by a runtime function in our bootloader applications.
I've also add `GPIO_OD_PU` along side `GPIO_IN_PU` and add a new define (which can be override at board level or app level) in case an external pullup is used.
### Testing procedure
Flash the riotboot_dfu bootloader:
`make BOARD=saml21-xpro -C bootloaders/riotboot_dfu flash`
Then, flash any test app:
`PROGRAMMER=dfu-util USEMODULE=usbus_dfu make BOARD=saml21-xpro -C tests/shell riotboot/flash-slot0`
With master, the application will not start.
With this PR, the application will start after flashing.
### Issues/PRs references
Fixes#19364
19366: nanocoap_sock: don't include token in empty ACK response r=benpicco a=benpicco
19367: cord: bump reference from draft to rfc r=benpicco a=bergzand
### Contribution description
The draft is an RFC, this bumps the "see also" in the docs to the rfc.
### Testing procedure
Check that the correct RFC is linked in the docs.
### Issues/PRs references
None
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
This is an API change in the latter, which would typically now take an
extra argument GCOAP_SOCKET_TYPE_UNDEF.
Follow-Up-For: https://github.com/RIOT-OS/RIOT/pull/16688
19142: sock_dtls: move common code into sock_dtls_establish_session() r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
18773: nanocoap_sock: fix handling empty ACKs with separate response r=maribu a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
