Engineering sample A doesn't have a functional USB peripheral (errata
issue 94). This commit adds an assertion check for this revision to
prevent some developer headaches.
before this commit the src address was checked for multicast, but the dst address should be checked. Therefore udp multicast packets would be flooded back to the src as ICMPv6 error, as not all nodes had a UDP receiver registered.
Instead of having a send buffer as member `esp_wifi` netdev, a local variable is used now as send buffer. This avoids the need for a locking mechanism and reduces the risk of deadlocks.
Receive call back function `_esp_wifi_rx_cb` is called from WiFi hardware driver with a pointer to a frame buffer that is allocated in the WiFi hardware driver. This frame buffer was freed immediately after copying its content to a single local receive buffer of the `esp_wifi` netdev. The local receive buffer remained occupied until the protocol stack had processed it. Further incoming packets were dropped. However, very often a number of subsequent WiFi frames are received at the same time before the first one is processed completely. Having the single local receive buffer to hold only one received frame, led to a number of lost packets, even at low network load. Therefore, a ringbuffer of rx_buf elements was introduced which doesn't store the frames directly but only references to the frame buffers allocated in WiFi hardware driver. Since there is enough memory to hold several frames, the frames buffers allocated in WiFi hardware driver aren't freed immediatly any longer but are kept until the frame is processed by the protocol stack. This results in a much less loss rate of packets.
Events of different type can be pending at the same time. Therefore it is not possible to use ascending identifiers for the presence of a pending event. Rather, each event type has to be represented by one bit. Thes bits ORed identify all types of pending events. In the esp_wifi_isr function all pending events are then handled in one call. Otherwise, some events might be lost.
The Atlas Scientific pH OEM sensor is a small circuit to be embedded in
end products to measure the pH value with any commercially available pH
electrode
Replaces the special heap command approach of the lpc_common module with a more general heap command approach. Module lpc_common was already removed with PR #2118. PR #2118 integrated cpu/lpc_common code in cpu/lpc2387. With PR #3530 special heap handling for cpu/lpc2387 was replaced by newlib memory management which uses _sbrk_r to allocate chunks from the heap. _sbrk_r uses _sheap and _eheap symbols that are defined in lpc2387.ld and can be used together with mallinfo function for heap statistics.
- Serial.print() and Serial.println() have been extended to support:
- unsigned int
- long
- unsigned long
- The SerialFormat BIN has been implemented
- Serial.println(void) has been added
Using flash size in megabits is deprecated by esptool.
Use the new megabyte notation.
WARNING: Flash size arguments in megabits like '8m' are deprecated.
Please use the equivalent size '1MB'.
Megabit arguments may be removed in a future release.
esptool.py v2.6
UART FIFO must contain only 1 byte when newlib's `printf` function is used. Otherwise, outputs that are still not sent over UART are lost when `printf` is called asynchronousely.
To avoid unresolved symbols for unused functions during linking, compiler option `-ffunction-sections` is used now. Linker option `--warn-unresolved-symbols` is removed to get errors if required symbols cannot be resolved.
The modules `newlib, `newlib_syscalls_default` and `stdio_uart` are now used by default for output to the UART interface. This also reduces the dependency rules.
