19299: Add missing newline to output of telnet example r=benpicco a=Enoch247
### Contribution description
From the commit msg:
> The telnet example prints a line to the console, but it is not ended with a newline. When using pyterm, the last line is then never shown as it reads the console line by line and is waiting for the end of the line.
>
> This patch swaps use of `printf` for `puts` for the last line printed. This means the missing newline character gets added. This is also done to be consistent with the rest of the file, where puts is used whenever possible instead of printf.
### Testing procedure
1. `cd examples/telnet`
2. `make all flash term`
3. observe the final line "Local shell disabled" is printed, but would not have without this patch
### Issues/PRs references
- none known
19301: fib: document unused state r=benpicco a=benpicco
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
19294: sys/shell: don't include suit command by default r=benpicco a=benpicco
19295: gcoap: Finish the gcoap_get_resource_list_tl -> gcoap_get_resource_list renaming r=benpicco a=chrysn
### Contribution description
In #16688, an argument was added to the `gcoap_get_resource_list` function by creating a new function `gcoap_get_resource_list_tl` with a deprecation and roll-over plan.
This plan has not been acted on so far.
This PR shortens the original plan by just adding the argument to `gcoap_get_resource_list` and removing `gcoap_get_resource_list_tl` in a single go. The rationale for this deviation is that while it's a public API, its only two practical consumers are the (built-in) well-known/core implementation, and the (built-in) CoRE Resource Directory (cord) endpoint. Moreover, a further change to this API (switching over to `coap_block_slicer_t`) is expected to happen within this release cycle, which would take something like 4 total releases to get through otherwise, which is unrealistic for an API that there are no known external users of.
A second commit clean up ToDo items (in the changed function's documentation) that referred to a IETF draft that has long been abandoned by the CoRE WG.
### Testing procedure
Plain inspection and CI passing should suffice.
### AOB
There is a second analogous pair left over from #16688, `gcoap_req_send` / `gcoap_req_send_tl`. As that *is* expected to be used widely, I prefer not to mix these two concerns, and get the present one through without unnecessary hold-up.
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: chrysn <chrysn@fsfe.org>
This is an API change in the latter, which would typically now take an
extra argument GCOAP_SOCKET_TYPE_UNDEF.
Follow-Up-For: https://github.com/RIOT-OS/RIOT/pull/16688
19278: gnrc_dhcpv6_client_simple_pd: select upstream based on type/index r=benpicco a=benpicco
19290: sys/crypto: make AES_KEY struct private & rename it r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
19142: sock_dtls: move common code into sock_dtls_establish_session() r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
18472: drivers/mrf24j40: add support for IEEE 802.15.4 Radio HAL r=benpicco a=jia200x
19175: drivers/periph_common/flashpage: fix silent error r=benpicco a=Enoch247
### Contribution description
This patch removes a test that silently hides failed writes to NULL. Instead, assert is used to ensure that the address is not NULL.
### Testing procedure
I am not certain how to update the tests to catch asserts. If this is possible, I will add a test, if someone will point me to a good example to learn from.
### Issues/PRs references
- none
Co-authored-by: Jose Alamos <jose@alamos.cc>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
18477: gnrc_static: add static network configuration r=miri64 a=benpicco
19101: CI: update check-labels-action r=miri64 a=kaspar030
19155: Revert "sys/pm_layered: pm_(un)block add attribute optimize(3)" r=maribu a=Teufelchen1
Revert "sys/pm_layered: pm_(un)block add attribute optimize(3) -shortens hotpath"
This reverts commit 5447203921.
### Contribution description
Compiling `examples/gnrc_networking_mac` using `TOOLCHAIN=llvm` yields the following error:
```
RIOT/sys/pm_layered/pm.c:77:16: error: unknown attribute 'optimize' ignored [-Werror,-Wunknown-attributes]
__attribute__((optimize(3)))
```
As indicated, this is because the attribute `optimize` is GCC only and not present in LLVM.
Compare the manpages of [GCC](https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html) and [LLVM](https://clang.llvm.org/docs/AttributeReference.html).
### Testing procedure
Since this should only affect performance and not behavior, no special testing is needed. I am not aware of any tests in RIOT which could verify that assumption.
### Issues/PRs references
Introduced in #18846
There is another instance of this attribute being used in[ shell_lock.c](6fb340d654/sys/shell_lock/shell_lock.c (L80)). Since the usage is security related, I omit it from this PR.
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
Co-authored-by: Teufelchen1 <bennet.blischke@haw-hamburg.de>
18752: nanocoap_sock: deprecate nanocoap_get() r=benpicco a=benpicco
19100: cpu/esp_common: allow configuration of UART0 r=benpicco a=gschorcht
### Contribution description
This PR
- fixes the issue for ESP32 SoCs that UART0 signals can't be routed to arbitrary GPIOs and
- allows the configuration of the UART device used by the bootloader.
The UART interface and its configuration used by the STDIO are defined in RIOT using the define `STDIO_UART_DEV` and the configuration of the corresponding UART device in `periph_conf.h`.
However, the bootloader compiled directly in ESP-IDF uses its own definitions `CONFIG_ESP_CONSOLE_UART_*` for the UART configuration. To be able to use a consistent UART configuration in RIOT and the bootloader, e.g. to see the output of the 2nd stage bootloader, these `CONFIG_ESP_CONSOLE_UART_*` can be defined via a set of KConfig variables in RIOT (not yet implemented in Kconfig):
- `CONSOLE_CONFIG_UART_NUM` defines the UART device to be used by the bootloader and by `STDIO_UART_DEV`
- `CONSOLE_CONFIG_UART_RX` and `CONSOLE_CONFIG_UART_TX` define the GPIOs to be used by the bootloader and should be the GPIOs as defined in `periph_conf.h` for the corresponding UART device.
### Testing procedure
Any ESP32 node should still work with `stdio_uart` and the default configuration. To test an alternative configuration, use
```
CFLAGS='-DUART1_TXD=5 -DUART1_RXD=4 -DCONFIG_CONSOLE_UART_NUM=1 -DCONFIG_CONSOLE_UART_TX=5 -DCONFIG_CONSOLE_UART_RX=4' USEMODULE=esp_log_startup BOARD=esp32-wroom-32 make -C tests/shell flash
```
The bootloader output and the STDIO should be routed to UART1 at GPIO4 and GPIO5.
### Issues/PRs references
Prerequisite for PR ##18863
19104: tests/periph_uart: only exclude STDIO_UART_DEV if stdio_uart is used r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
18773: nanocoap_sock: fix handling empty ACKs with separate response r=maribu a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
The previous implementation used creative construct for impedance
mismatching between the core list API (which returns a ptr to the
removed element if found) and the GNRC pkt list API (which returns a
ptr to the new list head) that creates a temporary list head on the
stack.
I'm not entirely sure if the previous implementation is containing
undefined behavior that is used against us with GCC >= 12.x, or if this
is a compiler bug. In either case, not reusing the core list API here
and just having a textbook linked list delete function here is not much
less readable and fixes the issue for our users.
