0d4b55e0c8
Merge pull request #10654 from keestux/driver-rn2xx3-rx1delay
...
loramac: change rxdelay1 to millisec, was seconds
2019-01-03 11:24:17 +01:00
0ca4703dde
Merge pull request #10687 from kb2ma/nanocoap/remove_macro
...
net/nanocoap: remove obsolete macro
2019-01-03 11:00:52 +01:00
José Alamos
f14d46d935
Merge pull request #10242 from miri64/gnrc_ipv6_ext_rh/enh/icmpv6_error_msg
...
gnrc_ipv6_ext_rh: add ICMPv6 error message sending
2019-01-03 10:35:54 +01:00
Kevin "Bear Puncher" Weiss
2bf29dd99e
Merge pull request #10692 from aabadie/pr/boards/nucleo-f767_i2c
...
boards/nucleo-f767zi: use common STM32 i2c configuration
2019-01-03 10:17:44 +01:00
552909cf90
Merge pull request #10694 from MrKevinWeiss/pr/bh1750fix
...
drivers/bh1750: Fix mislabeled i2c address
2019-01-03 09:50:56 +01:00
Kevin "Bear Puncher" Weiss
fd15cb8f77
Merge pull request #10646 from aabadie/pr/boards/nucleo-f072-i2c
...
boards/nucleo-f072rb: configure I2C using common stm32 configuration
2019-01-03 09:48:57 +01:00
MrKevinWeiss
b870dbb3b9
drivers/bh1750: Fix mislabeled i2c address
...
The i2c address when the pin is high/low are swapped.
This swaps them to match the datasheet and changes the default to low.
2019-01-03 09:08:31 +01:00
Ken Bannister
5e9a2c0925
net/nanocoap: allow user to configure macros
2019-01-02 13:12:05 -05:00
Ken Bannister
5f8e993faf
net/coap: reference RFC for configurability
2019-01-02 12:54:12 -05:00
Ken Bannister
663bb5bb3d
net/coap: use separate name for macro doc
2019-01-02 12:54:12 -05:00
Ken Bannister
94660f4db7
net/coap: allow user to configure message retry macros
2019-01-02 12:54:12 -05:00
Kevin "Bear Puncher" Weiss
90b5865692
Merge pull request #10691 from aabadie/pr/boards/stm32_useless_defines
...
boards/stm32: remove useless empty conf defines
2019-01-02 17:00:30 +01:00
c0b1d37d73
boards/nucleo-f072rb: use common i2c configuration
2019-01-02 16:08:56 +01:00
f6985c5b31
cpu/stm32f0: update stm32f072xb CMSIS header
2019-01-02 16:08:56 +01:00
402f02d471
boards/nucleo-f767zi: use STM32 common i2c config
2019-01-02 16:06:34 +01:00
9a61febf5c
cpu/stm32f7: update stm32f767zi cmsis header file
2019-01-02 16:06:34 +01:00
Kevin "Bear Puncher" Weiss
24837e9f17
Merge pull request #10690 from aabadie/pr/boards/stm32_common_i2c_f0_f2
...
boards/stm32: factorize i2c configuration on stm32f0 and stm32f2 based nucleo boards
2019-01-02 16:05:36 +01:00
Kevin "Bear Puncher" Weiss
5fd304b5f5
Merge pull request #10588 from aabadie/pr/tests/bench_coreapis_pexpect_fix
...
tests/bench_runtime_coreapis: improve pexpect autotest
2019-01-02 15:06:51 +01:00
9a69c9bbc5
boards/stm32: remove useless empty conf defines
2019-01-02 14:52:38 +01:00
3eba44a660
boards/nucleo-f0207zg: use common clock and i2c configuration
2019-01-02 14:29:26 +01:00
24bc5ae254
boards/nucleo-f0xx: use common i2c configuration
2019-01-02 14:23:46 +01:00
541fc7f93f
boards/stm32: add f2 common clock configuration
2019-01-02 14:23:46 +01:00
f90c69cf6e
tests/bench_runtime_coreapis: improve pexpect autotest
2019-01-02 14:22:37 +01:00
4e7bfb65df
tests/bench_runtime_coreapis: globally import testrunner
2019-01-02 14:22:28 +01:00
Kevin "Bear Puncher" Weiss
02ec3845de
Merge pull request #9728 from aabadie/pr/boards/stm32_common_i2c
...
boards: factorize some nucleo f4/f7/l4 i2c configuration
2019-01-02 14:05:32 +01:00
536e4a55a8
boards/nucleo-l496zg: provide and configure i2c
2019-01-02 11:27:42 +01:00
ed6dcfe872
boards/nucleo-f746zg: provide and configure i2c
2019-01-02 11:27:25 +01:00
4fd4ce4c54
boards/nucleo-f722/l476: use common i2c configuration
2019-01-02 11:26:54 +01:00
f8d8ddb1ef
boards/stm32: adapt common i2c config to f7 and l4
2019-01-02 11:25:32 +01:00
0d6af64a15
Merge pull request #10647 from aabadie/pr/boards/nucleo-l422rc-i2c
...
boards/nucleo-l433rc: add I2C configuration
2019-01-02 11:01:17 +01:00
b81941f953
boards/nucleo-f4**: use common clock and I2c configuration
2019-01-02 10:30:13 +01:00
08608c350c
boards/stm32: add common I2C configuration
...
This configuration provides 1 I2C using I2C1 on PB8 and PB9, which is very common for STMs
2019-01-02 10:30:13 +01:00
11da5036fb
boards/stm32: add new common clock configurations
2019-01-02 10:30:13 +01:00
824201b9ea
boards/nucleo-l433rc: add I2C configuration
2019-01-02 10:19:46 +01:00
Kevin "Bear Puncher" Weiss
7f179cd0bf
Merge pull request #10689 from aabadie/pr/boards/st_adc_numof_cleanup
...
boards/stm32: remove unnecessary ADC defines in board config
2019-01-02 10:10:29 +01:00
973a6a4c93
boards/stm32: remove unnecessary ADC defines in board config
2019-01-02 09:15:22 +01:00
Ken Bannister
c17cf650ca
net/nanocoap: remove obsolete macro
2018-12-31 07:17:29 -05:00
Ken Bannister
03d4230d3a
net/gcoap: specify range for token length
2018-12-31 06:13:55 -05:00
Bas Stottelaar
7372074223
cpu: efm32: update vendor headers
2018-12-30 23:35:57 +01:00
Bas Stottelaar
af7f3544a8
pkg: gecko_sdk: update to v2.5
2018-12-30 23:35:57 +01:00
Martine Lenders
c6150d3b35
gnrc_ipv6: make gnrc_netapi documentation more detailed
2018-12-30 19:24:24 +01:00
Ken Bannister
beae37cf18
net/gcoap: retitle documentation group
...
Avoids confusion with generic CoAP and capitalization retains order
in documentation.
2018-12-30 10:45:35 -05:00
Ken Bannister
3467994896
net/gcoap: add config macros to config doc group
2018-12-30 10:45:35 -05:00
Gunar Schorcht
d3f78a5a40
Merge pull request #10679 from miri64/gnrc_sixlowpan_frag/fix/send-check-msg-queue
...
gnrc_sixlowpan_frag: check if own message queue is full
2018-12-30 15:48:26 +01:00
Gunar Schorcht
934c4225d2
Merge pull request #10680 from miri64/gnrc_sixlowpan_frag/fix/rbuf-full-release
...
gnrc_sixlowpan_frag: release packet rbuf_add error cases
2018-12-30 15:47:59 +01:00
Martine Lenders
e8da744e6d
gnrc_sixlowpan_frag: release packet when frag hdr can't be marked
...
Otherwise, there will be leaks ;-).
2018-12-30 01:05:34 +01:00
Martine Lenders
a409603f84
gnrc_sixlowpan_frag: release packet when rbuf is full
...
Otherwise, there will be leaks ;-).
2018-12-30 00:59:04 +01:00
Martine Lenders
9e3cdebae1
gnrc_sixlowpan_frag: check if own message queue is full
...
When issueing the sending of the next fragment the current version of
`gnrc_sixlowpan_frag` doesn't check if the queue is full. This leads to
leakage of the packet buffer, since when it is full, the package never
gets released.
This change adds a checks and error exits in case the queue is full.
2018-12-29 22:54:52 +01:00
Martine Lenders
d5bbf45d32
gnrc_sixlowpan_frag: reduce code duplication in send
2018-12-29 22:54:14 +01:00
Gunar Schorcht
a87c2c9563
Merge pull request #10675 from miri64/dist/enh/print-toolchain-version-xtensa
...
print_toolchain_versions.sh: add xtensa toolchains
2018-12-29 15:44:44 +01:00
