Joakim Gebart
9781ea99cc
drivers/hih6310: Initial commit of HIH6310 driver
...
Honeywell HumidIcon Digital Humidity/Temperature Sensors: HIH-6130/6131 Series
Only basic humidity and temperature measurement support is implemented.
Missing:
- Alarm interrupts
- Command mode (reconfigure i2c address, alarm levels, alarm polarity, custom ID)
2015-07-20 18:41:14 +02:00
Thomas Eichinger
c72f37a30b
Merge pull request #3174 from daniel-k/periph_rtt_conv
...
periph/rtt: add macros for time to tick conversion
2015-07-18 17:55:07 +02:00
Joakim Gebart
9292373720
at86rf231: Set AT86RF231_MIN_CHANNEL to 0 to support AT86RF212B
2015-07-14 20:23:14 +02:00
Joakim Gebart
b10e33dfc0
drivers/adt7310: Add ADT7310 temperature sensor driver
...
This is a driver for Analog Devices ADT7310 +/-0.5°C Accurate, 16-Bit
Digital SPI Temperature Sensor.
Only basic reading is supported. Interrupt and compare are not
implemented yet.
See: http://www.analog.com/en/products/analog-to-digital-converters/integrated-special-purpose-converters/integrated-temperature-sensors/adt7310.html
2015-07-09 23:39:32 +02:00
Joakim Gebart
c9bdbd1a74
lis3dh: Refactor, add INT1 handling, improve FIFO mode
2015-07-07 12:03:28 +02:00
daniel-k
bf40103a26
at86rf2xx: don't populate disabled interrupt flags to IRQ_STATUS
2015-07-01 17:16:30 +02:00
Martine Lenders
3238ccd47e
Merge pull request #3159 from authmillenon/ng_net/feat/iid
...
ng_net: add IID option and simplify upper layers accordingly
2015-07-01 12:47:49 +02:00
Hauke Petersen
350cfc7a2b
Merge pull request #3095 from haukepetersen/opt_gpio
...
drivers/gpio: changed periph driver interface
2015-06-15 13:57:03 +02:00
Martine Lenders
5ac2c61236
xbee: add NETCONF_OPT_IPV6_IID handler
2015-06-15 12:32:14 +02:00
Martine Lenders
d9ed439f03
ng_at86rf2xx: add NETCONF_OPT_IPV6_IID handler
2015-06-15 12:32:14 +02:00
Hauke Petersen
55e0362814
drivers/xbee: use GPIO_UNDEF instead of GPIO_NUMOF
2015-06-14 16:12:47 +02:00
Hauke Petersen
4a4ee44abc
drivers/gpio: added GPIO_UNDEF define
2015-06-14 16:12:20 +02:00
Jonas
404e7b1016
driver/kw2xrf: set HW-address according to CPUID; Correct broadcast handling
2015-06-13 22:30:04 +02:00
Hauke Petersen
2cc2d9f740
drivers: adjusted drivers to changed GPIO interface
2015-06-12 19:10:29 +02:00
Hauke Petersen
b49f11bed7
drivers/gpio: overhaul of the periph GPIO driver
...
- merged init_in and init_out
- renamed init_int to init_exti
- made datatypes overwritable
2015-06-12 19:09:32 +02:00
Hauke Petersen
6f2f716363
Merge pull request #3158 from authmillenon/xbee/enh/addr-len
...
xbee: make address length configurable
2015-06-12 14:34:21 +02:00
Martine Lenders
f4392f7661
xbee: make address length configurable
...
6LoWPAN-ND states [1] that the IPv6 address should be generated from the
EUI-64 of the interface, since it can be assumed as globally unique and
would not require duplicate address detection. Currently the xbee module is
not able to use any other address for short address with IPv6 since
NETCONF_OPT_SRC_LEN always returns 2. This patch fixes that.
[1] https://tools.ietf.org/html/rfc6775#section-5.2
2015-06-11 19:51:35 +02:00
daniel-k
80c13d109b
periph/rtt: add macros for time to tick conversion
2015-06-08 17:19:20 +02:00
Ludwig Ortmann
af5af90cba
drivers/dht: add support for DHT21
2015-06-06 17:08:47 +02:00
Hauke Petersen
f5ec1926e6
Merge pull request #3106 from gebart/pr/servo-updates
...
drivers/servo: Add test program, handle inexact frequencies
2015-06-04 12:08:06 +02:00
haukepetersen
4a19e255d7
drivers/ng_at86rf: disable ack req on bcast/mcast
2015-06-02 23:07:03 +02:00
Peter Kietzmann
6dc0e789e1
Merge pull request #3101 from gebart/pr/warning-fixes
...
Various warning fixes
2015-05-31 17:03:49 +02:00
Johann F
d317ea2d3a
drivers/hdc1000: fix hdc1000_startmeasure function
...
Change i2c_write_bytes to i2c_write_byte because it was
seriously wrong at this point.
2015-05-30 20:18:34 +02:00
Joakim Gebart
3ede02683c
drivers/servo: Handle inexact frequencies from periph_pwm
2015-05-30 12:41:07 +02:00
Joakim Gebart
1c855cb230
drivers/at86rf231: fix unused-parameter
2015-05-29 14:23:01 +02:00
Peter Kietzmann
c839e65479
Merge pull request #3025 from OlegHahm/netconf_retransmit
...
netconf: at86rf231: configure maximum retransmits
2015-05-29 10:10:56 +02:00
Ludwig Ortmann
4a05f47bcf
drivers/dht: initial import
...
Unified driver for DHT11 and DHT22.
2015-05-29 06:24:18 +02:00
Hauke Petersen
9943f51080
global: renamed cpu-conf.h into cpu_conf.h
2015-05-28 15:45:05 +02:00
Oleg Hahm
76e4c820e5
ng_netconf: ng_at86rf2xx: set retransmissions
...
Introduces a netconf option to configure the maximum amount of
retransmissions and implements this for the at86rf2xx radios.
2015-05-28 13:35:36 +02:00
Martine Lenders
e28a64f282
ng_at86rf2xx: add NETCONF_OPT_PROTO to _get
2015-05-26 15:25:37 +02:00
Joakim Gebart
13832d8e62
everything: Remove filename from @file Doxygen command
2015-05-22 07:34:41 +02:00
Oleg Hahm
9739acaf1b
Merge pull request #3032 from OlegHahm/at86rf_reset_delay
...
ng_at86rf2xx: set reset delay properly
2015-05-21 23:08:28 +02:00
Lucas Jenss
426170b064
Improve naming of thread stacksize/priority constants
...
As discussed in #2725 , this commit renames a number of stacksize constants to
better convey their intended usage. In addition, constants for thread priority
are given a `THREAD_` prefix. Changes are:
* KERNEL_CONF_STACKSIZE_PRINTF renamed to THREAD_EXTRA_STACKSIZE_PRINTF
* KERNEL_CONF_STACKSIZE_DEFAULT renamed to THREAD_STACKSIZE_DEFAULT
* KERNEL_CONF_STACKSIZE_IDLE renamed to THREAD_STACKSIZE_IDLE
* KERNEL_CONF_STACKSIZE_MAIN renamed to THREAD_STACKSIZE_MAIN
* Move thread stacksizes from kernel.h to thread.h, since the prefix changed
* PRIORITY_MIN renamed to THREAD_PRIORITY_MIN
* PRIORITY_IDLE renamed to THREAD_PRIORITY_IDLE
* PRIORITY_MAIN renamed to THREAD_PRIORITY_MAIN
* Move thread priorities from kernel.h to thread.h since the prefix has changed
* MINIMUM_STACK_SIZE renamed to THREAD_STACKSIZE_MINIMUM for consistency
2015-05-21 00:14:23 +02:00
Johann Fischer
b0e73b9a8c
Merge pull request #2983 from jfischer-phytec-iot/pr@kw2x-rf-autoinit
...
boards/pba-d-01-kw2x: add network interface auto init
2015-05-20 10:00:23 +02:00
Oleg Hahm
961d302d72
ng_at86rf2xx: set reset delay properly
2015-05-19 15:08:44 +02:00
Hauke Petersen
354e5db5a8
Merge pull request #2963 from OlegHahm/fix_2962
...
at86rf2xx: fix EUI64 computation
2015-05-19 10:59:34 +02:00
Oleg Hahm
6e6f1792af
Merge pull request #2586 from OlegHahm/remove_obsolete_cc110x_rpl_warning
...
cc110x: remove warning about the transceiver mode
2015-05-19 01:34:54 +02:00
Oleg Hahm
cfc3bf5f70
ng_at86rf2xx: replace printf with DEBUG
2015-05-18 21:21:57 +02:00
Jonas
9b66477180
adapted new auto-init process to kw2xrf driver
...
added kw2xrf to auto-init
2015-05-18 17:12:44 +02:00
Peter Kietzmann
b3e78ddc33
Merge pull request #3016 from gebart/pr/tab-indentation
...
Inconsistent indentation in some files
2015-05-18 15:45:15 +02:00
Oleg Hahm
67042901bc
xbee: remove superfluous includes
2015-05-18 15:30:25 +02:00
Oleg Hahm
92f4dec8da
xbee: use last 2 octets of EUI64 for short address
...
Dependency two CPUID and hard coded default short address are
superfluous now.
2015-05-18 15:30:25 +02:00
Oleg Hahm
c45eaf62de
ng_at86rf2xx: compute unique EUI64 from CPUID
...
The EUI64 for the at86rfxx is computed from the full CPUID by using
sliding xor.
2015-05-18 15:30:25 +02:00
895b629630
Merge pull request #2901 from kaspar030/fix_auto_init_netif
...
network: make auto_init_ng_netif less board-dependant
2015-05-18 13:09:55 +02:00
Oleg Hahm
5a5f9df898
cc110x: remove warning about the transceiver mode
...
* RPL is currently working with both transceiver modes (wake on radio
_and_ constant RX)
2015-05-18 11:41:27 +02:00
Hauke Petersen
fc52bfa164
Merge pull request #3014 from gebart/pr/ng_at86rf2xx-array-bounds
...
drivers/ng_at86rf2xx: correct array bounds on tx_pow_to_dbm
2015-05-18 10:35:14 +02:00
Hauke Petersen
7926d921df
Merge pull request #2973 from bapclenet/at86rf2xx/212b
...
at86rf2xx/915MHz fix
2015-05-18 10:13:52 +02:00
Joakim Gebart
0ae1a3d7e5
drivers/nrf24l01p: Replace tabs by spaces
2015-05-18 07:10:53 +02:00
Joakim Gebart
83065236ec
drivers/mag3110: Replace tabs by spaces
2015-05-18 07:10:52 +02:00
Joakim Gebart
9597cfd946
drivers/cc110x: Replace tabs by spaces
2015-05-18 07:10:52 +02:00
