Netifs without link status support will keep sending discover
messages with increasing time between.
Netifs that support link status will wait for the link to be up,
and then start sending.
Netifs that support link status but send no link status events
will continue to not work (unless link status is up from the
first check when setting it up).
qDSA as optimized implementations for AVR. The logic to select the optimized
backend predates the architecture features and uses some hand crafted logic.
This updates the logic to select the backend based on the boards architecture
using the feature system instead.
Set link state correctly in lwIP for interfaces that support
the NETOPT_LINK option. Interfaces that do not support it
(like tap for native arch) remain up all the time.
Netdevs that support NETOPT_LINK but do not send NETDEV_EVENT_LINK_UP/DOWN
events will end up with a mismatched link state - but DHCP would
already not start for them either.
Use netifapi to signal lwIP to do the work in its own thread.
Lists state, link type, v4/v6 addresses.
Currently read-only.
Using lwIP debug system to print addresses, to limit dependencies
and work with dual stack setup. Most other code seems to only
allow either v4 or v6 networking. For that to compile I
had to change the `SZT_F` format string due to this error:
```
error: format '%lu' expects argument of type 'long unsigned int',
but argument 2 has type 'size_t {aka unsigned int}'
```
Switching to the lwIP default format string here.
Outputs the following on my ESP32 board with Ethernet,
when both v4 and v6 are enabled in examples/paho-mqtt:
```
> ifconfig
Iface ET0 HWaddr: 24:0a:c4:e6:0e:9f Link: up State: up
Link type: wired
inet addr: 10.4.4.81 mask: 255.255.254.0 gw: 10.4.4.1
inet6 addr: fe80:0:0:0:260a:c4ff:fee6:e9f scope: link
inet6 addr: 2001:db8:1000:0:260a:c4ff:fee6:e9f scope: global
Iface ET1 HWaddr: 24:0a:c4:e6:0e:9c Link: up State: up
Link type: wireless
inet addr: 10.4.4.82 mask: 255.255.254.0 gw: 10.4.4.1
inet6 addr: fe80:0:0:0:260a:c4ff:fee6:e9c scope: link
inet6 addr: 2001:db8:1000:0:260a:c4ff:fee6:e9c scope: global
>
```
The standard is 9 years old now, it is well supported in all mayor compilers.
In fact, features of the 'new' standard are already used in RIOT (std_atomic).
Let's make it the default and adapt the Makefiles accordingly.
