- Use RIOT's GPIO interface to access the sensor to increase portability
- Changed API to allow more than one sensor per board
- Added `sht1x_params.h` that specifies how the sensors is connected - each
board can overwrite default settings by #defining SHT1X_PARAM_CLK and
SHT1X_PARAM_DATA
- Changed arithmetic to use integer calculations only instead of floating point
arithmetic
- Added support for checking the CRC sum
- Allow optional skipping of the CRC check to speed up measuring
- Added support for advanced features like reducing the resolution and skipping
calibration to speed up measuring
- Allow specifying the supply voltage of sensor which heavily influences the
temperature result (and use that information to calculate the correct
temperature)
- Reset sensor on initialization to bring it in a well known state
- Support for the obscure heater feature. (Can be useful to check the
temperature sensor?)
- Updated old SHT11 shell commands to the new driver interface, thus allowing
more than one SHT10/11/15 sensor to be used
- Added new shell command to allow full configuration of all attached SHT1x
sensors
- Removed old command for setting the SHT11 temperature offset, as this feature
is implemented in the new configuration command
- Replaced magic numbers in the CC110X configuration of the MSBA2
with SPI_DEV(x) and GPIO_PIN(x, y) macros
- Adjusted implementation of `cc110x_params.h` to match the code of `at86rf2xx`
- Made MSBA2's CC110X parameters the default configuration
* also added a trailing underscore to header guards for consistency
Commit for PR 2623, repairing header file include guards.
This PR is intended to fix the include guards in files under RIOT/boards
SQUASH ME: fix underscore removal overdos
SQUASH ME: consistent macro naming
SQUASH ME: missed that one
SQUASH ME: fixed overdo
SQUASH ME: consistency
This change allows drivers (or any module for that matter) to provide
features. This is e.g. useful if a board does not have a transceiver,
but your application uses `USEMODULE += some_driver`, which implements
the transceiver interface.
The line `FEATURES_PROVIDED += some_feature` should go to the guarded
block in `{sys,drivers}/Makefile.include`.
Please see #1715.
Closes#1715.
This PR implements the new Makefile variables "FEATURES_PROVIDED" and
"FEATURES_REQUIRED". A board *can* have a new file `Makefile.features`
which looks like:
```make
FEATURES_PROVIDED = transceiver
```
An application can have a corresponding line
```make
FEATURES_REQUIRED = transceiver
```
If the selected BOARD does not fulfil the requirements of the
application, then a *warning* is issued at compile time.
This change only includes the feature "transceiver", further features
are expected to be listed in further PRs. The requirement "transceiver"
is automatically added if the application uses the module
"defaulttransceiver".
`make buildtest` understands the new feature listing, so the user won't
need to add boards to `BOARD_BLACKLIST` manually.
Part of the change are the added Make targets
* `info-features-missing`, which prints the required features
`\setminus` the provided features. The output is empty if there are no
features missing.
* `info-boards-features-missing`, the same as `info-features-missing`
but as a table for all boards, but heeded `BOARD_WHITELIST` and
`BOARD_BLACKLIST`.
Applications don't have to use this new feature. This change does not
break existing Makefile.
This PR converts tabs to white spaces.
The statement I used for the conversion:
'''find . -name "*.[ch]" -exec zsh -c 'expand -t 4 "$0" > /tmp/e && mv /tmp/e "$0"' {} \;'''
Afterwards, I had a quick overview of the converted files to prevent odd indentation.
Many modules have subdirectories. Often these subdirectories should only
be included under certain circumstances. Modules that use submodules
currently need to use this pattern:
```make
DIRS = …
all: $(BINDIR)$(MODULE).a
@for i in $(DIRS) ; do $(MAKE) -C $$i ; done ;
include $(RIOTBASE)/Makefile.base
clean::
@for i in $(DIRS) ; do $(MAKE) -C $$i clean ; done ;
```
This PR moves the `all:` and `clean::` boilerplate into `Makefile.base`.
Closes#993.
We do not need to descend into the modules to know what to do on
`make clean BOARD=blub`. We can just invoke `rm -rf bin/blub`.
This PR only keeps the descending into the USEPKGs, since they might
want to delete cached/downloaded/extracted data.
