Marian Buschsieweke
1d0ee42046
drivers/at86rf2xx: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
benpicco
8348437713
Merge pull request #16039 from chudov/drivers/at86rf2xx_aes_spi/module_name_fix
...
drivers/at86rfr2xx: usage of module at86rf2xx_aes_spi fixed
2021-02-18 18:10:10 +01:00
chudov
762716049d
drivers/at86rfr2xx: usage of module at86rf2xx_aes_spi fixed
2021-02-17 20:47:18 +01:00
chudov
d5c8703c48
drivers/at86rf2xx: add missing handler for TRX24_RX_START interrupt for ATmegaRF MCUs
2021-02-17 01:03:01 +01:00
Marian Buschsieweke
bc2a225e53
drivers/at86rf2xx: fix null pointer check
...
check if argument is NULL *before* using it :-)
2021-01-21 10:23:40 +01:00
Gerson Fernando Budke
1426e15679
cpu/avr8_common: Normalize method prefix name
...
Refactor atmega_ prefix to avr8_ prefix and update copyrights.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-01-07 16:29:42 -03:00
Fabian Hüßler
f074e8a635
drivers/at86rf2xx: Use hardware security for IEEE 802.15.4 security
2020-12-04 09:40:55 +01:00
Bas Stottelaar
92b1dfc703
drivers/*: realign ENABLE_DEBUG
2020-10-23 01:26:09 +02:00
cb5e69c478
drivers/at86rf2xx: fix typo 'neccessary' -> 'necessary'
2020-10-02 08:01:49 +02:00
Hauke Petersen
020642476e
driver/at86rf2xx: fix asserts in _set func
2020-09-15 13:57:15 +02:00
fdaf7fd822
Merge pull request #14596 from benpicco/drivers/at86rf2xx-retries
...
drivers/at86rf2xx: support frame retry reporting on AT86RFR2
2020-09-09 10:27:05 +02:00
Benjamin Valentin
0871b69c84
drivers/at86rf2xx: support frame retry reporting on at86rfr2
...
At86rfr2 doesn't report retries directly, but it can generate a TX start
interrupt for each (re)try, so we can count manually.
2020-09-08 14:48:57 +02:00
Benjamin Valentin
0f4c5f5b10
drivers/at86rf2xx: fix assert
...
The assert is reversed. It must check if the config value does not
exceed the maximum address length, not the other way round.
previously this would lead to a crash when setting a short address:
2020-08-23 13:59:56,080 # ifconfig 7 set addr_short 2
2020-08-23 13:59:56,081 # 0xdcad
2020-08-23 13:59:56,083 # *** RIOT kernel panic:
2020-08-23 13:59:56,085 # FAILED ASSERTION.
With this it works as expected
2020-08-23 14:05:07,988 # ifconfig 7 set addr_short 2
2020-08-23 14:05:07,992 # success: set (short) address on interface 7 to 2
2020-08-23 14:05:52 +02:00
Benjamin Valentin
ac040c6baf
drivers/at86rf2xx: add support for high data rates
...
AT86RF2xx supports high data rates in O-QPSK mode.
This is a proprietary feature, so data rates > 0 are only supported by
other AT86RF2xx devices.
high_rate 0: 250 kbit/s (IEEE mode)
high_rate 1: 500 kbit/s
high_rate 2: 1000 kbit/s (compatible with at86rf215)
high_rate 3: 2000 kbit/s
2020-05-09 01:24:08 +02:00
Jose Alamos
ab5418ebab
at86rf2xx: report CRC error in basic mode
2020-04-08 19:14:45 +02:00
Jose Alamos
d4b0aff8cf
at86rf2xx: implement basic mode
2020-04-08 19:14:45 +02:00
Jose Alamos
3ad574a822
drivers/netdev: use netdev_trigger_event_isr function
2020-03-06 14:03:43 +01:00
Thomas Stilwell
751b0332da
drivers/at86rf2xx: reset hardware before reading version register
2020-02-13 21:33:22 -06:00
benpicco
16ab89bf28
Merge pull request #12728 from bergzand/pr/at86rf2xx/fix_recv_before_send
...
at86rf2xx: fix receive before send detection
2020-02-07 13:54:52 +01:00
42d54600f7
at86rf2xx: fix receive before send detection
...
The at86rf2xx radio handled a transfer complete condition with the radio
in the BUSY_TX_ARET state as a finished transmission. This condition and
state also occurs when a reception occurs just before switching to
transmitting. This would cause a condition where first a TX_COMPLETE was
signalled and second a RX_COMPLETE was signalled. The network stack
would then read the transmitted frame as a received frame.
The patch fixes the errornous RX callback by only submitting the
TX_COMPLETE condition when there are at least 2 frames pending
(at86rf2xx::pending_tx).
2020-02-07 13:08:33 +01:00
benpicco
ce1f383f90
Merge pull request #12606 from maribu/at86rf2xx-addr-endianess
...
drivers/at86rf2xx: Updated address API
2019-11-24 16:33:16 +01:00
Marian Buschsieweke
f0317c50f2
drivers/at86rf2xx: Updated address API
...
Changed the address getter and setter functions to avoid byte order
confusion.
2019-11-23 19:40:09 +01:00
Marian Buschsieweke
4347f720f5
drivers/at86rf2xx: Update to new ATmega API
...
Replace __enter_isr() with atmega_enter_isr() and __exit_isr() with
atmega_exit_isr()
2019-11-23 12:27:13 +01:00
5eb5c3c42c
at86rf2xx: split out isr transmit complete handling
2019-11-16 22:26:58 +01:00
Benjamin Valentin
8f1eaae353
drivers/at86rf2xx: add support for ATmegaRF MCUs
...
The ATmega128RFA1 and ATmega256RFR2 contain a version of this IP
on the MCU.
The radio core behaves mostly like a at86rf231, but all registers
are mapped to memory and radio states can directly generate interrupts
on the CPU.
The ATmega256RFR2 adds support for automatic retransmissions.
This has not been implemented yet.
Co-authored-by: Josua Arndt <jarndt@ias.rwth-aachen.de>
2019-10-26 23:10:18 +02:00
fabian18
2edf153cf8
drivers/at86rf2xx: do not hang on no dev
2019-09-02 10:27:24 +02:00
Martine Lenders
6611be5140
at86rf2xx: don't call tx_load when iol->iol_len == 0
2019-03-15 15:34:38 +01:00
smlng
6183d5f5c5
netdev: remove layer2 netstats from netdev drivers
...
Removing usage of netdev->stats in all net drivers, as it is
handled by gnrc_netif.
2019-02-01 11:25:27 +02:00
Martine Lenders
eaabd47dd8
Merge pull request #10275 from gebart/at86rf2xx/ed-overhaul
...
at86rf2xx: refactor received frame ED processing
2018-11-22 14:20:05 +01:00
josar
8e7c6cc26a
at86rf2xx/at86rf2xx_netdev: improve documentation.
...
It was not obvious where `dev->idle_state` was saved.
2018-11-16 18:53:36 +01:00
Joakim Nohlgård
23738008a7
at86rf2xx: refactor received frame ED processing
...
The value at the end of the frame buffer is the ED value, same as
PHY_ED_LEVEL, which is given in dB offset from RSSI_BASE.
2018-10-27 01:45:01 +02:00
Josarn
d1261a7ef0
at86rf2xx: correct framebuffer release
...
This PR sets the tranceiver in PLL_ON state to avoid corruption of the
data in the frame buffer and sets it back to the last state which the
transceiver had before changing into transmit mode after the data is
read out. This is done to avoid data corruption when `_recv(...)` is
called to retrieve the buffer size and frame buffer protection is released.
2018-10-26 19:16:34 +02:00
Semjon Kerner
5b0152f4f7
drivers/netdev_ieee802154: drop NETOPT_MAX_PKT_SIZE
2018-10-16 13:28:03 +02:00
Francisco Acosta
861fbe9a11
Merge pull request #9510 from Josar/pr/at86rf2xx_rssi
...
at86rf2xx: correct rssi
2018-08-20 14:52:06 +02:00
Josarn
4482c9851a
at86rf2xx: correct rssi
...
AT86RF231 MAN. p.89 8.3.2 Reading RSSI
AT86RF232 MAN. p.88 8.3.2 Reading RSSI
AT86RF233 MAN. p.99 8.4.2 Reading RSSI
"It is not recommended reading the RSSI value when using the Extended Operating Modes, use ED instead"
2018-07-26 13:37:23 +02:00
d9d99f9e24
at86rf2xx: Move flags from netdev to radio
...
The flags from the ieee802154 struct are only used in the radio code.
there is no advantage of having them in the netdev_ieee802154_t struct
if the flags are defined differently per radio driver.
2018-07-17 11:15:12 +02:00
Josarn
86b4dd43b0
at86rfr2xx: NETOPT_CSMA_RETRIES parenthesis
...
Reorder parenthesis to improve readability.
2018-07-06 16:50:50 +02:00
Josarn
5d69406d47
at86rfr2xx: uncrustified
2018-07-06 13:20:03 +02:00
23b414b732
drivers: net: adapt to iolist-using netdev
2018-03-06 14:00:31 +01:00
Hyungsin
a841d9ee0a
driver/at86rf2xx: add an option for auto-ack with the pending bit
2018-01-31 11:58:05 -08:00
Robert Hartung
a5ceb3c483
drivers/at86rf2xx: fixes get/set for NETOPT_AUTOACK
2017-12-11 15:57:23 +01:00
smlng
b283b7784c
make: fix various compile errors with Wextra
...
pkg, nordic_softdevice_ble: disable CFLAGS to omit compiler error
sys, pm_layered: fix casting nonscalar to the same type
cpu, stm32_common: fix type-limits, remove always true assert
cpu, stm32f4: fix pointer arithmetic in periph/i2c
drivers, at86rf2xx: fix type-limits where condition always true
saul, gpio: fix if no gpio configured for saul
cpu, saml21: add frequency check to periph/timer
driver, cc110x: fix unused param and type-limts errors
boards, wsn430-common: fix old-style-declaration
make: fix old style definition
drivers, sdcard_spi: fix old style typedef
driver, at30tse: remove unnecessary check
driver, nrf24: fix type-limit
driver, pn532: change buffer from char to uint8_t
tests/driver_sdcard: fix type limits
boards, feather-m0: add missing field inits
driver, tcs37727: fix type limits
pkg, emb6: disable some compiler warnings
tests/emb6: disable some compiler warings
pkg, openthread: fix sign compare and unused params
tests/trickle: fix struct init
tests/pthread_cooperation: fix type limits
board, mips-malta: remove feature periph_uart
shell: fix var size for netif command
gnrc, netif: fix sign-compare
gnrc, nib: fix sign-compare
shell: fix output in netif command
posix: fix type-limits in pthread_cond
2017-11-28 18:31:43 +01:00
Martine Lenders
a63bb6d47b
Merge pull request #6895 from bergzand/drivers/radio-rssi-conv
...
drivers/radios Apply register to rssi dBm conversion to all radios
2017-11-27 23:52:15 +01:00
11e147736d
at86rf2xx: Add RSSI dBm conversion
2017-11-27 21:49:15 +01:00
Martine Lenders
bae9c2e237
at86rf2xx: fix channel asserts
2017-11-15 18:44:59 +01:00
smlng
13639c1bb3
drivers, at86rf2xx: cleanup
...
- update documentation
- adapt constness
- fix code alignment and stlye
2017-11-07 21:37:41 +01:00
Joakim Nohlgård
cf6ea05220
Merge pull request #7581 from gebart/pr/at86rf2xx-preloading-retransmission
...
at86rf2xx: Avoid deadlock on manual retransmissions with NETOPT_PRELOADING
2017-10-31 14:15:35 +01:00
15c22e9ab7
at86rf2xx: add NETOPT_TX_RETRIES_NEEDED support
2017-10-04 12:20:15 +02:00
67244f2497
Merge pull request #7567 from gebart/pr/at86rf2xx-standby
...
at86rf2xx: Add NETOPT_STATE_STANDBY support
2017-10-01 11:59:12 +02:00
Joakim Nohlgård
52ac9cbb79
at86rf2xx: Avoid deadlock on manual retransmissions with NETOPT_PRELOADING
2017-09-07 21:03:37 +02:00
