tests/driver_ds3231
drivers/ds3231: add alarm support with IRQ
drivers/ds3231: alarm support and documentation
drivers/ds3231: alarm interrupt with mutex
drivers/ds3231: alarm, _unlock function
fixup! drivers/ds3231: add alarm support
Some periph_rtt implementations do not provide `rtt_set_counter()`. This
adds `periph_rtt_set_counter` as feature to allow testing for its
availability. The feature is provided at CPU level if periph_rtt is
provided by the board for all CPUs implementing `rtt_set_counter()`.
The clock adjustment API only used a 16 bit integer for speed correction. This
is to course grained to allow compensating clock drifts at high accuracy.
Using a 32 bit integer instead would allow to fix for a drift of up to
about 1 nanosecond drift per each 5 seconds.
That ought to be enough for anyone! (*cough* *cough*)
- Use negative errno as error codes, rather than home-grown enums
- Update the home-grown enum with negative errno codes for backward
compatibility and mark it deprecated
- Update API doc to use negative errno codes
- Fix various style issues in Doxygen doc
- Use `@retval` to document specific return values instead of abusing
`@return` for this
- Align parameters to proper indent level
The driver uses the netdev interface. Due to the limited
capabilities of the transceiver (32 byte FIFO and no source address in the layer2 frame),
it relies on 6LowPAN compression and adds the source address to the frame for that.
Changed the API of `netdev_driver_t`:
- The `send()` function should no longer return the number of bytes and should
not block
- The upper layer now must call the new `confirm_send()` function after
calling `send()`; either busy waiting until something different to `-EBUSY`
is returned, or after `NETDEV_EVENT_TX_COMPLETE` was signaled
During transition to the new API, the upper layer must remain backward
compatible and must assume the legacy API if `netdev_driver_t::confirm_send()`
is `NULL`.
The SI1133 from Silicon Labs is a UV Index Sensor and Ambient Light
Sensor in a small 2x2 mm DFN package. The sensor can measure
independently ultra violet (UV) light, infra red (IR) light and
ambient light, however the ambient light is also influenced by the
IR light requiring compensation from the IR readings.
The SI1133 is quite different from other Silicon Labs chips in RIOT OS
and therefore needs its own driver. In particular, the SI1133 has 7
different photodiode configurations to read but only 6 channels to
read them in parallel so only some channels can be read each time.
This patch implements a new driver allowing to read the data directly
and a saul interface for the three kinds of light source. There are
many configuration options including interrupts and continous modes
that are left out of this initial driver.
This adds an API function to play a buffer of Audio samples using a DAC.
Double buffered operation is supported by specifying a callback that will
be called when the next buffer can be queued with dac_dds_play().
To calibrate the at86rf215 radio, trim value has to be set at run-time
during board production.
Add two helper functions to control the trim value and clock output register.
flashpage currently requires pagewise implementation with an optional
extension for per block writes (flashpage_raw). Most implementations
with flashpage_raw implement the pagewise access via the flashpage_raw
functions. This commit makes the flashpage raw the main access method
and adds an extension feature for the pagewise access.
The functions and defines are renamed to reflect this. The API is also
extended with a dedicated function for erasing a sector.
Hold and WP are not used by the driver, but if they are connected
to the flash they must be driven HIGH to enable writes and not stop
any flash operation.
There is no difference between 4k erase and sector erase.
But sector erase would previously do `.block_erase` which would not
erase a sector (4k) but a whole block (64k).
Fortunately all boards declare `SPI_NOR_F_SECT_4K` and all file systems
don't try to erase anything smaller, so this was never triggered.
Add an `assert(0)` to crash instead of corrupting data.
Just read the JEDEC ID with a single SPI transfer, there can only
be 10 banks.
This makes adaption to QSPI much simpler because now flash functions
don't call the SPI API directly anymore.
In analogy to the existing GPIO mappings, this provides (write-only)
SAUL entries for PWM'd LEDs in a single-LED (as SAUL_ACT_DIMMER) and an
RGB (as SAUL_ACT_RGB_LED) mode.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
