19368: debug: add DEBUG_BREAKPOINT() macro, set breakpoint on failed assertion r=benpicco a=benpicco
19529: cpu/stm32/periph/dac: optimize setting DAC r=benpicco a=Enoch247
### Contribution description
The current implmentation right shifted the 16 bit value passed into `dac_set()` down to the 12 bits that the DAC is actually capable of. This patch drops the shift and instead writes the 16 bit value to the DAC's left aligned 12 bit wide data holding register.
### Testing procedure
do something like:
``` c
#include "perip/dac.h"
int main(void)
{
dac_set(DAC_LINE(0), 0xffff/2);
return 0;
}
```
- observe DAC's output is half of vref
### Issues/PRs references
- none known
19531: tests/unittests: allow passing `UNIT_TESTS` via env r=benpicco a=kaspar030
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
19292: sys/phydat: Fix unit confusion r=miri64 a=maribu
### Contribution description
Previously, `UNIT_G` was used for g-force with the correct symbol `g`, `UNIT_GR` for gram (as in kilogram) with the incorrect symbol `G` (which would be correct for Gauss), and `UNIT_GS` for Gauss with symbol `Gs` (which is an alternative correct symbol).
To avoid confusion between G-Force, Gauss, and Gram the units have been renamed to `UNIT_G_FORCE`, `UNIT_GRAM`, and `UNIT_GAUSS`. In addition, gram now uses the correct symbol `g`; which sadly is the same as for g-force. But usually there is enough context to tell them apart.
### Testing procedure
Green CI
### Issues/PRs references
None
19307: nanocoap_link_format: fix off-by-one error r=miri64 a=benpicco
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
18746: sys/clif: Fixing out of bounds read under certain conditions r=maribu a=Teufelchen1
Hi 😈
This fixes a potential out of bounds read in clif_encode_link. There is no code in RIOT that can be exploited.
The fix does not break the current API but alters the behaviour slightly. Before the change, the length attributes of `clif_attr_t` where optional. If missing, the length was deduced using `strlen()`. This fix makes those parameters required and if they are `0` it operates as if the length really is `0`. This might not be ideal but it is the only non api breaking fix I could think off.
```c
typedef struct {
char *value;
unsigned value_len; NO LONGER OPTIONAL
const char *key;
unsigned key_len; NO LONGER OPTIONAL
} clif_attr_t;
```
Depends on #18744
cc `@leandrolanzieri`
19161: bors.yaml: re-activate labels check + add block_labels r=miri64 a=miri64
Co-authored-by: Teufelchen1 <bennet.blischke@haw-hamburg.de>
Co-authored-by: Martine Lenders <m.lenders@fu-berlin.de>
Previously, `UNIT_G` was used for g-force with the correct symbol `g`,
`UNIT_GR` for gram (as in kilogram) with the incorrect symbol `G` (which
would be correct for Gauss), and `UNIT_GS` for Gauss with symbol `Gs`
(which is an uncommon but correct symbol).
To avoid confusion between G-Force, Gauss, and Gram the units have been
renamed to `UNIT_G_FORCE`, `UNIT_GRAM`, and `UNIT_GAUSS`. In addition,
gram now uses the correct symbol `g` and Gauss uses `G`.
This is an API change in the latter, which would typically now take an
extra argument GCOAP_SOCKET_TYPE_UNDEF.
Follow-Up-For: https://github.com/RIOT-OS/RIOT/pull/16688
17045: sys/coding: add XOR based coding module r=benpicco a=benpicco
19243: cpu/gd32v: add periph_gpio_ll and periph_gpio_ll_irq support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_gpio_ll` and `periph_gpio_ll_irq` support for GD32VF103. Level triggered interrupts are emulated.
`periph_gpio_ll_irq` could be split off from this PR as a separate PR if necessary.
### Testing procedure
Use any GD32V board and connect PA0 -> PB0 and PA1 -> PB1 where PA is the output port and PB the input port. With these connections `tests/periph_gpio_ll` should work.
```
BOARD=sipeed-longan-nano make -j8 -C tests/periph_gpio_ll flash term
```
If necessary, change the input and output pins by setting the environment variables and connect the corresponding pins, for example for `seeedstudio-gd32` PA1 -> PB8 and PA8 -> PB9:
```
PIN_OUT_0=1 PIN_OUT_1=8 PIN_IN_0=8 PIN_IN_1=9 BOARD=seedstudio-gd32 make -j8 -C tests/periph_gpio_ll flash term
```
### Issues/PRs references
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
18950: tests/unittests: add unit tests for core_mbox r=benpicco a=maribu
### Contribution description
As the title says
### Testing procedure
The test cases are run on `native` by Murdock anyway.
### Issues/PRs references
Split out of https://github.com/RIOT-OS/RIOT/pull/18949
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
This eliminates race conditions around unregistering netdevs.
gnrc_netreg_lookup-style functions perform a DEVELHELP check on whether
that lock is held.
