LP-HAW
61857d11ca
drivers/enc28j60: disable flow control
2023-07-22 21:44:02 +02:00
Alain Péteut
226b8cff52
drivers/enc28j60: fix PKTIF issue.
...
The PKTIF does not reliably report the status of pending packags.
Apply the proposed workaround [1].
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/Errata/80349c.pdf
2023-04-11 12:23:18 +02:00
Alain Péteut
200c49dead
drivers/enc28j60: do not block in ISR ctx.
2023-04-10 14:41:21 +02:00
Karl Fessel
05f114d0af
doc: fix unbalaced grouping
...
- most were trivial
- missing group close or open
- extra space
- no doxygen comment
- name commad might open an implicit group
this hould also be implicit cosed but does not happen somtimes
- crazy: internal declared groups have to be closed internal
2022-09-14 15:05:25 +02:00
Marian Buschsieweke
276ad5716a
sys/net/gnrc/netif: allow checking if a netdev is legacy or new API
...
A if `netdev_driver_t::confirm_send()` is provided, it provides the
new netdev API. However, detecting the API at runtime and handling
both API styles comes at a cost. This can be optimized in case only
new or only old style netdevs are in use.
To do so, this adds the pseudo modules `netdev_legacy_api` and
`netdev_new_api`. As right now no netdev actually implements the new
API, all netdevs pull in `netdev_legacy_api`. If `netdev_legacy_api` is
in used but `netdev_new_api` is not, we can safely assume at compile
time that only legacy netdevs are in use. Similar, if only
`netdev_new_api` is used, only support for the new API is needed. Only
when both are in use, run time checks are needed.
This provides two helper function to check for a netif if the
corresponding netdev implements the old or the new API. (With one
being the inverse of the other.) They are suitable for constant folding
when only new or only legacy devices are in use. Consequently, dead
branches should be eliminated by the optimizer.
2022-08-17 12:56:07 +02:00
Leandro Lanzieri
fa9822e6ef
drivers/enc28j60: model in Kconfig
2022-07-22 16:06:35 +02:00
Jan Romann
4384795cb9
treewide: Remove excessive newlines
2021-08-13 19:50:38 +02:00
Bas Stottelaar
92b1dfc703
drivers/*: realign ENABLE_DEBUG
2020-10-23 01:26:09 +02:00
Benjamin Valentin
1afe72a5e5
drivers/enc28j60: register with netdev
2020-10-08 10:36:56 +02:00
d0dadb49c0
drivers/enc28j60: fix typo 'Preamle' -> 'Preamble'
2020-10-02 08:02:45 +02:00
304bce3724
drivers: configure per driver dependency resolution
2020-07-20 14:32:16 +02:00
Martine Lenders
e5d692babe
Merge pull request #14493 from miri64/netopt/cleanup/rm-LINK_CONNECTED
...
netopt: remove deprecated alias NETOPT_LINK_CONNECTED
2020-07-17 22:35:46 +02:00
490126cfa0
drivers: move USEMODULE_INCLUDES in each driver directories
2020-07-15 20:36:27 +02:00
Martine S. Lenders
8dba9a9188
netopt: remove deprecated alias NETOPT_LINK_CONNECTED
2020-07-10 16:18:13 +02:00
Jose Alamos
3ad574a822
drivers/netdev: use netdev_trigger_event_isr function
2020-03-06 14:03:43 +01:00
f81e5c552a
drivers/enc28j60: fix typos
2019-11-23 22:39:39 +01:00
Francois Berder
4a31f94cfc
many typo fixes
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2019-11-23 22:39:07 +01:00
44f9c3fa28
enc28j60: use ethernet address helper functions
2019-06-10 21:07:02 +02:00
Marian Buschsieweke
f5cd25bdab
drivers/enc28j60: Allow sending with empty chunks
...
This commit allows `netdev_driver_t::send()` of `enc28j60` to be passed an
`iolist_t` containing one or more empty elements.
2019-03-20 09:57:45 +01:00
smlng
6183d5f5c5
netdev: remove layer2 netstats from netdev drivers
...
Removing usage of netdev->stats in all net drivers, as it is
handled by gnrc_netif.
2019-02-01 11:25:27 +02:00
Gunar Schorcht
5cb2dd32e0
drivers/enc28j60: fix of #9784
2019-01-24 23:25:17 +01:00
smlng
f35e4786f3
drivers/enc28j60: always set memory bank, if valid
...
Simplify handling of memory banks, ie. remove check if current bank
is target bank and set it explicitly every time.
2018-09-05 13:26:08 +02:00
smlng
4759f691fc
drivers/enc28j60: cleanup
...
Simplify usage of params via MACROs and copy params struct instead
of (re)assigning values to driver struct. Overall code cleanup.
2018-09-05 13:26:08 +02:00
Gunar Schorcht
738c1161c0
enc28j60: improvements to fix #9043
2018-07-17 19:19:15 +02:00
Gunar Schorcht
af226d4fec
enc28j60: fix compilation with l2 stats enabled
2018-05-07 13:42:03 +02:00
Martine Lenders
ce807173ff
Merge pull request #8601 from bergzand/pr/netopt-link-status
...
netopt/drivers: Add phy link status output
2018-03-18 15:25:01 +00:00
8735adee7d
enc28j60: add link status support
2018-03-18 15:32:41 +01:00
Martine Lenders
a9836ca946
Merge pull request #8686 from aabadie/pr/drivers/params/enc28j60
...
drivers/enc28j60: use new driver params scheme
2018-03-07 15:05:38 +01:00
23b414b732
drivers: net: adapt to iolist-using netdev
2018-03-06 14:00:31 +01:00
e0243d5529
drivers/enc28j60: use new driver params scheme
2018-03-01 14:03:02 +01:00
smlng
b283b7784c
make: fix various compile errors with Wextra
...
pkg, nordic_softdevice_ble: disable CFLAGS to omit compiler error
sys, pm_layered: fix casting nonscalar to the same type
cpu, stm32_common: fix type-limits, remove always true assert
cpu, stm32f4: fix pointer arithmetic in periph/i2c
drivers, at86rf2xx: fix type-limits where condition always true
saul, gpio: fix if no gpio configured for saul
cpu, saml21: add frequency check to periph/timer
driver, cc110x: fix unused param and type-limts errors
boards, wsn430-common: fix old-style-declaration
make: fix old style definition
drivers, sdcard_spi: fix old style typedef
driver, at30tse: remove unnecessary check
driver, nrf24: fix type-limit
driver, pn532: change buffer from char to uint8_t
tests/driver_sdcard: fix type limits
boards, feather-m0: add missing field inits
driver, tcs37727: fix type limits
pkg, emb6: disable some compiler warnings
tests/emb6: disable some compiler warings
pkg, openthread: fix sign compare and unused params
tests/trickle: fix struct init
tests/pthread_cooperation: fix type limits
board, mips-malta: remove feature periph_uart
shell: fix var size for netif command
gnrc, netif: fix sign-compare
gnrc, nib: fix sign-compare
shell: fix output in netif command
posix: fix type-limits in pthread_cond
2017-11-28 18:31:43 +01:00
kYc0o
58e3fab133
drivers/enc28j60/enc28j60.c: fix counter var length
2017-11-07 11:45:44 +01:00
94c753c07a
drivers: doxygen cleanup
2017-09-01 15:12:20 +02:00
Joakim Nohlgård
065bc62e0a
netdev: Make set() value parameter const void *
2017-08-25 13:41:19 +02:00
smlng
a7b049f98a
drivers: coding style, use {} for empty while loops
2017-06-11 20:08:10 +02:00
Martine Lenders
29842bb5e4
netdev2: rename to netdev and remove gnrc_netdev
...
With some minor hand-edits I used the following chain of commands:
```sh
git rm sys/include/net/gnrc/netdev.h
git grep --name-only -i netdev2 | \
xargs sed -i -e 's/^\(NETDEV\)2\(.*\)\( [("]\)/\1\2 \3/g' \
-e 's/\(netdev\)2\(.*\)\( \/\*\*<\)/\1\2 \3/I' \
-e 's/\(netdev\)2/\1/gI'
git add -p
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | xargs -I'{}' dirname '{}' | uniq | \
grep "netdev2" | while read dir; do
new_dir="$(echo "$dir" | sed "s/netdev2/netdev/g")"
git mv -f "$dir" "$new_dir"
done
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | while read file; do
new_file="$(echo "$file" | sed "s/netdev2/netdev/g")"
git mv -f "$file" "$new_file"
done
git commit --amend
git grep --name-only "\<drivers_netdev_netdev\>" | \
xargs sed -i "s/\<drivers_netdev_netdev\>/drivers_netdev_api/g"
git add -p
git commit --amend
```
2017-03-15 09:31:20 +01:00
Hauke Petersen
79a113d1ba
sys/drivers: renamed uuid module to luid
2017-02-27 11:01:20 +01:00
Hauke Petersen
dc3e78d521
drivers/end28j60: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
4105011867
drivers/enc28j60: used uuid module for addr gen
2017-01-19 11:09:29 +01:00
Martine Lenders
bd2429f299
cpu: drivers: adapt devices for netdev2 parameter type change
2016-08-03 12:30:51 +02:00
d7b17684e4
drivers: net: adapt to removed event_callback argument
2016-06-02 11:11:40 +02:00
Oleg Hahm
4ba73928ac
drivers enc28j60: correctly initialize netstats
...
Driver's netstats should be initialize in init, not isr...
2016-04-03 18:04:32 +02:00
Oleg Hahm
021e94ee6a
netdev2: introduce linklayer netstats
2016-03-29 22:34:09 +02:00
Oleg Hahm
26b3263f8a
netdev2: moved ethernet header into subdir
2016-03-25 15:10:07 +01:00
Hauke Petersen
e51d634aeb
drivers: adapted gpio_init(_x)() calls
2016-03-17 14:55:30 +01:00
Martine Lenders
8db42427cb
native/drivers/sys: adapt ethernet netdev2 for info struct
2016-02-22 12:37:26 +01:00
2e61f4d365
drivers: enc28j60: correctly pass on isr_arg
2016-02-21 21:55:33 +01:00
Hauke Petersen
f3ac84d43a
drivers: s/CPUID_ID_LEN/CPUID_LEN/
2016-02-08 11:10:59 +01:00
Hauke Petersen
22cc26e9d7
drivers: added driver for enc28j60 ethernet chip
2015-12-08 11:51:18 +01:00
