chrysn
25e11d99b1
make: Sort >/dev/null and 2>&1 when used with command
...
This is a follow-up for [16775], and was not caught there as that search
was limited to `which`.
Note that while this line can be simplified, the redirects ensure that
GNU Make < 4.3 will not optimize it into its own built-in shell that
does not know `command`.
[16775]: https://github.com/RIOT-OS/RIOT/pull/16775
2022-04-16 10:04:20 +02:00
af1456440c
dist/iotlab: remove deprecated auto-ssh backward compatibility
2022-01-06 09:59:26 +01:00
Martine Lenders
13cc189a8a
Revert "Remove which from shell invocations"
2021-09-03 11:27:03 +02:00
chrysn
6b50033766
makefiles: Replace which with command -v
...
As the POSIX documentation[1] of `command -v` guarantees that on error
there will be no output (and there will be output in the other cases),
the tests in Makefiles were simplified to test for output equality to
the empty string.
Redirects swallowing error outputs were removed, as the command produces
no error output there (as recommended at [2]).
Existing uses of `command` are simplified as well.
[1]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/command.html
[2]: https://salsa.debian.org/debian/debianutils/-/blob/master/debian/NEWS
2021-09-02 16:30:46 +02:00
565d28a6bc
tools/iotlab-testbed: add support for remote debugging
2021-06-02 18:13:34 +02:00
3c8cfd45f1
tools/iotlab-testbed: rename deprecated flash/reset-m3 subcommands
2021-06-01 17:37:50 +02:00
ebbe2c2aa1
tools/testbed-iotlab: better handle unsupported archis
2021-06-01 17:37:50 +02:00
a7f00548a2
tools/iotlab-testbed: check iotlab cli tools are installed
2021-06-01 17:37:50 +02:00
a9fceb1592
tools/iotlab-testbed: handle IOTLAB_NODE in comma separated form
2021-06-01 17:37:49 +02:00
6c0556b422
tools/testbed: use IOTLAB_NODE=auto instead of auto-ssh
...
This deprecates the use of IOTLAB_NODE=auto-ssh
2021-05-28 17:23:11 +02:00
5a8094ea0a
dist/iotlab: return ret code within a single call
2021-02-25 12:59:40 +01:00
Benjamin Valentin
5fdbd09187
boards: add zigduino
...
This adds support for the ATmega128RFA1 based Zigduino.
The board is available on the Strasbourg site of the IoT lab for testing.
2021-02-09 15:26:03 +01:00
506498a2df
dist/testbed-support: add iotlab mapping for dwm1001
2020-11-03 17:45:53 +01:00
5efbb97b5c
dist/testbed-support: remove iotlab wsn430 mapping
...
The boards were removed (EOL) and thus are no longer usable using IOTLAB_NODE
2020-07-10 16:49:08 +02:00
39ea73d48d
dist/testbed-support: use BINFILE for flashing on iotlab
...
This is a new feature in cli-tools v3 and is supported by all boards except wsn430 and firefly
2020-03-24 13:25:25 +01:00
d18b77f6e5
dist/testbed-support: fix firefly board mapping
2020-03-23 10:21:54 +01:00
5d84dd9061
testbed-support: add compatibility with cli-tools v3
2020-03-05 09:00:08 +01:00
Francisco
01779508d6
Merge pull request #12394 from aabadie/pr/make/iotlab_support_fix
...
make/testbed-support: fix error with FLASHFILE not defined
2019-10-17 23:21:12 +02:00
bdd3fed598
dist/testbed-support: add nrf52832mdk in IOTLAB_NODE targets
2019-10-16 11:57:21 +02:00
ffc4c84faa
dist/testbed-support: boards: remove useless IOTLAB_FLASHFILE
2019-10-16 11:44:59 +02:00
b389b881cf
dist/testbed-support: add nrf52840mdk in IOTLAB_NODE targets
2019-10-08 20:10:08 +02:00
0cb75c5f10
testbed-support: add nrf51dk to supported archis
2018-12-12 15:36:56 +01:00
Martine Lenders
37a11e9802
dist/testbed-support: add firefly in IoT-LAB archis
2018-12-04 14:54:26 +01:00
a640957e31
dist/testbed-support: add pba-d-01-kw2x in iotlab archis
2018-11-22 16:38:33 +01:00
17c7ad89a9
dist/testbed-support: add frdm-kw41z in iotlab archis
2018-11-22 10:56:50 +01:00
99fa0e9cf8
dist/tools/tested-support: update samr30 archi mapping
...
The archi was changed in IoT-LAB: samr30:at86rf215 => samr30:at86rf212b
2018-11-20 21:39:12 +01:00
a3f2d20169
dist/testbed-support: add new iotlab archi
...
nrf52840dk and microbit
2018-10-28 18:57:17 +01:00
Gaëtan Harter
8179038a8c
makefile.iotlab.single.inc.mk: add new IoT-LAB supported nodes
...
Support for `nrf52dk` and `samr30-xpro` has been added on saclay site.
2018-10-24 15:43:59 +02:00
Gaëtan Harter
599bc2afd2
makefile.iotlab.single.inc.mk: sort IOTLAB_ARCH_ variables definition
...
Define them in alphabetical order instead on putting the 'iotlab'
specific nodes at first. Prepare for adding new architectures.
2018-10-24 15:12:00 +02:00
Gaëtan Harter
7e81f54205
makefile.iotlab.single: add 'info-iotlab-node' target
...
Add a target to show the value of IOTLAB_NODE. Can be used to get the result of
using IOTLAB_NODE=auto or IOTLAB_NODE=auto-ssh.
2018-06-15 15:37:33 +02:00
Gaëtan Harter
124f9ec9bb
makefile.iotlab.single: check iotlab-node/iotlab-ssh return value
...
Format the output to be '0' on success and check it with grep.
This makes command fail when they failed on IoT-LAB.
2018-06-15 15:37:29 +02:00
Gaëtan Harter
d900e0a548
makefile.iotlab.single: add auto and auto-ssh modes
...
Usage:
make BOARD=iotlab-m3 IOTLAB_NODE=auto-ssh all flash term
Add support to select node number in auto mode
2018-06-15 15:37:25 +02:00
Gaëtan Harter
3bba0c5895
makefile.iotlab.single: add IoT-LAB testbed support for one node
...
Add support to do flash/reset/term on an IoT-LAB node.
It also allow running test using 'testrunner'.
Configuration variables are:
* `IOTLAB_NODE` which should be set to your node url
* The full url including site to use from your computer `m3-1.grenoble.iot-lab.info`
* The short url when used on the IoT-LAB frontend `m3-1`
* `IOTLAB_EXP_ID` for your experiment id for flash and reset.
By default it tries to use your currently running experiment if you have only one
* `IOTLAB_USER`: is read from `${HOME}/.iotlabrc` as saved by `iotlab-auth`
* It is expected to have run `iotlab-auth` beforehand.
2018-06-15 15:37:18 +02:00
