benpicco
770bda165a
Merge pull request #15571 from iosabi/drv_si1133
...
drivers/si1133: New SI1133 UV/IR/Ambient light driver
2020-12-14 08:41:00 +01:00
iosabi
ce76125a22
drivers/si1133: New SI1133 UV/IR/Ambient light driver
...
The SI1133 from Silicon Labs is a UV Index Sensor and Ambient Light
Sensor in a small 2x2 mm DFN package. The sensor can measure
independently ultra violet (UV) light, infra red (IR) light and
ambient light, however the ambient light is also influenced by the
IR light requiring compensation from the IR readings.
The SI1133 is quite different from other Silicon Labs chips in RIOT OS
and therefore needs its own driver. In particular, the SI1133 has 7
different photodiode configurations to read but only 6 channels to
read them in parallel so only some channels can be read each time.
This patch implements a new driver allowing to read the data directly
and a saul interface for the three kinds of light source. There are
many configuration options including interrupts and continous modes
that are left out of this initial driver.
2020-12-14 03:13:23 +00:00
dylad
7cbaa3f890
net/netdev: create SAM0 Ethernet entry in netdev_type_t
2020-12-13 21:41:20 +01:00
Benjamin Valentin
79c75300b1
drivers/mtd_spi_nor: enter 4-byte address mode needs write enable
2020-12-12 18:36:16 +01:00
chrysn
272c8d29cc
Merge pull request #13908 from benpicco/periph/dac_play
...
drivers/periph_common: dac: add dac_play()
2020-12-11 07:31:44 +01:00
benpicco
1477a340fe
Merge pull request #15150 from fabian18/ieee802154_security
...
Initial implementation of IEEE 802.15.4 security
2020-12-09 14:14:27 +01:00
Martine Lenders
1feacd1b88
Merge pull request #15583 from benpicco/byteorder_htols
...
drivers, sys: use byteorder_htols()
2020-12-08 20:15:19 +01:00
Leandro Lanzieri
06a06c32e3
Merge pull request #15573 from akshaim/Kconfig_rn2xx3_update
...
drivers/rn2xx3 : Kconfig updates.
2020-12-08 15:20:25 +01:00
Benjamin Valentin
7a7ebb1d5b
drivers/mrf24j40: use byteorder_htols()
...
same as 374d032b82
2020-12-08 13:40:57 +01:00
Benjamin Valentin
26bcaf94b5
drivers/at86rf2xx: use byteorder_htols()
...
same as 374d032b82
2020-12-08 13:40:24 +01:00
Akshai M
95394c4ba7
drivers/rn2xx3 : Update Kconfig
...
Expose CONFIG_RN2XX3_DEFAULT_AR to Kconfig
2020-12-08 11:34:03 +01:00
Akshai M
bfd3a903fb
drivers/rn2xx3 : r/LORAMAC_DEFAULT_AR/CONFIG_RN2XX3_DEFAULT_AR
...
Move 'LORAMAC_DEFAULT_AR' to drivers/rn2xx3 i.e
'RN2XX3_DEFAULT_AR'
Move 'RN2XX3_DEFAULT_AR' to 'CONFIG_' namespace
Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-12-08 11:33:44 +01:00
Francisco
d0082c6e48
Merge pull request #15561 from leandrolanzieri/pr/kconfig/drivers_bmx280_itg320x/fix_deps
...
drivers/{bmx280, itg320x}: fix Kconfig deps
2020-12-08 10:12:57 +01:00
Benjamin Valentin
ceb3f8443a
drivers/dac_dds: add module to play sample buffer over a DAC
...
This adds an API function to play a buffer of Audio samples using a DAC.
Double buffered operation is supported by specifying a callback that will
be called when the next buffer can be queued with dac_dds_play().
2020-12-04 23:12:32 +01:00
Leandro Lanzieri
792ea6efce
drivers/itg320x/kconfig: fix interrupt submodule dependency
2020-12-04 11:36:15 +01:00
Leandro Lanzieri
7d02037f87
drivers/bmx280/kconfig: show module only while testing Kconfig deps
2020-12-04 11:36:15 +01:00
Fabian Hüßler
f074e8a635
drivers/at86rf2xx: Use hardware security for IEEE 802.15.4 security
2020-12-04 09:40:55 +01:00
Fabian Hüßler
1b5bcec554
drivers/netdev: Add IEEE 802.15.4 security
2020-12-04 09:40:55 +01:00
Akshai M
d65a4b3f97
drivers/ili9341 : Update documentation
2020-12-03 14:20:34 +01:00
Akshai M
64ddd8384e
drivers/ili9341 : Expose to Kconfig
...
Group display drivers in menuconfig.
2020-12-03 14:20:34 +01:00
Akshai M
9f81956e41
drivers/ili9341 : Model 'CONFIG_ILI9341_LE_MODE' as BOOL
2020-12-03 14:20:34 +01:00
Akshai M
a322c6d4c0
drivers/ili9341 : Move 'ILI9341_VCOML' to 'CONFIG_'
2020-12-03 14:20:34 +01:00
Akshai M
d6935cd7bb
drivers/ili9341 : Move 'ILI9341_VCOMH' to 'CONFIG_'
2020-12-03 14:20:34 +01:00
Akshai M
7bb83f9e01
drivers/ili9341 : Move 'ILI9341_GVDD' to 'CONFIG_'
2020-12-03 14:20:34 +01:00
benpicco
a80631a297
Merge pull request #15074 from maribu/ptp-clock
...
drivers/periph/ptp_clock
2020-12-03 09:59:07 +01:00
Marian Buschsieweke
7d1edd51f4
drivers/periph: Added PTP clock API
2020-12-02 17:53:00 +01:00
benpicco
665c07eb53
Merge pull request #15120 from benpicco/driver/at86rf215-trim
...
driver/at86rf215: add functions to configure trim & clock output at run-time
2020-12-02 16:53:02 +01:00
Benjamin Valentin
95d082a2be
driver/at86rf215: add functions to set trim & clock output at run-time
...
To calibrate the at86rf215 radio, trim value has to be set at run-time
during board production.
Add two helper functions to control the trim value and clock output register.
2020-12-02 14:59:17 +01:00
Leandro Lanzieri
d91e8463bb
drivers/fxos8700: add module to Kconfig
2020-12-02 10:15:01 +01:00
Leandro Lanzieri
a2d31be65b
drivers/feetech: add module to Kconfig
2020-12-02 10:15:00 +01:00
Leandro Lanzieri
af672ca01a
drivers/dynamixel: add module to Kconfig
2020-12-02 10:14:41 +01:00
Leandro Lanzieri
03e94aab1e
drivers/uart_half_duplex: add module to Kconfig
2020-12-02 10:13:50 +01:00
Leandro Lanzieri
fe2c66fd89
drivers/dsp0401: add module to Kconfig
2020-12-02 10:13:11 +01:00
Leandro Lanzieri
2b70d7ab31
drivers/ds3234: add module to Kconfig
2020-12-02 10:13:11 +01:00
Leandro Lanzieri
480840e209
drivers/ds3231: add module to Kconfig
2020-12-02 10:13:11 +01:00
Leandro Lanzieri
53b5f6dac9
drivers/ds1307: add module to Kconfig
2020-12-02 10:13:11 +01:00
Leandro Lanzieri
05e79ed86d
drivers/ds75lx: add module to Kconfig
2020-12-02 10:13:11 +01:00
Leandro Lanzieri
0eb1f03c45
drivers/ds18: add module to Kconfig
2020-12-02 10:13:10 +01:00
Leandro Lanzieri
895be48336
drivers/disp_dev: add module to Kconfig
2020-12-02 10:13:10 +01:00
Leandro Lanzieri
789a197cee
drivers/dht: add module to Kconfig
2020-12-02 10:13:10 +01:00
Leandro Lanzieri
a0f8ad9e8c
drivers/dfplayer: add module to Kconfig
2020-12-02 10:13:08 +01:00
Leandro Lanzieri
d7e9b242e9
drivers/dcf77: add module to Kconfig
2020-12-02 10:12:16 +01:00
Leandro Lanzieri
92b54ecf94
drivers/edbg_eui: add module to Kconfig
2020-12-02 10:12:12 +01:00
Francisco
c9720d16ca
Merge pull request #15515 from leandrolanzieri/pr/kconfig/drivers_ghij
...
drivers/{g,h,i,j}*: add Kconfig modules
2020-12-02 10:03:02 +01:00
Marian Buschsieweke
5c70345aa6
Merge pull request #15537 from fabian18/sx127x_netdev_register
...
drivers/sx127x: use netdev_register()
2020-12-01 21:38:38 +01:00
benpicco
ef0eb9044b
Merge pull request #14954 from benpicco/drivers/at86rf215-netif_pktq
...
drivers/at86rf215: make use of packet queue if available
2020-12-01 17:59:06 +01:00
Fabian Hüßler
c526a34770
sx127x: make use of netdev_register()
...
Call netdev_register() in sx127x_setup()
and pass the index in auto_init_sx127x()
and semtech_loramac_init()
2020-12-01 16:34:11 +01:00
Fabian Hüßler
8ca2e09d95
drivers/include: add NETDEV_SX127X
2020-12-01 16:34:06 +01:00
Marian Buschsieweke
56cf30172f
Merge pull request #15532 from fabian18/cc110x_netdev_register
...
drivers/cc110x: use netdev_register
2020-12-01 16:17:37 +01:00
Benjamin Valentin
7fc042e2a9
drivers/at86rf215: use non-blocking send if gnrc_netif_pktq is active
2020-12-01 16:04:09 +01:00
