Hauke Petersen
6ab089e63e
drivers/pwm: remove PWM_NUMOF guard
...
as we do not build the periph drivers selectable currently,
the guard is triggered even for boards that do not have any
PWM defined and don't want to use it...
2016-12-15 12:18:39 +01:00
Hauke Petersen
41f453066c
drivers: added interface for writing flash pages
2016-11-30 16:51:09 +01:00
Peter Kietzmann
e547ff1d60
Merge pull request #6013 from haukepetersen/opt_periph_uartreturntypes
...
periph/uart: added names to return values
2016-11-29 19:14:09 +01:00
Martine Lenders
32c19d63e3
netdev2: make doc for driver more precise
...
When working on #6121 I noticed that the documentation of the `netdev2`
driver part is not really precise. This fixes that.
2016-11-22 14:57:26 +01:00
Peter Kietzmann
9c7d9eb06f
Merge pull request #6141 from haukepetersen/opt_bh1750fvi_namedreturnvalues
...
drivers/bh1750fvi: added names to return values
2016-11-21 08:23:24 +01:00
Peter Kietzmann
711415360f
Merge pull request #5433 from OTAkeys/pr/mma8x5x
...
mma8652: add support for all mma8x5x accelerometers
2016-11-18 09:02:42 +01:00
Hauke Petersen
40116c7c66
drivers/bh1750fvi: added names to return values
2016-11-17 22:57:56 +01:00
Vincent Dupont
b9b838f1dc
mma8652: add support for all mma8x5x accelerometers
2016-11-16 14:14:07 +01:00
Thomas Eichinger
103c426cdc
drivers/cc2420: calculate CRC and check CRC_OK bit on packet reception
...
First start calculating the CRC in hardware when receiving a frame.
Then, other than the at86rf2xx transceivers the cc2420 don't consider the
CRC_OK flag when reporting a successful packet reception. This change
introduces a check for this bit and drops the packet else by flushing
the RX FIFO.
2016-11-08 23:28:09 -08:00
Hauke Petersen
314549059c
periph/uart: added names for return values
2016-10-28 10:31:59 +02:00
Martine Lenders
9e97b0a028
Merge pull request #5977 from miri64/ieee802154/enh/centralize-default-values
...
ieee802154: centralize default values
2016-10-26 16:39:44 +02:00
Martine Lenders
eb4ec4b35f
Merge pull request #5961 from yschroeder/pullreq/at86rf2xx_compile_fix
...
at86rf2xx: fix warnings when building with -Wextra -pedantic
2016-10-26 15:59:59 +02:00
Martine Lenders
20e1fce5b7
ieee802154: centralize default values
2016-10-26 15:32:12 +02:00
Hauke Petersen
d7dbac7c61
drivers: added driver for W5100 Ethernet chips
2016-10-26 08:36:58 +02:00
Hauke Petersen
a3d1b5f839
drivers: added driver for LPD8808 LED strips
2016-10-25 18:32:52 +02:00
Yannic Schröder
c7d73e24c1
at86rf2xx: fix warnings when building with -Wextra -pedantic
2016-10-18 10:21:54 +02:00
Kees Bakker
bac5cda1e3
periph/i2c: convert char to uint8_t where applicapable
...
In general, data transferred through I2C are bytes and thus should have
type uint8_t, not char.
Also convert uint8_t ptrs to void ptrs
2016-10-04 20:26:39 +02:00
Martine Lenders
15c4ceae04
netdev2_ieee802154: cleanup flag definitions
2016-09-30 13:09:27 +02:00
Martine Lenders
9f29e56020
netdev2_ieee802154: remove NETDEV2_IEEE802154_PAN_COMP flag
2016-09-30 13:09:26 +02:00
add6e1d36d
Merge pull request #5674 from aabadie/driver_io1_xplained
...
drivers/io1_xplained: initial implementation of Atmel IO1 Xplained extension board
2016-09-16 10:35:49 +02:00
Laurent Navet
f30c4ade2c
drivers/timer: fix copy/paste error
2016-09-07 21:59:25 +02:00
3aa1ffb5fb
drivers/io1_xplained: initial implementation including temperature/LED/GPIO and auto init
2016-09-02 10:42:09 +02:00
Matthias Kolja Miehl
75ab341089
drivers: mag3110: fix typo in header description
2016-08-20 02:28:09 +02:00
Martine Lenders
cf11a0dab7
Merge pull request #5485 from jfischer-phytec-iot/pr@add-opt-netdev
...
add testmode and cca mode option to netdev
2016-08-05 15:51:56 +02:00
Martine Lenders
bd2429f299
cpu: drivers: adapt devices for netdev2 parameter type change
2016-08-03 12:30:51 +02:00
Martine Lenders
e710164f09
netdev2: function parameter type changes
...
`len` and `count` are both values that should never go `< 0`, so instead of
having to test this (in theory) every time the function is called (regardless
of by assert or if its unnecessary code), I propose to change it to `size_t`.
As a bonus I made the type of recv's buf parameter generic - no reason for it to
be a char and it might lead to unnecessary static casting requirements
2016-08-03 09:51:18 +02:00
Joakim Nohlgård
bc9e5b218b
periph/gpio: Clean up Doxygen text
2016-07-30 08:06:19 +02:00
Johann Fischer
14f0d1ce89
netopt.h: add new options to set the CCA and test modes
...
This patch adds two new options to netopt. NETOPT_CCA_MODE to set
the CCA mode corresponding to the respective PHY standard and
NETOPT_RF_TESTMODE to set the test mode for the radio.
2016-07-27 00:15:27 +02:00
Bas Stottelaar
0902ccb2e0
drivers: si70xx: adapt for SAUL
2016-07-22 18:22:13 +02:00
271cbc26b8
drivers/cc2420 & cpu/cc2538: adding support for default channel configuration
2016-07-14 17:50:50 +02:00
87ca058417
makefiles: expose a single DEFAULT_CHANNEL variable
2016-07-14 17:44:42 +02:00
Joakim Nohlgård
4798cd66d9
drivers/nvram: Add const to write source buffer declaration
2016-07-12 08:03:16 +02:00
kYc0o
374f4a1981
drivers/include: add cc2420 doxygen doc
2016-07-06 20:23:23 +02:00
Hauke Petersen
abc6b5ccdf
drivers: added support for CC2420 radio
2016-07-06 18:14:48 +02:00
Andreas "Paul" Pauli
87cb266a1b
Merge pull request #5437 from miri64/doc/enh/netdev-rx-fig
...
doc: add operational flow figure for netdev
2016-06-16 19:33:37 +02:00
Martine Lenders
af2e169db1
netdev2: doc: update doc text for operational flow figure
2016-06-15 23:26:23 +02:00
Laurent Navet
96ebff9174
drivers/uart: fix typos
2016-06-14 22:54:25 +02:00
3ad195963d
drivers: netdev2: rename isr_arg
2016-06-02 11:11:40 +02:00
82243b86fc
drivers: netdev2: remove extra event_callback argument
2016-06-02 11:11:40 +02:00
4a595d7b19
drivers/bmp180: add saul adaptation
2016-06-01 11:15:01 +02:00
Joakim Nohlgård
407e10d5b3
drivers/si70xx: Use Doxygen group drivers_sensors
2016-05-26 12:53:51 +02:00
Joakim Nohlgård
e215c9270e
drivers/lis3mdl: Change doxygen grouping to sensor drivers
2016-05-26 12:47:42 +02:00
Peter Kietzmann
e08733d2d1
Merge pull request #5234 from thomaseichinger/pr/phr_length_mask
...
drivers/at86rf2xx: mask frame length according to data sheet
2016-05-20 15:14:55 +02:00
Thomas Eichinger
5a45c31bcb
drivers/at86rf2xx: remove unused functions
...
These two functions are not used anymore and can be omitted.
2016-05-20 15:05:27 +02:00
Oleg Hahm
814be0655f
doc: minor fixes of typos in periph documentation
2016-05-03 23:37:22 +02:00
Francesco Ermini
9fa4684203
drivers/xbee: encryption support
...
add encryption to drivers
fix new line at the end of file
add shell command for enable encryption and set encryption key on a given device
modify _net_if_set_encrypt_key to support any key length
modify _net_if_set_encrypt_key to support any key length of the key
modify blank line
fix ace before tab in indent
fix ace before tab indent
fix ace before tab indent an error
fix trailing white space
drivers/xbee: encryption support
add encryption to drivers
fix new line at the end of file
add shell command for enable encryption and set encryption key on a given device
modify _net_if_set_encrypt_key to support any key length
modify _net_if_set_encrypt_key to support any key length of the key
modify blank line
fix ace before tab in indent
fix ace before tab indent
fix ace before tab indent an error
fix trailing white space
modify drivers/xbee/xbee.c
fix white spaces on xbee.c
Update xbee encryption driver
white line at end xbee.h
fix error
fix sc_netif.c
fix rebase master interactive
drivers/xbee: encryption support
add encryption to drivers
fix new line at the end of file
add shell command for enable encryption and set encryption key on a given device
modify _net_if_set_encrypt_key to support any key length
modify _net_if_set_encrypt_key to support any key length of the key
modify blank line
fix ace before tab in indent
fix ace before tab indent
fix ace before tab indent an error
fix trailing white space
drivers/xbee: encryption support
add encryption to drivers
fix new line at the end of file
add shell command for enable encryption and set encryption key on a given device
modify _net_if_set_encrypt_key to support any key length
modify _net_if_set_encrypt_key to support any key length of the key
modify blank line
fix ace before tab in indent
fix ace before tab indent
fix ace before tab indent an error
fix trailing white space
modify drivers/xbee/xbee.c
fix white spaces on xbee.c
Update xbee encryption driver
white line at end xbee.h
fix error
fix rebase conflict 4
fix same missing in patches changes
fix ascii to hex index parser
fix syntax rules
fix syntax issue 2
add _netopt_strmap NETOPT_ENCRYPTION e NETOPT_ENCRYPTION_KEY
fix trailng white spaces
2016-04-20 17:43:09 +02:00
kYc0o
724276e913
Merge pull request #4734 from Yonezawa-T2/xbee_resp_timeout
...
xbee: add timeout for AT command response (fixes #4731 )
2016-04-19 13:34:21 +02:00
Yonezawa-T2
4042239b04
xbee: add timeout for AT command response ( fixes #4731 )
2016-04-19 11:19:25 +09:00
Yonezawa-T2
67c3ab8fdd
xbee: changed default channel from 0x1A to 0x17 to support XBee-PRO
...
XBee supports channels 0x0B-0x1A while XBee-PRO supports only 0x0C-0x17.
2016-04-19 11:17:12 +09:00
kYc0o
e6d15f2d36
Merge pull request #5224 from haukepetersen/fix_periph_undef
...
drivers/periph: fixed UNDEF values to UINT_MAX
2016-04-13 16:39:59 +02:00
Hauke Petersen
7c02c616bd
Merge pull request #4863 from gebart/pr/saul-adc
...
SAUL: Add periph/adc support
2016-04-11 13:13:25 +02:00
Martine Lenders
1c45c503b8
netdev2: fix event_callback references
2016-04-09 13:22:19 +02:00
Oleg Hahm
252baecef7
at86rf2xx: introduce pending TX counter
...
This counter is necessary for the current concept to tell the driver when to return to idle after sending.
2016-04-08 11:32:40 +02:00
Joakim Nohlgård
50b48c28eb
sys/saul: Add analog inputs to SAUL via periph/adc
2016-04-08 10:18:12 +02:00
Joakim Nohlgård
1f645cf436
drivers/saul: Fix typo in documentation
2016-04-08 10:17:23 +02:00
Hauke Petersen
9a4df61005
drivers/periph: fixed UNDEF values to UINT_MAX
2016-04-01 10:57:26 +02:00
Yonezawa-T2
c4bc42419b
netdev2_tap: continue reading even if no spaces left in pktbuf
...
On OS X, `netdev2_tap` suspends monitoring file descriptor until `_recv` is
called. If no spaces in left in pktbuf, `gnrc_netdev2_eth` does not call `_recv`
that results in deadlock.
With this commit, `gnrc_netdev2_eth` calls `_recv` with NULL buffer and non-zero
length parameter, that indicates the driver to drop frame and resume working.
2016-03-31 16:59:12 +09:00
Martine Lenders
c5dc5b2d24
Merge pull request #5208 from kaspar030/fix_ethos_compile
...
drivers: ethos: fix compile errors
2016-03-30 17:37:52 +02:00
036e7f248d
drivers: ethos: fix compile errors
2016-03-30 17:09:58 +02:00
Peter Kietzmann
3fa8a267b3
Merge pull request #5155 from OlegHahm/diskio_cleanup
...
doc diskio: RIOTized style and added doxygen
2016-03-30 15:14:25 +02:00
Oleg Hahm
1f4d73dde1
Merge pull request #4801 from OlegHahm/netstats
...
netstats: introduce L2 netstats
2016-03-30 14:42:49 +02:00
Oleg Hahm
0925737e28
doc diskio: RIOTized style and added doxygen
2016-03-30 12:54:51 +02:00
Oleg Hahm
021e94ee6a
netdev2: introduce linklayer netstats
2016-03-29 22:34:09 +02:00
Rene Herthel
44ee645373
drivers/lis3mdl: Initial create of lis3mdl
2016-03-29 21:02:18 +02:00
Oleg Hahm
59674a679b
netdev2: use params parameter for setup
2016-03-28 20:22:20 +02:00
Oleg Hahm
3ba99aabe4
xbee: fix naming inconsistency
2016-03-28 20:22:20 +02:00
Oleg Hahm
26b3263f8a
netdev2: moved ethernet header into subdir
2016-03-25 15:10:07 +01:00
Hauke Petersen
2510fe03f5
Merge pull request #4646 from authmillenon/at86rf2xx/api/netdev2
...
at86rf2xx: port to netdev2
2016-03-24 15:03:15 +01:00
Martine Lenders
5bfc9e43fb
at86rf2xx: port to netdev2
2016-03-23 17:45:16 +01:00
Peter Kietzmann
ad149dcd68
Merge pull request #4804 from haukepetersen/opt_srf02_impltrigger
...
driver/srf02: expose trigger and read to API
2016-03-23 07:50:35 +01:00
941bdbbc56
drivers/bmp180: initial implementation
2016-03-22 19:51:03 +01:00
Hauke Petersen
ff2ff5d008
drivers/srf02: expose trigger and read to API
2016-03-22 17:07:04 +01:00
Hauke Petersen
b68b14b49b
Merge pull request #4666 from haukepetersen/opt_driver_dhtsaul
...
drivers/dht: added support for SAUL
2016-03-22 11:06:16 +01:00
Cenk Gündoğan
e6de2924ad
drivers: mma8652: add mma8652_params_t for initialization
2016-03-21 16:16:11 +01:00
Hauke Petersen
08ce2a5090
drivers/dht: adapted to GPIO changes
2016-03-17 14:55:31 +01:00
Hauke Petersen
e51d634aeb
drivers: adapted gpio_init(_x)() calls
2016-03-17 14:55:30 +01:00
Hauke Petersen
2515a3f9ef
drivers/gpio: changed the way the mode is configured
...
- joined pushpull and dir into one single mode parameter
- with this enabled the configuration of open-drain mode
2016-03-17 14:37:24 +01:00
Hauke Petersen
7c86467ef0
drivers/dht: added SAUL support
2016-03-17 10:39:42 +01:00
Hauke Petersen
d1d7192d93
drivers/saul: added default NOTSUP function
2016-03-17 10:29:34 +01:00
Oleg Hahm
1fe7c4b17b
led: move header into include directory
2016-03-16 16:09:45 +01:00
Martine Lenders
1caf0bcc8a
Merge pull request #4645 from authmillenon/netdev2/enh/ieee802154
...
netdev2: add basic IEEE 802.15.4 support
2016-03-15 18:28:29 +01:00
Martine Lenders
b0b76ba3a6
gnrc: initial import of GNRC<->netdev2 glue code for 802.15.4
2016-03-15 17:11:22 +01:00
Hauke Petersen
2d2126e909
drivers/uart: use uint8_t for data in cb signature
2016-03-15 10:57:44 +01:00
Hauke Petersen
40ae604c3b
drivers/dac: reworked DAC driver interface
2016-03-14 20:13:24 +01:00
Hauke Petersen
9bcfec9032
drivers/mq3: adapted to ADC driver changes
2016-03-14 13:06:24 +01:00
Hauke Petersen
58a8884acf
drivers/periph: remodeled the ADC periph interface
2016-03-14 10:38:42 +01:00
Martine Lenders
8bacb0fb62
Merge pull request #5011 from dkm/pr/servo.fix
...
drivers/servo: fix API doc
2016-03-13 08:48:00 +01:00
Joakim Nohlgård
dc303a4f0b
sys/uart_stdio: rename STDIO -> UART_STDIO_DEV, move to header
2016-03-11 12:04:00 +01:00
Hauke Petersen
49ac533eba
drivers/spi: made conf and speed types overridable
2016-03-09 17:59:25 +01:00
Marc Poulhiès
7c0c942e8e
drivers/servo: fix API doc
...
Parameters for servo_init/servo_set are in ms only when using default values for SERVO_RESOLUTION and SERVO_FREQUENCY.
When using non default values, user must scale values to be in the range of [0, SERVO_RESOLUTION]
Signed-off-by: Marc Poulhiès <dkm@kataplop.net>
2016-03-09 13:28:27 +01:00
Martine Lenders
b1a9dfe384
netdev2_ieee802154: import of common IEEE802.15.4 netdev2 module
2016-03-07 21:11:05 +01:00
Hauke Petersen
af48dadb26
Merge pull request #4807 from gebart/pr/saul-lis3dh
...
drivers/lis3dh: Add SAUL support
2016-03-02 13:23:29 +01:00
Peter Kietzmann
c8829a49b8
Merge pull request #4838 from haukepetersen/fix_periph_timerarg
...
drivers/timer: added callback argument
2016-03-01 08:55:54 +01:00
Joakim Nohlgård
3af809bdfc
Merge pull request #4910 from kaspar030/core_header_cleanup
...
core: header cleanup
2016-02-29 22:48:35 +01:00
Peter Kietzmann
a8b6fba69c
Merge pull request #4664 from haukepetersen/opt_driver_dhtinit
...
drivers/dht: numerous improvements
2016-02-29 16:23:31 +01:00
Hauke Petersen
2b97513637
drivers/timer: added callback argument
2016-02-29 14:40:08 +01:00
PeterKietzmann
e2cd3b1508
drivers/nrf24l01p: unified return values and fixed doc
2016-02-29 12:00:01 +01:00
9082273746
core: header cleanup
2016-02-28 22:46:28 +01:00
Bas Stottelaar
9e50d09b60
drivers: si70xx: temperature and humidity sensor
...
This includes the Si7006, Si7013, Si7020 and Si7021 I2C sensors, including a
test application.
2016-02-23 07:32:40 +01:00
Martine Lenders
dad883c745
netdev2: provide capability to pass up packet status information
2016-02-22 11:31:58 +01:00
