Ian Martin
5f05a956db
cpu/cc2538: clear only the latched UART interrupt flags
...
Otherwise incoming bytes can remain in the receive FIFO indefinitely.
2016-03-07 17:52:06 -05:00
Ian Martin
9642f2531a
cpu/cc2538: add periph/i2c driver
2016-03-03 11:04:39 -05:00
kYc0o
e730f1bdc3
Merge pull request #4878 from locicontrols/cc2538-periph-timer
...
cpu/cc2538/periph/timer overhaul
2016-03-03 11:11:57 +01:00
kYc0o
ec1bea389b
Merge pull request #2753 from locicontrols/baudrate-fix
...
cpu/cc2538: avoid using bitfields with the LCRH register
2016-03-02 11:41:02 +01:00
Ian Martin
b6fbdb2f79
Avoid rounding errors during frequency scaling.
2016-03-01 15:18:45 -05:00
Ian Martin
4176d04b02
cpu/cc2538/periph/timer overhaul
...
* Use the 32-bit counter mode.
* Apply frequency scaling for non-16 MHz frequencies.
2016-03-01 15:15:16 -05:00
Hauke Petersen
b11a3ad74b
cpus: adapted timer implementations to API changes
2016-02-29 14:45:00 +01:00
Ian Martin
04bd6e5f7c
cpu/cc2538: avoid using bitfields with the LCRH register
...
Otherwise the UART ignores the new baudrate divisor.
2016-02-26 11:42:32 -05:00
Joakim Nohlgård
e2f7ac78f0
Merge pull request #4040 from gebart/pr/periph-timer-init-freq
...
periph/timer: Change timer_init API to support arbitrary (integer) frequencies
2016-02-15 23:36:44 +01:00
Hauke Petersen
216a4cb432
cpu/cc2538: adapted HWRNG implementation
2016-02-14 12:58:30 +01:00
Joakim Nohlgård
943c106461
cpu/cc2538: Update to match timer_init API change
2016-02-13 21:29:36 +01:00
Hauke Petersen
940097336a
cpu: cleanup and unification of CPUID implementations
...
- moved definition of CPUID_LEN to periph_cpu.h
- fixed some doxygen
- simplyfied some implementations
2016-02-08 14:36:03 +01:00
Hauke Petersen
ad0abdcadd
cpus: use default isr_ctx struct in GPIO drivers
2016-01-27 17:00:37 +01:00
Oleg Hahm
4780b5cba1
cc2538: fix pedantic compiler warnings
2015-12-07 20:28:53 +01:00
Hauke Petersen
a58d577cb1
cpu/cc2538: adapted UART driver
2015-10-27 14:59:38 +01:00
Joakim Nohlgård
cbaeccdb90
periph/timer: Drop timer_reset
2015-10-17 20:11:03 +02:00
Ian Martin
40b93ea6ad
cpu/cc2538: uart init overhaul
2015-09-29 12:26:13 -04:00
Ian Martin
aca53006b0
cpu/cc2538: preserve UART_CTL flags when clearing an error condition
2015-09-29 12:26:13 -04:00
Ian Martin
b2c51bed6a
cpu/cc2538: eliminate unused macros UART_1_CTS_PORT and UART_1_RTS_PORT
2015-09-29 12:26:13 -04:00
Ian Martin
d70705f840
cpu/cc2538: round when computing the UART baudrate divisor
2015-09-29 12:26:13 -04:00
Hauke Petersen
47e8472949
cpu/cc2538: adjusted to changed GPIO interface
2015-06-12 19:10:49 +02:00
Joakim Gebart
13832d8e62
everything: Remove filename from @file Doxygen command
2015-05-22 07:34:41 +02:00
Hauke Petersen
e7fbaf3815
cpu: removed NAKED attribute from ISRs
...
- removed the __attribute__((naked)) from ISRs
- removed ISR_ENTER() and ISR_EXIT() macros
Rationale: Cortex-Mx MCUs save registers R0-R4 automatically
on calling ISRs. The naked attribute tells the compiler not
to save any other registers. This is fine, as long as the
code in the ISR is not nested. If nested, it will use also
R4 and R5, which will then lead to currupted registers on
exit of the ISR. Removing the naked will fix this.
2014-10-30 19:33:32 +01:00
Ian Martin
34086fc6c6
cpu/cc2538 bug fix: OE (output enable) bit was set by gpio_init_in().
2014-10-24 14:36:06 -04:00
Hauke Petersen
9051c7be4b
Merge pull request #1861 from haukepetersen/fix_cc2538_irqvector
...
cpu/cc2538: cleaned up IRQ vector definition
2014-10-24 14:40:10 +02:00
Hauke Petersen
ca20603d54
cpu/cc2538: made ISR names configurable by a board
2014-10-24 14:00:53 +02:00
Hauke Petersen
24ac5a7e94
cpu/cc2538: cleaned up IRQ vector definition
2014-10-24 14:00:47 +02:00
Hauke Petersen
ccd601b429
cpu/cc2538: centralized all cpu specific includes
...
- added all CPU specific includes to cpu-conf.h
- removed now not needed includes from cpu .c files
2014-10-23 14:04:57 +02:00
Ian Martin
0605a7eb95
Add support for the Texas Instruments CC2538 ARM Cortex-M3 MCU and developer kit.
2014-10-13 09:29:49 -04:00
