- point out behavior on denormalized time stamps
- use errno codes to indicate errors (and adapt the few instances of
actual error handling to use them)
19368: debug: add DEBUG_BREAKPOINT() macro, set breakpoint on failed assertion r=benpicco a=benpicco
19529: cpu/stm32/periph/dac: optimize setting DAC r=benpicco a=Enoch247
### Contribution description
The current implmentation right shifted the 16 bit value passed into `dac_set()` down to the 12 bits that the DAC is actually capable of. This patch drops the shift and instead writes the 16 bit value to the DAC's left aligned 12 bit wide data holding register.
### Testing procedure
do something like:
``` c
#include "perip/dac.h"
int main(void)
{
dac_set(DAC_LINE(0), 0xffff/2);
return 0;
}
```
- observe DAC's output is half of vref
### Issues/PRs references
- none known
19531: tests/unittests: allow passing `UNIT_TESTS` via env r=benpicco a=kaspar030
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
19343: ztimer: add ztimer_stopwatch convenience functions r=benpicco a=benpicco
19349: cpu/native: Switch to ztimer for gettimeofday r=benpicco a=MrKevinWeiss
### Contribution description
A xtimer is somewhat taken over by ztimer this explicitly uses ztimer instead of relying on the compatibility layer.
### Testing procedure
`make all test -C tests/cpp11_mutex/`
and green murdock I guess.
### Issues/PRs references
19353: doc: add quicklink to boards in navbar r=benpicco a=OlegHahm
### Contribution description
Finding a list of supported boards and how to use them is an essential information. Currently this list is somewhat hidden under "Modules" which is not very intuitive. Hence, I propose to (at least) put a link in the side menu to this overview page.
### Testing procedure
1. Call `make doc`
2. Check the sidebar `${RIOT_BASE}/doc/doxygen/html/index.html` for an entry "Supported Boards"
19361: nanocoap_sock: ensure response address is the same as request address r=benpicco a=benpicco
19363: Fix stm32 timer periodic r=benpicco a=Enoch247
### Contribution description
From the commit msg:
> cpu/stm32/periph/timer: remove unneeded header
>
> I see no reason this header should be included. It does not exist in
> RIOT's source tree. This patch removes the include.
and
> cpu/stm32/periph/timer: fix execution flow
>
> The implmentation of `timer_set_absolute()` has The following problems.
> First, it attempts to restore the auto reload register (ARR) to it's
> default if the ARR was previosly set by `timer_set_periodic()` by
> comparing it to the channel's capture compare (CC) register _after_ it
> has already set the CC register. Secondly, it clears spurious IRQs
> _after_ the CC register has been set. If the value being set is equal to
> the timer's current count (or the two become equal before the supurios
> IRQ clearing happens), this could cause a legitimate IRQ to be cleared.
>
> The implmentation of `timer_set()` has the same error in handling the
> ARR as described above.
>
> This patch reorders the operations of both functions to do:
>
> 1. handle ARR
> 2. clear spurious IRQs
> 3. set channel's CC
> 4. enable IRQ
>
> Additionally, the calulation of `value` in `timer_set()` is moved
> earlier in the function's exec path as a pedantic measure.
### Testing procedure
I tested by doing the following:
1. `make -C tests/periph_timer BOARD=nucleo-f767zi all flash term`
2. press s
3. press [ENTER]
4. observe test passes
5. `make -C tests/periph_timer_periodic BOARD=nucleo-f767zi all flash term`
6. press s
7. press [ENTER]
8. observe test passes
9. `make -C tests/periph_timer_short_relative_set BOARD=nucleo-f767zi all flash term`
10. press s
11. press [ENTER]
12. observe test passes
### Issues/PRs references
- none known
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: MrKevinWeiss <weiss.kevin604@gmail.com>
Co-authored-by: Oleg Hahm <oleg@hobbykeller.org>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
The macros CONCAT(), MIN(), and MAX() are defined over and over again in
RIOT's code base. This de-duplicates the code by moving the macros to a
common place.
