The partition table of the device in the esp8266 and esp32 based boards
was set to a default table with one "factory" partition with exactly
the size of the compiled firmware. This is problematic if we want to
update the device on the field.
This patch allows to set the `PARTITION_TABLE_CSV` variable from the
Makefile to a .csv file with a custom partition table, for example this
could be set to a partition table with two ota entries, or with a single
factory entry but of a known fixed size.
While nice at first, this causes more issues than it's worth for
a slightly more pretty output.
Hiding information from developers is not a good idea, especially when
it comes to an often finicky programming step.
While in theory error output should be caught, there are enough
cases where the programmer will get stuck in a loop or require user
input that hiding programmer output by default is a bad idea.
The Silicon Labs Si705x sensors (Si7050/1/3/4/5) are very similar to the
Si7021 sensors featuring only a temperature sensor and no humidity
sensor. The only difference between the Si705x is the temperature
accuracy of the reading, ranging from +/- 0.1 C in the Si7051 to +/- 1 C
in the Si7050.
This patch adds support for this family of sensors extending the
functionality of the existing si70xx driver. Following the style of
other modules, this implements a pseudomodule per supported chip, adding
si7050, si7051, si7053, si7054 and si7055 pseudomodules.
As a minor change this patch also implements the missing
si70xx_get_serial, si70xx_get_id and si70xx_get_revision functions that
were declared in the si70xx.h header but implemented as private
functions. The si70xx_get_id() may be relevant for the application to
know at run time exactly which version of the hardware is installed.
The updated test running with a Si7051 shows the following output, which
seems consistent with the room temperature conditions during the test.
```
make SI70XX_VARIANT=si7051 -C tests/driver_si70xx/ all flash
```
```
SI70XX temperature and humidity sensor test application
Initializing sensor...
[OK]
Found SI7051 sensor, revision 32
temperature: 24.71 C
temperature: 24.69 C
```
When riotboot depends on a package for building that the main
application also depends on (e.g., gecko_sdk for efm32), previously,
that package would be checked out twice in parallel, which fails.
This commit adds pkg-prepare as dependency to the bootloader target,
ensuring any packages are already up-to-date before calling the
bootloader submake.
tests/driver_ds3231
drivers/ds3231: add alarm support with IRQ
drivers/ds3231: alarm support and documentation
drivers/ds3231: alarm interrupt with mutex
drivers/ds3231: alarm, _unlock function
fixup! drivers/ds3231: add alarm support
The current script don't allow change debug protocol and not allows
set proper part name for xmega. This make DEBUGPROTO optional with
JTAG as default protocol. It add a filter for atxmega to add proper
AVRDUDE_PROGRAMMER_FLAGS.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current script doesn't allow change script path and name.
Add LDSCRIPT_COMPAT_PATH and LDSCRIPT_COMPAT_NAME default
values to allow a unique path inside atxmega folder.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Atmel AVR-8 CPU was reworked to accomodate variants like ATxmega.
This rename to atmega.inc.mk to avr8.inc.mk to be compliant with
new directory structure.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
When multiple debuggers are connected then pyocd shows an interactive
UI to select the user interface to flash, with python wrapper this
is lost.
Until a similar functionality is implemented with the wrapper disable
the programmer wrapper script when pyocd is used.
`cosy` is a graphical memory usage analyzer.
It is a great tool, but pretty hidden.
Add it as a build target so it can be easiely summoned for any application and board.
