The Atlas Scientific pH OEM sensor is a small circuit to be embedded in
end products to measure the pH value with any commercially available pH
electrode
- Serial.print() and Serial.println() have been extended to support:
- unsigned int
- long
- unsigned long
- The SerialFormat BIN has been implemented
- Serial.println(void) has been added
Using flash size in megabits is deprecated by esptool.
Use the new megabyte notation.
WARNING: Flash size arguments in megabits like '8m' are deprecated.
Please use the equivalent size '1MB'.
Megabit arguments may be removed in a future release.
esptool.py v2.6
UART FIFO must contain only 1 byte when newlib's `printf` function is used. Otherwise, outputs that are still not sent over UART are lost when `printf` is called asynchronousely.
To avoid unresolved symbols for unused functions during linking, compiler option `-ffunction-sections` is used now. Linker option `--warn-unresolved-symbols` is removed to get errors if required symbols cannot be resolved.
The modules `newlib, `newlib_syscalls_default` and `stdio_uart` are now used by default for output to the UART interface. This also reduces the dependency rules.
The overridden stdio functions `puts`, `putchar` and `printf` were removed. Instead, the corresponding newlib functions are always used. Using the newlib functions fixes output conflicts when using `f *` functions like `fprintf`,` fputs`, ... with `stdout` as the file parameter.
This is to avoid conflics with other config.h files, e.g. when building
for esp8266 where $(NEWLIB)/xtensa-lx106-elf/include/config.h gets
included instead.
The test randomly fails on `native` due to timers being not accurate but
it cannot be otherwise. So better disable it than raising fake errors.
...
151 diff=3
150 diff=4
149 diff=3539
148 diff=4
147 diff=3
....
min/max error: 1/3539
too large difference.
Test Failed.
Timeout in expect script at "child.expect_exact("Test complete.")"
(tests/xtimer_periodic_wakeup/tests/01-run.py:22)
The OONF package is combining multiple ".a" file into a single archive. The
way it was being done involved creating and changing directories, unpacking
the original archives and repacking them into a combined one.
Theis has a couple of issues:
- It is untidy and wasteful.
- It breaks when thin archives are enabled, as a thin archive cannot be
unpacked.
This commit uses a MRI script to do the combining step. It works both with
and without thin archives and is cleaner overall.
An issue that remains to be soved is that make is calling itself to create the
archive, as the PARTIAL_ARCHIVES are not known before hand. This is hacky. It
can be solved but it is a subject for another PR.
The test randomly fails on `native` due to timers being not accurate but
it cannot be otherwise. So better disable it than raising fake errors.
main(): This is RIOT! (Version: buildtest)
Testing generic evtimer
This should list 2 items
ev #1 offset=1000
ev #2 offset=500
This should list 4 items
ev #1 offset=659
ev #2 offset=341
ev #3 offset=500
ev #4 offset=2454
Are the reception times of all 4 msgs close to the supposed values?
At 662 ms received msg 0: "#2 supposed to be 659"
At 1009 ms received msg 1: "#0 supposed to be 1000"
At 1511 ms received msg 2: "#1 supposed to be 1500"
Traceback (most recent call last):
File "/tmp/dwq.0.3125418833043728/ef3af88c4b3615788b164464a437df5c/tests/evtimer_msg/tests/01-run.py", line 33, in <module>
sys.exit(run(testfunc))
File "/tmp/dwq.0.3125418833043728/ef3af88c4b3615788b164464a437df5c/dist/pythonlibs/testrunner/__init__.py", line 29, in run
testfunc(child)
File "/tmp/dwq.0.3125418833043728/ef3af88c4b3615788b164464a437df5c/tests/evtimer_msg/tests/01-run.py", line 26, in testfunc
assert(actual in range(expected - ACCEPTED_ERROR, expected + ACCEPTED_ERROR))
AssertionError
Use the new OPENOCD_RESET_USE_CONNECT_ASSERT_SRST to configure
'reset_config connect_assert_srst' when flashing and resetting only.
This removes the need for a special debug configuration and should allow
connecting to a running target again.
- Nucleo-f091rc can become unflashable when hardfaults occure.
To make sure flashing succeeds `connect_assert_srst` is called
before connecting to flash threw openocd.
- Add a variable to add extra openocd commands before resetting
a board. These will not be called when `debug`, in contrast
to OPENOCD_CONFIG, OPENOCD_EXTRA_INIT and OPENOCD_ADAPTER_INIT.
- Add connect_assert_srst to reset config if
OPENOCD_RESET_USE_CONNECT_ASSERT_SRST=1
