Martine Lenders
14a2f6bc18
gnrc: use gnrc_netif_default_init() for all implementations
2019-11-07 11:00:36 +01:00
62d299459f
drivers/hd44780: optimize detection of 4 and 8 bit modes
...
The driver can only be used with either 4 or 8 bit modes. Checking if the 5th pin is set in the configuration is enough the determine if 8bit mode should be used or not
2019-11-06 16:27:39 +01:00
6c56972dba
drivers/include/hd44780: avoid use of magic numbers
2019-11-06 16:25:27 +01:00
c7fac09d42
drivers/hd44780: fix potential hardfault on initialization
...
Co-authored-by Benjamin Valentin <benpicco@googlemail.com>
2019-11-06 16:14:39 +01:00
Marian Buschsieweke
4d279ae76e
Merge pull request #12055 from fabian18/driver-ina3221
...
Driver for INA3221 current and power and bus voltage monitor
2019-11-05 14:45:03 +01:00
Benjamin Valentin
513a3a7d59
periph_common/rtc: add rtc_tm_compare()
...
Add an easy way to compare two points in time.
2019-11-05 12:52:45 +01:00
fabian18
7e8cce875a
drivers/ina3221: Added SAUL integration
2019-11-05 12:37:41 +01:00
fabian18
195379a9b8
drivers/ina3221: INA3221 driver implementation
2019-11-05 12:29:42 +01:00
Marian Buschsieweke
bf54c56420
Merge pull request #12501 from maribu/NETOPT_MAX_PACKET_SIZE
...
drivers: Replaced NETOPT_MAX_PACKET_SIZE by NETOPT_MAX_PDU_SIZE
2019-10-30 10:51:32 +01:00
Benjamin Valentin
cf01c743a8
drivers/hd44780: add short delay after each character
...
On the LCD display connected to the MCB2300 board, the
display would not light up.
Adding a 1µs delay after each byte of data seems to fix it.
2019-10-29 11:09:56 +01:00
bfe1a84991
drivers/hd44780: change default pin params
...
Remove the use of arduino dependent macros. The default pins are for the Arduino Zero board
2019-10-29 11:09:56 +01:00
8e70cfb2e4
driver/hd44780: cleanup param definition and HD44780_RW_OFF
...
There's already a macro for undefined gpios: GPIO_UNDEF
2019-10-29 10:58:26 +01:00
04dc65f6ad
drivers/hd44780: move params header at the right place
2019-10-29 10:58:26 +01:00
808e44243e
drivers/nrf24l01p: fix potentially undefined return value
2019-10-28 14:46:57 +01:00
Marian Buschsieweke
4cf2151248
Merge pull request #12537 from benpicco/at86rfmega
...
drivers/at86rf2xx: add support for ATmegaRF MCUs
2019-10-28 09:22:02 +01:00
Gunar Schorcht
f4a16e6b81
Merge pull request #12568 from aabadie/pr/drivers/bmp180_scan-build_fix
...
drivers/bmp180: fix potential use of uninitialized variable
2019-10-27 09:48:07 +01:00
Benjamin Valentin
8f1eaae353
drivers/at86rf2xx: add support for ATmegaRF MCUs
...
The ATmega128RFA1 and ATmega256RFR2 contain a version of this IP
on the MCU.
The radio core behaves mostly like a at86rf231, but all registers
are mapped to memory and radio states can directly generate interrupts
on the CPU.
The ATmega256RFR2 adds support for automatic retransmissions.
This has not been implemented yet.
Co-authored-by: Josua Arndt <jarndt@ias.rwth-aachen.de>
2019-10-26 23:10:18 +02:00
Francisco
f68ad2ae6c
Merge pull request #12569 from aabadie/pr/drivers/ata8520e_fix_scan_build
...
drivers/ata8520e: fix potentially unused variables
2019-10-25 10:16:41 +02:00
9eee6bc0a1
usbdev: Fix spelling mistakes
2019-10-23 10:36:49 +02:00
679a07833b
drivers/bmp180: fix potentially use of uninitialized variable
...
This was reported by scan-build
2019-10-22 19:30:12 +02:00
07a2696f5d
drivers/ata8520e: fix potentially unused variables
...
This was reported by scan-build
2019-10-22 19:19:36 +02:00
5db4310b45
Merge pull request #12481 from aabadie/pr/driver/rn2xx3_fix_sleep
...
drivers/rn2xx3: fix sleep function
2019-10-20 08:00:40 +02:00
Marian Buschsieweke
cf9c84a00d
drivers/cc110x: Use NETOPT_MAX_PDU_SIZE
...
Replaced deprecated NETOPT_MAX_PACKET_SIZE by NETOPT_MAX_PDU_SIZE
2019-10-18 17:57:36 +02:00
Benjamin Valentin
d92e2b25ac
drivers/nrf24l01p: rename CMD_NOP -> CMD_NOOP
...
This prevents a conflict with an unrelated Atmel header file.
2019-10-17 19:20:31 +02:00
Jannes
fdd34499ac
drivers/mpu9x50: Correct read_temperature
...
Change msbiot Makefile.dep back to mpu9150
2019-10-17 14:04:43 +02:00
Jannes
2df5d6048d
driver/mpu9x50: Rename mpu9150 to mpu9x50
...
Rename all files
Rename all variables, methods and methodcalls
Rename all folders
Add to the makefiles
Add to doc
2019-10-17 12:52:18 +02:00
76267bdfea
drivers/rn2xx3: cleanup sleep function
2019-10-17 10:02:11 +02:00
Kevin "Tristate Tom" Weiss
e20ffd7f7c
Merge pull request #11738 from OTAkeys/feat/add_cme_cms_error
...
driver/at: add return code for CME/CMS errors
2019-10-15 12:55:40 +02:00
Leandro Lanzieri
bfd81c1d72
Merge pull request #12431 from benpicco/mrf24j40-fix_reset
...
drivers/mrf24j40: don't loop in mrf24j40_reset_state_machine()
2019-10-14 17:21:17 +02:00
Leandro Lanzieri
0e0b6f8231
Merge pull request #12221 from benpicco/mrf24j40-init_check
...
drivers/mrf24j40: allow for basic self-test on init
2019-10-14 15:36:52 +02:00
Benjamin Valentin
38b35c513c
drivers/mrf24j40: allow for basic self-test on init
...
During production it is often desirable for devices to perform
some kind of basic self-test to isolate defects.
For this it is necessary for the initialization not to hang if a
component is faulty / not connected.
This moves an already exising self-test that was previously enabled
as a debug option to an independent compile-time configurable.
It is necessary to call this in _init() before mrf24j40_hardware_reset()
as the reset function uses xtimer_usleep() which will cause another
thread to get scheduled.
If this thread (e.g. rpl or ipv6) then tries to access the netdev, RIOT
will crash.
2019-10-14 14:50:06 +02:00
Benjamin Valentin
853bbaf5a5
drivers/mrf24j40: don't loop in mrf24j40_reset_state_machine()
...
When hooking up the mrf24j40 to a bluepill board, the driver would
always get stuck on init.
Debugging revealed that it would get stuck in the mrf24j40_reset_state_machine()
function because it expects the RFSTATE to have a special value after reset.
However, the data sheet does not mention this in section 3.1 Reset.
Waiting 192µs should be enough - the value of the RFSTATE is not specified.
The Linux driver also does not wait for the RFSTATE register.
And even without the loop, the driver is functioning fine.
2019-10-11 23:01:54 +02:00
63a6bcd513
drivers/sx127x: skip reset sequence if pin is undefined
2019-10-09 15:07:23 +02:00
Peter Kietzmann
ed75d639d5
Merge pull request #12287 from Ilmu011/kw2xrf_tmr3_acktmout
...
drivers/kw2xrf: Use TMR3 instead TMR4 to detect ACK timeout
2019-10-02 23:10:11 +08:00
Adem-Can Agdas
d74570fae3
drivers/kw2xrf: use TMR3 instead TMR4 to detect ACK timeout
2019-10-02 15:09:18 +02:00
benpicco
0778774656
Merge pull request #12260 from JannesVolkens/opt3001
...
drivers/opt3001: Initial support for the Opt3001 sensor
2019-10-02 12:11:47 +02:00
benpicco
69d274d87b
Merge pull request #12290 from benpicco/opt_driver_lis2dh12i2c
...
drivers/lis2dh12: add I2C mode
2019-10-02 12:06:40 +02:00
Hauke Petersen
8a69e4ac69
drivers/lis2dh12: added I2C mode
2019-10-02 11:16:39 +02:00
Jannes
33a98100a9
drivers/opt3001: Initial support
2019-10-02 10:06:28 +02:00
Hauke Petersen
7f419f4381
periph/uart: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
0cd8bb47c8
periph/timer: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
4914e6484a
periph/spi: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
44c54c2ae0
periph/rtt: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
bf5ad17b9d
periph/rtc: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
711af7cc27
periph/hwrng.h: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
3e9ee01103
periph/gpio: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
e71f0bb0c6
periph/flashpage: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
8ef4f0d134
periph/dac.h: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
348b337023
periph/cpuid: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
f361ebc0bd
periph/adc: add doc on low power implications
2019-10-01 23:09:23 +02:00
