Currently the constructed NA for a delayed NA case is neither used nor
released nor does it get an IPv6 header to be used properly. This fixes
that case.
When working on the previous commit I was unsure if a
garbage-collectible entry should remain in the list, so I added this
comment so I don't have to wonder about this in the future ;-).
The `_next_removable` list manages the cache-out of the neighbor cache.
However, when a neighbor cache entry is removed, it is not removed
from that list, which may lead to a segmentation fault when that list is
accessed, since the whole entry (including its list pointer) is zeroed
after removal.
With this change the entry is removed from that list accordingly before
the zeroing happens.
When a new queue entry is tried to be allocated for a neighbor who's
address is currently tried to be resolved there was no error case
before. The packet that was tried to be put in the queue was thus not
released and stayed in the packet buffer for ever.
The function to infer the link-layer address length from the length of
a S/TLLAO is very dependent on the IPv6 over X specification and thus
should be grouped with the other IP over X functions.
When having a non-6LN interface and a 6LN interface (e.g. on a border
router) the assertion can hit when a Router Advertisement is received.
This makes the check an `if` statement rather than an assertion, to
account for that case.
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Since the recursion into `gnrc_ipv6_demux()` was removed in
`gnrc_ipv6_ext`, `gnrc_ipv6.c` is the only user of this function,
so it can be made private. It was only made public so it can be used
from `gnrc_ipv6_ext`.
As `pkt` isn't pre-parsed the write-protection of *the whole* packet
(except the netif-header) comes for free, when this was done in the
receive routine of IPv6.
Since with #10233 we now assume IPv6 packets always to not be
pre-parsed, we can iterate over the extension headers by gradually
"eating" them away. This allows us to move the iteration over them
out of `gnrc_ipv6_ext_demux()` and into `gnrc_ipv6_demux()`.
By moving the iteration over all extension headers out of
`gnrc_ipv6_ext_demux()` we also can
1. simplify the extension header handling a lot, as it now
just a loop inside `gnrc_ipv6_demux()`,
2. remove the recursion to `gnrc_ipv6_demux()` within
`gnrc_ipv6_ext_demux()`.
Since the packet is now guaranteed to be preparsed, the currently
handled IPv6 header will always be in the first snip. Because of this
the packet parser can't get confused anymore which IPv6 header is the
one to be handled so we don't need to remove the more outer ones.
Because of this we can just use the normal packet dispatching (which is
already used by other `GNRC_NETTYPE_*`-known protocol numbers such as
UDP).
This also reverts d54ac38f84.
Though this change might seem more complicated, it has the benefit, that
after #9484 we don't have to assume that a received packet within IPv6's
receive function can be handed to the function pre-parsed, making that
function far less complicated (will be provided in a future PR).
Also this might give the forwarding via routing header a little
performance boost, as we now don't *receive* the packet first only to
forward it later-on.
Without this the first packet to a new link-local address will not be
delivered in non-6Lo environments, since the interface is not provided.
With this change, if an internet was provided to the address resolver it
will be stored within an allocated `gnrc_netif_hdr_t`.
At this point [IPv6 already striped](netif strip) the packet of its
netif header, so there is no risk that there will be to, in case it was
provided and the `netif` came from its existence.
`_decapsulate()` is called by callees of `_receive()` so the call to
the latter function within the first creates a recursion we don't want.
Using `gnrc_netapi` instead removes that and provides the added benefit
that other subscribers to IPv6 are also informed.
gnrc_sock_recv used to duplicate functionality of gnrc_ipv6_get_header,
but additionally checked whether the IPv6 snip is large enough.
All checks are now included in gnrc_ipv6_get_header, but as most of them
stem from programming / user errors, they were moved into asserts; this
constitutes an API change.
Our `gnrc_minimal` example configures the link-local address from the
IEEE 802.15.4 short address since it does not include 6Lo-ND.
This causes the application to be incompatible with our other GNRC
application that do include 6Lo-ND, since it [assumes][1] the link-local
address to be based on the EUI-64 for address resolution.
This enforces long addresses (aka EUI-64) for all IEEE 802.15.4 devices
when IPv6 is compiled in so `gnrc_minimal` is compatible again to the
rest.
Fixes#9910
[1]: https://tools.ietf.org/html/rfc6775#section-5.2
Linux doesn't have ARO support at the moment so this is a workaround to
try to speak 6Lo-ND while still being able to do DAD with a border
router that doesn't.
While `tmp` in the loop for write-protection for the check-sum
calculation is used to check the return value of
`gnrc_pktbuf_start_write()`, it was never overwriting `payload` causing
the original snip to be used in the following iteration `prev` when
duplicated, and destroying the sanity of `ipv6`.
This change is a gnrc_ipv6_nib/gnrc_netif(2)-based rework of #7210.
Packet duplication
==================
Its main optimization is that it restructures `gnrc_ipv6` handling of
sent packets so that duplication for write-protection happens at the
latest possible step:
* potential `gnrc_netif` headers added by upper layers are
write-protected before their removal
* This unifies the duplication of the IPv6 header directly after
that
* Extension headers in-between the IPv6 header and the payload header
are duplicated just before the check sum is duplicated
Especially the last point allows for only handing a single packet snip
to all lower functions instead of an already searched IPv6 header
(which now is always the first until it is handed to the interface) +
payload header.
Further clean-ups
=================
* Next-hop link-layer address determination was moved to the
`_send_unicast` function, greatly simplifying the unicast case in the
`_send` function
* Code for loopback case was added to a new function `_send_to_self`
* Removed some code duplication
Parts of [RFC4862] were already implemented when NDP via the NIB was
first implemented. This change just includes the DAD portion of
[RFC4862]. This should be enough to make RIOT fully RFC4862 compliant.
[RFC4862]: https://tools.ietf.org/html/rfc4862
If the payload length is zero and the next header field is not set to
NONXT, GNRC will interpret the current header as the payload because the
first snip is always interpreted as the payload. This can lead to loops
and or crashes.
When the payload length of an encapsulated IPv6 packet is 0, the
`_receive` function of IPv6 can be given a NULL pointer, causing the
IPv6 header checker to crash because of a NULL pointer dereference.
With the previous fix, we only have to register addresses that are not
VALID yet on reception of router advertisements. This removes the need
for the hacky `GNRC_NETIF_FLAGS_6LO_ADDRS_REG` flag that was only
introduced to prevent unnecessary re-registration.
The whole address registration looses its point if all addresses are
marked valid from the get-go. With this fix non-link-local addresses
are first marked TENTATIVE and only after successful registration
marked as VALID. Link-local addresses are assumed to always be VALID.
[RFC6775] only talks of *routers* processing router advertisements,
with regards of discarding them if they do not contain an ABRO.
Additionally, this change makes configuration of tests setups a lot
easier, where one note is a router distributing a prefix and the other
is a host to be configured with the RA. Just do the following on the
router:
```
> ifconfig <if> add <GUA>
> ifconfig <if> rtr_adv
```
e voilà! In current master both nodes would have needed to be compiled
with `GNRC_IPV6_NIB_CONF_MULTIHOP_P6C=0`.
[RFC6775]: https://tools.ietf.org/html/rfc6775#section-8.1.3
This fix
* assures that the periodicity of the final router advertisements is
kept (so that no administrative change e.g. adding prefixes to the
prefix list causes additional RAs outside the rate limitation)
* removes all administrative options (PIO, ABRO, 6CO) from final router
advertisements (with router lifetime == 0)
I applied the following terminology and changed the wording in the doc
accordingly:
* must not: If the parameter is of the value it *must not* be it either
hits an assert or crashes the system.
* may not: The value can be that value, but the function will return an
error.
This renames the following functions
* `gnrc_netif_ipv6_addr_add()`
* `gnrc_netif_ipv6_addr_remove()`
* `gnrc_netif_ipv6_group_join()`
* `gnrc_netif_ipv6_group_leave()`
by appending the suffix `_internal`.
\## Reasoning
I'd like to provide a helper function for the *public* equivalent using
`gnrc_netapi_set()`, and those names are to nice to not be taken for
those.
\## Procedure
I used a combination of `git grep` and `sed` to do this and fixed the
alignment in the result of some cases by hand.
```sh
git grep --name-only "\<gnrc_netif_ipv6_\(addr\|group\)_\(add\|remove\|join\|leave\)\>" | \
xargs sed -i 's/\<gnrc_netif_ipv6_\(addr\|group\)_\(add\|remove\|join\|leave\)/\0_internal/g'
```
When a neighbor becomes UNREACHABLE which causes neighbor solicitations
to be send only up to every minute. If the medium is very busy this can
easily get lost, basically causing the neighbor never to be reachable
again from the perspective of the sending node. To fix this the backoff
is reduced to its start value, every time a packet is sent to that
neighbor.
This assertion doesn't make any sense. The function is called by
_copy_and_handle_aro() on a router which causes `nce` to be NULL
(because there is no NCE known yet) and then the function called
directly after (_reg_addr_upstream()) checks if `nce` might be NULL and
creates an NCE if necessary.
While the GNRC_IPV6_NIB_RTR_TIMEOUT is properly handled, it is actually
never fired. Moreover, the router lifetime is set, but never read.
This removes the router lifetime and switches it out for an evtimer
to does the GNRC_IPV6_NIB_RTR_TIMEOUT event.
When there are holes in the NIB (e.g. when entries were removed)
currently the NIB crashes the system due to a failed assertion
(`DEVELHELP` needs to be activated to test this behavior).
This fixes this behavior by making the assertion a check that is always
compiled in.
In the case that GNRC_IPV6_NIB_CONF_ARSM is set but
GNRC_IPV6_NIB_CONF_6LN is not, clang complains about
the function _get_l2addr_from_ipv6 never being used.
I couldn't easily figure out why this passes in Murdock,
but I'm guessing that clang is simply being smarter than
GCC. Can someone comment on whether there is a better fix
for this?
Relates to #6473
_is_reachable is only used when GNRC_IPV6_NIB_CONF_ARSM
is enabled, and as such it must be guarded so that clang
doesn't complain about a unused function in case
GNRC_IPV6_NIB_CONF_ARSM is not set
Similar to #7910
Relates to 6473
