Aaron Sowry
d7377cde27
Support flashing openmote-cc2538 board via serial interface
...
Enable directly from Makefile target 'flash' using cc2538-bsl script,
and make this the default flashing method for this platform.
2016-03-11 09:40:55 +13:00
Martine Lenders
dc16cb188a
Merge pull request #4433 from aeneby/openmote-cca
...
Update OpenMote board header file to define UPDATE_CCA
2016-03-07 20:02:45 +01:00
Aaron Sowry
24f5bc8cef
Update OpenMote board header file to define UPDATE_CCA.
...
As per the cc2538dk and ReMote boards. This enables the cc2538's
bootloader backdoor, to allow flashing via the serial interface even
when a valid image is already present.
Backdoor enable is set to LOW, PORT A, PIN 6 (ON/SLEEP on the OpenBase),
for consistency with the default OpenMote firmware.
2016-03-04 07:37:00 +13:00
Ian Martin
9642f2531a
cpu/cc2538: add periph/i2c driver
2016-03-03 11:04:39 -05:00
Ian Martin
e97af73862
enclose the numeric defines in parenthesis.
2016-03-01 15:15:19 -05:00
Ian Martin
4b29d2ef6d
set xtimer parameters for cc2538-based boards.
2016-03-01 15:15:19 -05:00
Ian Martin
4176d04b02
cpu/cc2538/periph/timer overhaul
...
* Use the 32-bit counter mode.
* Apply frequency scaling for non-16 MHz frequencies.
2016-03-01 15:15:16 -05:00
Hauke Petersen
f07a2758a0
boards/openmote: use global JLink script
2016-03-01 19:23:38 +01:00
Hauke Petersen
fe5023b7d4
boards: adapted to HWRNG changes
2016-02-14 12:59:47 +01:00
Joakim Nohlgård
7835ab2be7
make: Move BOARD and CPU includes to Makefile.modules
2016-02-10 16:37:03 +01:00
Joakim Nohlgård
fae9a092fd
boards: Remove Makefile.include.cortexm_common
2016-02-10 16:37:03 +01:00
Hauke Petersen
b436219674
boards: removed F_CPU define from board.h
2016-01-27 09:52:44 +01:00
Aaron Sowry
7759611713
Rename 'openmote' board to 'openmote-cc2538'
...
This is to avoid ambiguity with future versions of the OpenMote platform.
2016-01-23 08:06:15 +13:00
