Ctrl-D was not caught in a special case so it was interpreted as
a standard character. Handle it now the same way like EOF and
terminate the shell instance.
Replace direct accesses to sched_active_thread and sched_active_pid with
the helper functions thread_getpid() and thread_get_active(). This serves
two purposes:
1. It makes accidental writes to those variable from outside core less likely.
2. Casting off the volatile qualifier is now well contained to those two
functions
In most places, picolibc and newlib are the same, so use
the existing newlib code when compiling with picolibc.
Signed-off-by: Keith Packard <keithp@keithp.com>
Introduce optional user shell_post_readline_hook, shell_pre_command_hook, shell_post_command_hook.
Enable with USEMODULE=shell_hooks.
Calls user implemented *_hook functions if defined.
If implementation does not exist, nothing happens.
The intent is to make profiling of the shell command timings easier.
Test provided in tests/shell with USEMODULE=shell_hooks.
Originally, the options and flags in the `netif` shell output were
separated by two spaces. For later added flags this is not the case,
making the parsing of those flags and options hard to impossible.
This change adds those missing spaces + comments so it might not happen
again in the future.
The private parts need USB definitions (and are thus preferably used
from USB_H_USER_IS_RIOT_INTERNAL compilation units). Functions like
usb_board_reset_in_bootloader do not depend on USB headers for their
definitions and are fair game throughout the application even for
generic RIOT USB devices.
The code for traversing arrays of shell commands (used to print help messages
and to search for commmand handlers) was needlessly complex.
Co-authored-by: Juan Carrano <j.carrano@fu-berlin.de>
Factor out common code for quoted and unquoted tokens. This makes the code
slighly less clear, but it also eliminates repetition (which may improve
clarity).
Co-authored-by: Juan Carrano <j.carrano@fu-berlin.de>
The tokenizer (the code that breaks up the line given to the shell into
strings to create argv) was quite a messy piece of code. This commit
refactors it into a more traditional state-machine based parser.
This fixes the issues with quote handling exposed by the recently
introduced test.
Co-authored-by: Juan Carrano <j.carrano@fu-berlin.de>
This makes the code of `readline()` clearer and shorter. It also fixes a
minor artifact of the long line handling.
Previously it was not possible to recover from a long line. That is, if too
many characters were sent, the line would be invalidated and pressing backspace
would not fix it- the only option was to discard the line. It is now possible
to bring the line back to size. Note that visual effects when deleting characters
will still depend on the host's terminal.
The new code is written in a way that all writes to memory are guarded by
bounds check, so an assertion was removed.
Co-authored-by: Juan Carrano <j.carrano@fu-berlin.de>
There was some code added to "prevent putchar from being inlined", which
supposedly enlarged the code size.
Co-authored-by: Juan Carrano <j.carrano@fu-berlin.de>
The numeric value for EOF is -1. This caused the shell to return
the same code when EOF was encountered and when the line lenght was
exceeded. Additionally, if the line length is exceeded, the correct
behaviour is to consume the remaining characters until the end of
the line, to prevent the following line from containing (potentially
dangerous) garbage.
Co-authored-by: Hendrik van Essen <hendrik.ve@fu-berlin.de>
If there is more than one interface, print the id of the receiving
interface for convenience.
```
ping6 ff02::1
2020-02-20 18:19:38,644 # 12 bytes from fe80::d0ae:c1b:2054:58e%7: icmp_seq=0 ttl=64 rssi=-45 dBm time=4.801 ms
2020-02-20 18:19:38,652 # 12 bytes from fe80::d0ae:c1b:2054:58c%8: icmp_seq=0 ttl=64 rssi=-63 dBm time=13.422 ms (DUP!)
2020-02-20 18:19:38,661 # 12 bytes from fe80::c78:16d9:8aca:ba9a%8: icmp_seq=0 ttl=64 rssi=-44 dBm time=21.819 ms (DUP!)
2020-02-20 18:19:39,648 # 12 bytes from fe80::d0ae:c1b:2054:58e%7: icmp_seq=1 ttl=64 rssi=-44 dBm time=4.797 ms
2020-02-20 18:19:39,657 # 12 bytes from fe80::d0ae:c1b:2054:58c%8: icmp_seq=1 ttl=64 rssi=-61 dBm time=12.917 ms (DUP!)
2020-02-20 18:19:39,666 # 12 bytes from fe80::c78:16d9:8aca:ba9a%8: icmp_seq=1 ttl=64 rssi=-43 dBm time=21.679 ms (DUP!)
2020-02-20 18:19:40,657 # 12 bytes from fe80::d0ae:c1b:2054:58e%7: icmp_seq=2 ttl=64 rssi=-41 dBm time=4.795 ms
```
Having the definitions sit in the `net/gnrc/sixlowpan/frag.h` header
does not make much sense, when using Selective Fragment Forwarding
(and the fragmentation buffer already includes a
`net/gnrc/sixlowpan/frag/stats.h` header), so they are moved to their
own header. Since with this change it makes more sense to have the
statistics stored in their own sub-module, the pseudo-module is also
actualized.
