8f0f28bd50
tests/ssp: make use of architecture features
2019-10-14 22:40:13 +02:00
8a1e78bf4d
Merge pull request #9081 from kaspar030/add_arch_features
...
make: add architecture features and feature blacklisting
2019-10-14 16:12:54 +02:00
Cenk Gündoğan
b4cb32a8ab
Merge pull request #12440 from miri64/tests/fix/gnrc_rpl_srh
...
tests/gnrc_rpl_srh: fix test assumption
2019-10-14 14:43:30 +02:00
Martine Lenders
3e7f25566f
tests/gnrc_rpl_srh: fix unittests for gnrc_rpl_srh behavior change
2019-10-14 12:04:35 +02:00
Martine Lenders
ee2126a4e2
tests/gnrc_rpl_srh: fix test assumption
...
If the destination address or an address within the source route is
multicast within a RPL source routing header, a receiving node is
supposed to just discard the packets, but not to send an ICMPv6 error
message, as the test assumes at the moment.
Source: https://tools.ietf.org/html/rfc6554#section-4.2
2019-10-14 10:33:25 +02:00
9bc600a2e5
Merge pull request #12386 from keestux/sodaq-boards-arduino
...
Sodaq boards arduino
2019-10-14 07:47:58 +02:00
3eae2f7b79
pkg/lwip: add arch_32bit feature dependency
2019-10-13 21:03:41 +02:00
Martine Lenders
c94de51e03
Merge pull request #12414 from miri64/gnrc_ipv6_ext_frag/fix/n-th-with-full-rbuf
...
gnrc_ipv6_ext_frag: fix release on rbuf creation for n-th fragment
2019-10-13 15:10:50 +02:00
JulianHolzwarth
15349eab61
tests/xtimer_mutex_lock_timeout/main.c: shell command description
...
"(no-spin timeout)" instead of "long timeout" to make it consistent
2019-10-11 15:44:56 +02:00
JulianHolzwarth
d9aec38f1f
tests/xtimer_mutex_lock_timeout/main.c: Function to terminate
...
The function will terminate the thread and send the message m to target_pid.
2019-10-11 15:44:56 +02:00
JulianHolzwarth
714ee17fab
tests/xtimer_mutex_lock_timeout/ new test with thread
...
Two Functions cmd_test_xtimer_mutex_lock_timeout_low_prio_thread and thread_low_prio_test are added.
This testfunction will test xtimer_mutex_lock_timeout with two threads (main thread and lower prio than main thread).
The main thread creates another thread and sleeps. While the main thread sleeps the other thread takes the mutex
and wakes the main thread up.
Then the main thread calls xtimer_mutex_lock_timeout and the second thread unlocks the mutex and
the main thread gets it and waits for the created thread to end.
Has test messages showing the thread count. To make sure the created thread ends.
(test messages may be removed in the future)
2019-10-11 15:44:56 +02:00
JulianHolzwarth
f0da0121f4
tests/xtimer_mutex_lock_timeout/main.c: print empty line
...
printing emty line after each test function to make the test easier to read
2019-10-11 15:44:55 +02:00
JulianHolzwarth
1fe8d33416
tests/xtimer_mutex_lock_timeout/Makefile: adding ps for better testing
2019-10-11 15:44:55 +02:00
JulianHolzwarth
6183f50462
tests/xtimer_mutex_lock_timeout/main.c: remove unnecessary/wrong include
2019-10-11 15:44:55 +02:00
Jose Alamos
9727f325ff
tests/gnrc_netif: adapt to new netif_t representation
2019-10-11 10:59:14 +02:00
Ken Bannister
9946e24bc9
Merge pull request #12375 from miri64/tests/enh/rs-i137
...
tests: prepare for RIOT-OS/Release-Specs#137
2019-10-10 13:57:54 -04:00
Martine S. Lenders
9e625841b7
tests/gnrc_udp: update BOARD_INSUFFICIENT_MEMORY
2019-10-10 19:02:24 +02:00
Martine S. Lenders
18597c4ab4
tests/gnrc_ipv6_ext_frag: update BOARD_INSUFFICIENT_MEMORY
2019-10-10 17:09:35 +02:00
Martine S. Lenders
07a6b5425e
tests/gnrc_ipv6_ext_frag: add test for nth frag with full rbuf first
...
Adds a test case for when the following conditions cause a crash:
- a subsequent fragment is received before the first
- the reassembly buffer is currently filled up when another fragment of
a different datagram arrives and thus needs to be cached out to make
room for the new reassembly
2019-10-10 16:41:47 +02:00
Martine S. Lenders
40f721a4b8
tests/gnrc_ipv6_ext_frag: move static const to global space
2019-10-10 16:19:55 +02:00
Martine Lenders
f89e0b7b31
tests: prepare for RIOT-OS/Release-Specs#137
2019-10-10 14:57:31 +02:00
Benjamin Valentin
41745859bb
tests: replace SLEEP define
...
The SLEEP define collides with an Arduino header file.
Rename the define to resolve the conflict.
2019-10-10 10:47:38 +02:00
Kees Bakker
57463d722a
driver/hd44780: black list Sodaq boards
...
The Sodaq boards support Arduino, but there are no ARDUINO_PIN_* defines.
2019-10-09 20:16:22 +02:00
Martine Lenders
238ebe3d37
Merge pull request #12350 from haukepetersen/opt_nimble_verokt19
...
pkg/nimble: bump NimBLE version
2019-10-09 11:18:07 +02:00
7794c29650
Merge pull request #12396 from mtausig/codestyle
...
Fix code style of crypto code
2019-10-09 08:00:25 +02:00
Mathias Tausig
89db40b563
sys/crypto: Fix code style
2019-10-08 20:58:52 +02:00
Gaëtan Harter
589d7e5a46
applications: remove mentions of jiminy-mega256rfr2
...
Remove the deprecated board from BOARD_BLACKLIST and BOARD_INSUFFICIENT_MEMORY.
2019-10-08 18:37:32 +02:00
Francisco
94e00328c1
Merge pull request #12343 from cladmi/pr/board/slwstk6000b/split
...
boards/slwstk6000b-*: split one board for each module
2019-10-08 17:41:15 +02:00
Gaëtan Harter
1ab5a9390d
boards/slwstk6000b-*: split one board for each module
...
Define one board for each of the available modules.
2019-10-08 16:33:27 +02:00
4c8b6288ce
tests/unittests/base64: add test case for empty buffers
2019-10-08 15:38:27 +02:00
Hauke Petersen
88459f5a92
tests/nimble_l2cap_server: change order in _on_data
...
Printing the 'Received ...' string takes a short while and it is possible
that data is received while the string is printed. It seems however that
NimBLE does not like to be without a mbuf ready for taking data while
receiving something, as this seems to lead to a memory leak somehow. Now
changing the order of actions inside the _on_data() function fixes this.
2019-10-07 17:52:11 +02:00
Martine Lenders
c3a85bb9ca
tests/gnrc_tcp: provide regression tests for fixed issues
2019-10-06 17:34:54 +02:00
Martine Lenders
e22084c420
tests/gnrc_tcp: prepare shared_func for scapy
2019-10-05 15:12:23 +02:00
Martine Lenders
00f7e52be6
tests/gnrc_tcp: fix sudo error message
2019-10-05 15:12:23 +02:00
Ken Bannister
033b60b2d0
Merge pull request #11189 from leandrolanzieri/gcoap_link_format_options
...
sys: Add Link Format module
2019-10-05 06:46:15 -04:00
Martine Lenders
55143bb017
tests: fix copyright attribution and doc
...
While looking at tests/gnrc_ipv6_ext_frag again while writing
RIOT-OS/Release-Specs#137 , I noticed that several of tests that I
definitely wrote myself from scretch are attributed wrong (and
sometimes even documented wrong). I guess this was caused by just
copy-pasting the files...
2019-10-04 20:58:57 +02:00
Kevin "Tristate Tom" Weiss
4b7c5915ec
Merge pull request #10953 from gschorcht/sys/shell/heap_cmd/pr
...
sys/shell: add heap command
2019-10-04 13:49:57 +02:00
Leandro Lanzieri
3ca6a28e04
tests: Add unit tests for clif module
2019-10-04 11:35:52 +02:00
Martine Lenders
e9e0001239
Merge pull request #11930 from brummer-simon/gnrc_tcp-improve_tests
...
gnrc_tcp: test improvement
2019-10-03 15:40:16 +02:00
Simon Brummer
56998e822a
gnrc_tcp: test improvement
2019-10-03 15:18:28 +02:00
30457e4134
tests/unittests: exclude arduino-mkrwan1300
2019-10-03 09:34:34 +02:00
630e7ba053
tests/pkg_ubasic: improve test output regex
...
The test application now correctly prints float value, with a 3 digits precision. The python test script now verifies the run time value printed for each test is following the x.xxx pattern.
2019-10-02 15:58:20 +02:00
0e7c3bd2b7
Merge pull request #12358 from kaspar030/tests_pkg_ubasic_add_float
...
tests/pkg_ubasic: add print_float dependency
2019-10-02 15:55:57 +02:00
5653e89a3a
Merge pull request #12357 from aabadie/pr/tests/pkg_ubasic
...
tests/pkg_ubasic: increase timeout value, per test
2019-10-02 14:37:46 +02:00
Gunar Schorcht
37debfd655
tests/heap_cmd: blacklist arduino-nano due to memory limit
2019-10-02 14:21:35 +02:00
Gunar Schorcht
edae6b5c09
tests/heap_cmd: shell-based heap function test app
2019-10-02 14:21:35 +02:00
b05173b5f7
tests/pkg_ubasic: add print_float dependency
2019-10-02 13:41:52 +02:00
74e6b73ecb
tests/pkg_ubasic: increase timeout value, per test
...
On samr30-xpro, the third test requires 150 seconds to complete
2019-10-02 13:07:58 +02:00
Jannes
33a98100a9
drivers/opt3001: Initial support
2019-10-02 10:06:28 +02:00
Dylan Laduranty
aed628f08b
Merge pull request #11486 from benpicco/saml21-lpram
...
cpu/saml21: Make Low-Power SRAM available to programs
2019-10-01 21:02:42 +02:00
Gunar Schorcht
02d81b717e
Merge pull request #12063 from maribu/i2c_release
...
drivers/periph/i2c: Updated i2c_release() to return void
2019-10-01 19:50:38 +02:00
Benjamin Valentin
2ff7e03a94
tests/periph_backup_ram: add test for the Backup RAM feature
...
The test will put a device to sleep, then wake it up to see if
the backup memory was retained.
2019-10-01 18:42:56 +02:00
Gaëtan Harter
66300b2f72
tests/README.md: add documentation about uart interaction
...
Add some documentation about tests using `cleanterm` and what guarantees
it gives.
2019-10-01 14:13:02 +02:00
Gaëtan Harter
1fce298441
tests/test_tools: test receiving an empty line
...
Test receiving an empty line.
It was before not possible with `pyterm` but is fixed by previous
commit.
2019-10-01 14:13:02 +02:00
Gaëtan Harter
d33e2d215e
tests/test_tools: test to get a command return value
...
Get the output of a one line command without other garbage messages.
2019-10-01 14:13:02 +02:00
benpicco
3f0dfc14ac
Merge pull request #11085 from bergzand/pr/usb/cdcacm
...
usbus: Add CDC-ACM (Serial console) function
2019-10-01 11:22:54 +02:00
Martine Lenders
f4cca412de
Merge pull request #12303 from miri64/sixlowpan_sfr/feat/initial
...
sixlowpan_sfr: initial import Selective Fragment Recovery definitions
2019-10-01 09:46:25 +02:00
Martine S. Lenders
38571c66fe
tests: add unittests for net/sixlowpan/sfr.h helpers
2019-10-01 08:45:19 +02:00
Martine Lenders
db8dcaee48
Merge pull request #12325 from miri64/gnrc_sixlowpan_frag_vrb/enh/rm-out_dst
...
gnrc_sixlowpan_frag_vrb: re-use now unused super::dst for out_dst
2019-10-01 07:55:49 +02:00
Frank Hessel
64ac490fc9
tests/driver_adt7310: Add explicit cast required for llvm
2019-09-30 22:31:15 +02:00
c6447b73dc
test/usbus_cdc_acm_stdio: USB CDC ACM STDIO test
2019-09-30 18:53:58 +02:00
Martine Lenders
04f59d6609
gnrc_sixlowpan_frag_vrb: re-use now unused super::dst for out_dst
2019-09-30 12:46:15 +02:00
Bas Stottelaar
acd9dfda01
tests/cpu_efm32_features: update test
2019-09-30 00:03:15 +02:00
benpicco
aebcef111d
Merge pull request #12300 from miri64/gnrc_sixlowpan_frag_vrb/fix/index
...
gnrc_sixlowpan_frag_vrb: fix for draft update
2019-09-29 19:27:20 +02:00
c72f286796
Merge pull request #12169 from maribu/blxxxpill
...
boards: Split off 128KiB version of bl*pill
2019-09-29 18:50:29 +02:00
Martine Lenders
a711852379
tests: unittests: remove duplicate static consts from VRB tests
2019-09-29 18:36:28 +02:00
Martine Lenders
99183da998
tests: unittests: adapt 6LoWPAN VRB tests
2019-09-29 18:31:43 +02:00
Marian Buschsieweke
5659d16a5a
tests: BOARD_WHITELIST, BOARD_INSUFFICIENT_MEMORY
...
Added new blackpill-128kib and bluepill-128kib to BOARD_INSUFFICIENT_MEMORY
and BOARD_WHITELIST where needed.
2019-09-29 17:06:01 +02:00
Marian Buschsieweke
ed85041a4b
examples/l2util: Updated BOARD_INSUFFICIENT_MEMORY
...
Linking works for both blackpill and bluepill
2019-09-29 17:00:28 +02:00
Martine Lenders
e9ff46b2ea
gnrc_sixlowpan_frag_rb: unify naming scheme
2019-09-28 12:11:54 +02:00
Martine Lenders
178f4af108
gnrc_sixlowpan_frag_rb: remove legacy defines
2019-09-28 12:07:24 +02:00
Martine Lenders
972e4938bc
gnrc_sixlowpan_frag_rb: use existing name scheme for private functions
2019-09-28 11:51:18 +02:00
Martine S. Lenders
49bd8678ed
gnrc_sixlowpan_frag_rb: remove public around former private functions
2019-09-28 11:51:18 +02:00
Martine S. Lenders
ec495528fe
gnrc_sixlowpan_frag: move private RB functions to RB module
2019-09-28 11:51:18 +02:00
68aae9c848
Merge pull request #12262 from cladmi/pr/cflags/fix_spaces_and_rebuild
...
makefiles: do not remove defines from CFLAGS
2019-09-28 09:42:56 +02:00
Martine S. Lenders
b5545fe334
gnrc_sixlowpan: include reassembly buffer only where needed
2019-09-27 21:11:36 +02:00
Gaëtan Harter
d6b109f720
tests/build_system_cflags_spaces: test CFLAGS macros handling
...
This tests passing CFLAGS with spaces to an application and also that
even if the CFLAGS are defined after Makefile.include, they trigger
a rebuild when modified.
This includes an example how to pass macros with spaces to a docker
build.
The test as both an automated part for the CFLAGS with spaces, and a
manual part for the two other features.
2019-09-27 19:29:07 +02:00
Martine Lenders
aa84406ac1
Merge pull request #9940 from miri64/tests/enh/rgb2hsv-black
...
tests/unittests: test black corner case for color_rgb2hsv()
2019-09-27 15:02:10 +02:00
Hauke Petersen
09faa328f9
tests: add distinct test app for nrfmin driver
2019-09-27 11:49:43 +02:00
Martine Lenders
2c9ac91903
tests/unittests: test black corner case for color_rgb2hsv()
...
Tests a (currently undocumented) behavior of `color_rgb2hsv()`, that a
black RGB value (all zero) causes the HSV value to be all zero.
2019-09-27 09:35:39 +02:00
Martine Lenders
ac9e80cfd0
Merge pull request #11401 from miri64/tests/enh/i11398-testcase
...
tests: provide test case for malformed IEEE 802.15.4 packets
2019-09-26 16:55:55 +02:00
Martine Lenders
aaaa8a21ed
tests: provide testcase for issue 11398
2019-09-26 15:56:47 +02:00
Dylan Laduranty
9c8cfaa02a
tests: add SAMR34 entry in BOARD_INSUFFICIENT_MEMORY
...
add samr34-xpro if test doesn't fit in its memory
2019-09-26 10:48:03 +02:00
0170d1c5da
Merge pull request #11969 from fjmolinas/pr_nucleo_f303k8_tests
...
tests: fix tests for nucleo-f303k8
2019-09-25 13:43:10 +02:00
f8922d80c3
tests/periph_wdt: fix upper limit format for print
2019-09-20 20:45:42 +02:00
Benjamin Valentin
a4baf45da1
tests/periph_wdt: only test powers of two
...
Some watchdog implementations do not support arbitrary precision
for timeouts.
Using powers of two seems like a good common denominator.
2019-09-20 19:04:41 +02:00
Francisco Molina
ce300ca6fd
tests: fix tests for nucleo-f303k8
...
- Decrease default stack size for pthread_cooperation and
cp11_condition_variable
- Reduce number of problems for thread cooperation and remove
from insufficient memory list
2019-09-20 17:01:08 +02:00
661fdc6c1b
tests/nimble_l2cap: remove unused debug include
2019-09-20 09:00:32 +02:00
4d2d4c5bb3
tests/nimble_l2cap: fix not needed cast
2019-09-20 09:00:13 +02:00
f6dc8a3ea8
tests/periph_pwm: fix not needed cast
2019-09-20 08:59:43 +02:00
Dylan Laduranty
f276328491
Merge pull request #12267 from bergzand/pr/usbus/auto_tests
...
usbus: Add automated test
2019-09-19 09:52:48 +02:00
e3123f352e
tests/usbus: Add automated test for usbus init
2019-09-19 09:29:54 +02:00
Martine Lenders
5631b698db
Merge pull request #11623 from miri64/gnrc_ipv6_ext/feat/ipv6-frag
...
gnrc_ipv6_ext_frag: Initial import of IPv6 fragmentation
2019-09-17 19:27:38 +02:00
Martine Lenders
e62bb9c414
tests: provide tests for gnrc_ipv6_ext_frag fragmentation
2019-09-17 18:55:18 +02:00
Martine Lenders
1a89829cc7
Merge pull request #12254 from aabadie/pr/tests/useless_ci_whitelist
...
tests: remove remaining use of "TEST_ON_CI_WHITELIST += all"
2019-09-17 10:47:06 +02:00
Martine Lenders
269af28599
tests: provide initial tests for gnrc_ipv6_ext_frag
2019-09-16 19:13:19 +02:00
43717c7b2b
tests: remove useless global board test on ci whitelist
2019-09-16 19:02:02 +02:00
Gaëtan Harter
be7ce7ea99
tests: re-enable utf-8 tests on native
...
The docker image should now be configured with LC_ALL|LANG=C.UTF-8
and used in murdock.
2019-09-16 12:29:15 +02:00
benpicco
6c95081e42
Merge pull request #10556 from gschorcht/drivers_pca9685
...
drivers: support for NXP PCA9685 I2C 16-channel, 12-bit PWM controller
2019-09-15 19:20:29 +02:00
Juan I Carrano
75c47a8dc7
Merge pull request #12216 from benpicco/cleanup-test_malloc
...
tests/malloc: cleanup
2019-09-13 12:03:48 +02:00
